Treadstone 255lph High Pressure In-tank Fuel Pump, Inline 342 Style (Universal Fitment)
You save % ()
TRE255 Treadstone 255lph High Pressure In-tank Fuel Pump 342 Style. Drop in fitment for many applications. Flows up to 255lph, able to support approx 500hp, and is E85 Compatible! The Treadstone 255lph high pressure pumps are an in-tank electric fuel pump that fit a wide variety of applications and bolts right in to existing fuel pump hanger assemblies.(some modification necessary)
At 40psi of fuel pressure, the pump is able to deliver 255 liters of gas per hour. This pump is a perfect upgrade for those needing extra flow without the current draw of the much larger 340lph units. These come standard in the majority of our turbo kits, ie. 350Z, G35, Spec-V, and many Honda kits. Universal fitment kit is included (Filter, Wiring Pigtail, Rubber Hose, (2) Clamps, Rubber Grommet) but may not fit all applications where stock fuel pick up sock will still need to be retained.
- Inline Inlet Configuration
- 255 Liters of fuel per hour (lph)
- E85 Compatible
- Up to 500 HP(applications may vary)
- Can be used with Carbureted or EFI applications
- Can be used in pulse modulated applications
- Universal fitment kit included.
We are confident in the quality of our pumps and will warranty our pumps for 3 years from date of purchase. Must be original purchaser and be verified in our system.
The performance of a fuel pump is determined by the precision of the components that are engineered and fabricated. All Treadstone fuel pumps are engineered for maximum performance and high flow and pressure specifications. All of our pumps use a composite and steel rotor for maximum reliability and quiet operation, as well as improved efficiency and longer life. Our turbine fuel pumps provide stable fuel flow, and maximum performance under even the most severe operating conditions. Treadstone Turbine Fuel Pumps also operate at lower amp ratings compared to traditional rollervane or gerotor pumps, and are more efficient. All of our components are manufactured under strict quality control standards. Each of the components for our pumps are rigorously tested and calibrated for maximum performance. Once assembled, each pump is tested to ensure proper flow volume, noise levels, pressure, and under-load performance.
- Rotor: Siliconized Plate, Copper, Steel, and Composite
- Commutator: Copper
- Casing Material: S.Steel
- Inside Impeller: Hard Anodized Aluminum
- Inside Impeller Design: Single Scroll Turbine
- Top & Bottom: Composite
- Outside Diameter: 39mm OD
Important Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.