Special Cyber Week Hours
Mon-Fri 6am - 6pm
+1-888-627-3736 Speak To An Expert
Choose Your Car 
  • KW Coilover Kit Variant 1 Inox-Line | 2006-2010 BMW 3-Series (10220032)
  • KW Coilover Kit Variant 1 Inox-Line | 2006-2010 BMW 3-Series (10220032)
  • KW Coilover Kit Variant 1 Inox-Line | 2006-2010 BMW 3-Series (10220032)
  • KW Coilover Kit Variant 1 Inox-Line | 2006-2010 BMW 3-Series (10220032)
  • KW Coilover Kit Variant 1 Inox-Line | 2006-2010 BMW 3-Series (10220032)

    MAP price match guarantee Unbeatable Price Guarantee
    no codes, no bs, just parts

    KW Suspension

    KW Coilover Kit Variant 1 Inox-Line | 2006-2010 BMW 3-Series

    PART# KWS 10220032
    We Price Match!

    Contact us to ensure you're getting the right part for your car at the absolute best pricing on earth!

    Email - sales@maperformance.com
    Phone 1(888)627-3736



    $ 1,424.99   $ 1,499.99
    Cyber Week Savings 5% ($ 75.00)

    Built To Order Free delivery by , to your door when ordered within hrs and mins
    Fits Your
    MAP Loyalty: Earn $ 28.50 Toward Next Purchase!

    Coilover Kit Variant 1 Inox-Line by KW

    Sporty handling combined with outstanding looks. with factory pre-configured damping.
    The KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure not just the car's life.

    Continuous lowering
    With the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

    The benchmark for tuning fans
    KW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. with the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

    Setup Factory pre-configured damping setup
    The KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

    Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are Show & Shine events are interested in the KW Variant 1 inox-line.

    Features

    • Optimally pre-adjusted
    • Sporty and comfortable dampening technology
    • Stainless steel technology inox-line
    • Material: Stainless steel
    • Individually height adjustable
    • TÜV-tested adjustment range
    • Ready to install complete solution
    • High quality components for a long durability
    • Complete documentation for easy handling

    Applications

    • 2006 BMW 325i Base
    • 2007-2010 BMW 328i Base
    • 2006 BMW 330i Base
    • 2009-2010 BMW 335d Base
    • 2007-2010 BMW 335i Base

    What's In The Box?

    • Coilover Kit Variant 1 Inox-Line

    Installation Instructions

    Coilover Kit Variant 1 Inox-Line by KW

    Sporty handling combined with outstanding looks. with factory pre-configured damping.
    The KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure not just the car's life.

    Continuous lowering
    With the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

    The benchmark for tuning fans
    KW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. with the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

    Setup Factory pre-configured damping setup
    The KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

    Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are Show & Shine events are interested in the KW Variant 1 inox-line.

    Features

    • Optimally pre-adjusted
    • Sporty and comfortable dampening technology
    • Stainless steel technology inox-line
    • Material: Stainless steel
    • Individually height adjustable
    • TÜV-tested adjustment range
    • Ready to install complete solution
    • High quality components for a long durability
    • Complete documentation for easy handling

    Applications

    • 2006 BMW 325i Base
    • 2007-2010 BMW 328i Base
    • 2006 BMW 330i Base
    • 2009-2010 BMW 335d Base
    • 2007-2010 BMW 335i Base

    What's In The Box?

    • Coilover Kit Variant 1 Inox-Line

    Installation Instructions

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    MAP Limited Lifetime Warranty

    1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship.

    2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review.

    3.) You must create a support ticket to acquire your return authorization number prior to returning the product.

    4.) Warranty claims will not be honored if the product was not purchased through an approved dealer.

    For warranty evaluation please create a support ticket via this form here.

    We use cookies to offer a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Please review our privacy policy & cookies information page.  If you continue you consent to our privacy policy & use of cookies.Accept

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia or the UK. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within your country. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within California. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.