Fuel Injection Performance Air Intake Kit
2000-2007 Models. AP1 & AP2
The Fuel Injection Performance Kit (FIPK) was designed to promote performance in fuel injected stock engines by creating air filtration with the least resistance in air flow. The benefit of low resistance air filters can be felt directly in throttle response. In addition to the filter, these kits have uniquely designed adapters. These adapters create a radius entry which reduces restriction and allows the engine to ingest an even greater volume of air. To design such an assembly, two factors must be considered: the air filtering element and the air filter adapter. The FIPK combines a precision high-flow K&N air filter element with other necessary components, depending on the specific application.
Filters Air More Effectively Than A Stock Paper Element!
Allows More Air into Engine!
Easy Bolt-On Installation!
Million Mile Limited Warranty!
HP & Torque: 7-8 HP/10 lb ft Torque
Installation: Designed to Replace the Restrictive Factory Air Filter Housing. This is a BOLT-ON Kit. Installation Normally Takes 20-30 Minutes and Includes All the Necessary Hardware. Only Regular Hand Tools Required. Comes With Complete Instructions.
Tech Notes: Filter is cleaned by first brushing off any large embedded dirt. Then spray on the K&N cleaner and let it soak for 10 minutes. Next, Rinse off the element with LOW pressure water. (Always flush from the clean side to the dirty side.) Then allow filter to dry NATURALLY. After filter has dried re-oil with K&N air filter oil only. Apply evenly to entire filter making sure to oil down into each pleat. Then re-install making sure the element seats properly in the filter case.
50 States Smog Legal