Haltech Nexus Plug-in ECU | 2003-2008 Mazda RX-8 (HT-231401)

Nexus Plug-in ECU for 2003-2008 Mazda RX-8 by Haltech

The Haltech Nexus Mazda RX-8 Plug-in, as the name suggests, plugs directly into the Mazda harness, and nestles neatly into factory location.

Unlock enhanced capabilities with "OEM Plus" functionality via the auxiliary connector, enabling features such as O2 Control, Flex Fuel, Oil Pressure monitoring, Fuel Pressure sensing.

And for serious drivers, the Nexus ECU unleashes potent Race Functionality, including CO2 Boost Control, Race Timer, Advanced Torque Management, Launch Control, Nitrous Control, and 128MB of onboard data logging.

Features

• 4 X Digital Pulsed Outputs
• 4 X Synchronised Pulsed Inputs
• 4 X Analogue Voltage Inputs
• 2 X Half Bridge Outputs
• 1 X Onboard Wideband
• 2 X Sensor Ground
• 2 x 12V Output
• 2 x 5V Output
• Drive By Wire Throttle Support
• Single Channel Onboard Wideband Control - Supports LSU4.9/NTK
• Wi-Fi
• 4 channel onboard oscilloscope
• Data logging 128MB
• Flex Fuel
• Closed Loop O2 Control
• Dual Knock Control
• Variable Cam Control
• Long term learning

Supported OEM Functionality

• Drive-By-Wire / Electronic throttle
• Alternator control
• Cruise control switch
• Oil Metering Pump (OMP)
• Secondary Shutter Valve (SSV) solenoid
• Variable Dynamic Intake (VDI) solenoid
• Variable Fresh Air Duct (VFAD) solenoid
• Auxiliary Port Valves (APV) motor
• Electronic Power Steering
• DSC / Traction control
• Instrument cluster
• Rear O2 sensor (used as narrowband)
• ABS module (Note: Limited support. Currently we support the AUDM, JDM, USDM, and two different European versions of the ABS module. Other modules will have different CAN addressing.) ABS modules using K-line (instead of CAN) is not supported.
• Immobiliser light on dash (Note: We don't support the immobiliser, but the Haltech Plug-in ECU will still function and run the car regardless of the factory immobiliser and can prevent the immobiliser warning light from turning ON when the factory ECU is replaced.)

Applications

• 2003-2008 Mazda RX-8 13B-MSP Renesis 6-port & 13B 4-port

What's In The Box?

• 1 - Nexus Plug-in Mazda RX-8 ECU
• 1 - Air temperature + Wideband expansion harness 2.5m (8')
• 1 - Air temperature sensor (1/8' NPT)
• 1 - Aluminium bung for air temperature sensor
• Mounting brackets and hardware to suit
• 1 - 3mm Vacuum hose 2.5m (8')
• 1 - 3mm Aluminium Vacuum T piece
• 1 - Haltech USB-C cable
• 1 - Quick start guide

Warranty

• Limited Manufacturers Warranty