You've probably read somewhere on the internet that a strut tower brace never does anything but look pretty. You're about to read otherwise. Armed with a strong background in vehicle dynamics and chassis design, we've spent months understanding the BRZ/FR-S chassis, testing different designs, collecting data and measuring performance. With the help of the FT86Club community, we've developed a strut tower brace that works.Quick SpecsLaser cut, CNC bent brackets ensure perfect fitMild steel construction provides maximum stiffnessRigid design prevents unnecessary slop and tolerance stackingDurable DuPont powdercoatLegal in autocross classes that allow a strut tower bar but no other modificationInstallation in minutes with only a single toolDesignOur design requirements for this project were simple. The GrimmSpeed Strut Tower Brace must provide additional stiffness between the strut towers, enhancing stability and sharpening steering response. We began with testing both on the street and by statically flexing the chassis in the shop. Tweaking the chassis manually and using our FARO Arm to plot critical points in CAD, we were able to identify the weak points in the system. What we found was interesting. The OEM triangulation bars actually function very well. So, while the allure of a beautiful 3-point brace was tempting, the data spoke loud and clear: a simple 2-point brace was the right solution. With that, we set out to create a clean, simple and cost effective solution.MaterialsEnd brackets are laser cut from 3/16" steel and precision CNC bent. These brackets were sized to provide maximum strength and stiffness without compromising thread engagement with the vehicle. Cross tubes are CNC laser cut to length from .125in wall tubing. Mild steel, being both the viable material that is both economical as well as the well-suited for the job, was an easy choice. Contrary to popular belief, mild steel offers greater stiffness than stainless steel and while stainless steel offers higher yield strength, in this particular application, we're nowhere near those types of forces. The assemblies are all robotically welded in the same fixture for unbeatable accuracy and repeatability. Each finished brace is coated with a durable DuPont textured powdercoating. The cherry on top, so to speak, is that we've laser cut the GS logos from stainless steel, so you're free to polish the coating off of it for a unique look without worry about rust.