Diode Dynamics LED Rear Turn Signals | 2003-2006 Mitsubishi Evo 8/9, 2008-2015 Mitsubishi Evo X and 2022-2023 Subaru WRX (DD0108P)

2003-2006 Mitsubishi Evo 8/9, 2008-2015 Mitsubishi Evo X and 2022-2023 Subaru WRX LED Rear Turn Signals by Diode Dynamics

LED Indicators. The factory incandescent turn signals on the Subaru WRX illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the WRX.

Brightness. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house and provide you with allhe ers to compare.

Correct Color. You'll see that we offer both a red and amber option, which meets/DOT "amber" and "red" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your WRX, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.

Reduced Load. When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the WRX looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to a wer power draw. This causes a "hyperlinks turn signal, which can be corrected with LED Resistors or an LED Flasher.

The most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but do requirefactory signals. One resistor is needed to replace each turn signal bulb.

You may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles, hese modules cannot be replaced. If it's possible to replace the flasher on the WRX, you'll see the listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.

Reliability. Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your WRX. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.

Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves on offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!

Features

• Modern LED appearance with instant on and off
• Multiple brightness levels available

Benefits

• Direct replacement for Subaru WRX rear turn bulbs
• Plug and play, no modification with factory 7440 bulb size

Applications

• 2022-2023 Subaru WRX
• 2008-2015 Mitsubishi Evo X (Rear Turn Signals)
• 2003-2006 Mitsubishi Evo 8/9 (DD0112P/DD0108P/DD0108P as Tail Lights)
• DD0112P, DD0108P, and DD0115P can be used as Tail Lights for the Evo X as well

What's In The Box?

• 1 - LED Rear Turn Signals

Warranty

• Diode Dynamics' Standard Limited Warranty