MLS Head Gasket by Cometic
The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses
Stainless steel for increased strength, it’s ability to rebound and corrosion resistance. The outer layers of
the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed
to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton
coating is heat resistant to 2500C or 4820F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer,
which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum
heads to cast iron blocks and aluminum heads to aluminum blocks.
The composition of MLS will also withstand the shearing forces created by aluminum heads on
cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the
sealing surface allowing for measurable reduced bore distortion.
Features
- Comprised of three layers of Stainless Steel
- Uses Stainless steel for increased strength
- Outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based
material
Benefits
- Corrosion resistance
- Viton coating is heat resistant to 2500C or 4820F.
