Special Cyber Week Hours
Mon-Fri 6am - 6pm
+1-888-627-3736 Speak To An Expert
Choose Your Car 
  • ATP GEN2 GTX3076R Bolt-On Turbo Kit - Internally Gated - 700HP | 2008-2015 Mitsubishi Evo X (ATP-VEVO-163/4)
  • ATP GEN2 GTX3076R Bolt-On Turbo Kit - Internally Gated - 700HP | 2008-2015 Mitsubishi Evo X (ATP-VEVO-163/4)
  • ATP GEN2 GTX3076R Bolt-On Turbo Kit - Internally Gated - 700HP | 2008-2015 Mitsubishi Evo X (ATP-VEVO-163/4)

    MAP price match guarantee Unbeatable Price Guarantee
    no codes, no bs, just parts

    ATP Turbo

    ATP GEN2 GTX3076R Bolt-On Turbo Kit - Internally Gated - 700HP | 2008-2015 Mitsubishi Evo X

    PART#
    We Price Match!

    Contact us to ensure you're getting the right part for your car at the absolute best pricing on earth!

    Email - sales@maperformance.com
    Phone 1(888)627-3736



    $ 2,588.24

    Built To Order Free delivery by , to your door when ordered within hrs and mins
    Fits Your
    MAP Loyalty: Earn $ 51.76 Toward Next Purchase!

    Mitsubishi Evo X GEN2 GTX3076R Turbo Kit - Bolt On Twinscroll - Internally Gated by ATP Turbo

    The Garrett® Evo X Turbo Upgrade allows you to push your AWD, rally-bred monster up to an estimated 700HP+ with the latest technology dual ball bearing GEN2 GTX3076R. Each turbo has been meticulously designed to be a bolt-on upgrade with no fabrication, cutting or welding required.

    This Evo X Turbo Upgrade features a specially designed twin-scroll turbine housing that mates up directly to the Evo X's stock exhaust manifold as well as the stock exhaust down pipe to allow for aftermarket exhausts to be used without worrying about fitment.

    The turbine housing allows for the retention of the stock exhaust heat shield for better temperature control as well as a stealth look. The ported shroud compressor housing reduces the occurrence of surge during operation and mates directly to the intake piping as well as the stock outlet position. The Garrett® patented dual ball bearing center housing is standard on both turbocharger options for unmatched power handling and unbeatable response.

    Features

    • Horsepower (estimated): 700+
    • Compressor Wheel Inducer: 58mm
    • Compressor Wheel Exducer: 76mm
    • Compressor Wheel Trim: 58
    • Compressor Housing A/R: 0.60
    • Turbine Wheel Diameter: 60.0mm
    • Turbine Housing A/R: 0.73 or 0.94

    Please Note

    • Turbos with BIG wheel combinations such as these require good airflow in and out of them in order to do their job efficiently. Whenever possible, run the largest diameter inlet piping (3" preferred) to allow adequate airflow into the turbo and 3" diameter piping out of the turbine exhaust.
    • Failure to free up the turbo's flow potential can force the turbo to "top out" in power prematurely and undoubtably place your entire engine/turbo against the perpetual "wall" and always short of reaching maximum power.

    Applications

    • 2008 - 2015 Mitsubishi Evolution X

    What's In The Box?

    • 1 - GEN2 GTX3076R Turbocharger
    • 1 - Inlet elbow
    • 1 - Oil drain line
    • Water lines
    • Gaskets and necessary hardware
    • Installation Instructions

    References

    Warranty

    • Manufacturer Standard Warranty

    Mitsubishi Evo X GEN2 GTX3076R Turbo Kit - Bolt On Twinscroll - Internally Gated by ATP Turbo

    The Garrett® Evo X Turbo Upgrade allows you to push your AWD, rally-bred monster up to an estimated 700HP+ with the latest technology dual ball bearing GEN2 GTX3076R. Each turbo has been meticulously designed to be a bolt-on upgrade with no fabrication, cutting or welding required.

    This Evo X Turbo Upgrade features a specially designed twin-scroll turbine housing that mates up directly to the Evo X's stock exhaust manifold as well as the stock exhaust down pipe to allow for aftermarket exhausts to be used without worrying about fitment.

    The turbine housing allows for the retention of the stock exhaust heat shield for better temperature control as well as a stealth look. The ported shroud compressor housing reduces the occurrence of surge during operation and mates directly to the intake piping as well as the stock outlet position. The Garrett® patented dual ball bearing center housing is standard on both turbocharger options for unmatched power handling and unbeatable response.

    Features

    • Horsepower (estimated): 700+
    • Compressor Wheel Inducer: 58mm
    • Compressor Wheel Exducer: 76mm
    • Compressor Wheel Trim: 58
    • Compressor Housing A/R: 0.60
    • Turbine Wheel Diameter: 60.0mm
    • Turbine Housing A/R: 0.73 or 0.94

    Please Note

    • Turbos with BIG wheel combinations such as these require good airflow in and out of them in order to do their job efficiently. Whenever possible, run the largest diameter inlet piping (3" preferred) to allow adequate airflow into the turbo and 3" diameter piping out of the turbine exhaust.
    • Failure to free up the turbo's flow potential can force the turbo to "top out" in power prematurely and undoubtably place your entire engine/turbo against the perpetual "wall" and always short of reaching maximum power.

    Applications

    • 2008 - 2015 Mitsubishi Evolution X

    What's In The Box?

    • 1 - GEN2 GTX3076R Turbocharger
    • 1 - Inlet elbow
    • 1 - Oil drain line
    • Water lines
    • Gaskets and necessary hardware
    • Installation Instructions

    References

    Warranty

    • Manufacturer Standard Warranty

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    J.P.
    Garrett ATP GEN2 GTX3576R DBB

    Turbo is not installed yet is going very soon but thanks to map performance for the amazing fast shipping and amazing match price I always buy all my evo x stuff from map performance because with no question ask is the best of the best store for stock and aftermarket parts

    MAP Limited Lifetime Warranty

    1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship.

    2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review.

    3.) You must create a support ticket to acquire your return authorization number prior to returning the product.

    4.) Warranty claims will not be honored if the product was not purchased through an approved dealer.

    For warranty evaluation please create a support ticket via this form here.

    We use cookies to offer a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Please review our privacy policy & cookies information page.  If you continue you consent to our privacy policy & use of cookies.Accept

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia or the UK. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within your country. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within California. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.