Free shipping is available within the lower 48 states for orders totaling $199 or more. Simply select the free shipping option during checkout. Even though expedited shipping is not free we will still discount the free shipping option from the expedited shipping cost for you. This offer excludes shipments going to Alaska, Hawaii, Military Boxes, and items too large to ship via UPS or USPS. These items are usually large freight or bulky items such as engine blocks, etc.
Orders under $400 ship without signature requirement.
Orders over $400 Ship with a signature requirement only.
Features & Benefits: • +30HP Max / +50lb/ft Torque • Outflows Factory Intake by 48% • Oiled Pro 5R for Maximum Performance • Heat Shield Attaches to the Lower Half of Factory Air Box for Easy Installation • Roto-Molded Intake Tube for Better Heat Insulation • 18-Gauge Powder-Coated Heat Shield to Block Hot Engine Air • No Cutting or Drilling on OEM Parts for Faster Installation
One-Piece Filter Heat Shield: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that minimizes warm engine air for maximum performance. The heat shield attaches to the lower half of the factory airbox to provide direct airflow to the filter.
Roto-molded Intake Tube: This system uses a C.A.D designed, dyno-tuned, roto-molded intake tube that replaces the stock intake tract and directs increased airflow with improved volumetric efficiency for maximum performance. A sensor pad block-off plate is included to maintain fitment on early 2011-2012 Silverado HD/Sierra HD models.
Large 7"x10" Oval Inverted Top Filter: This intake utilizes a large 7"x10" oval base filter oval inverted top. A 5-1/2" diameter opening provides for maximum airflow. This washable/reuseable 5-layer progressively finer mesh cotton gauze oiled media air filter provides maximum airflow for increased horsepower and torque.
Hassle-Free Installation: aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations, minimizing the use of unnecessary hardware. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Features & Benefits: • +30HP Max / +50lb/ft Torque • Outflows Factory Intake by 48% • Oiled Pro 5R for Maximum Performance • Heat Shield Attaches to the Lower Half of Factory Air Box for Easy Installation • Roto-Molded Intake Tube for Better Heat Insulation • 18-Gauge Powder-Coated Heat Shield to Block Hot Engine Air • No Cutting or Drilling on OEM Parts for Faster Installation
One-Piece Filter Heat Shield: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that minimizes warm engine air for maximum performance. The heat shield attaches to the lower half of the factory airbox to provide direct airflow to the filter.
Roto-molded Intake Tube: This system uses a C.A.D designed, dyno-tuned, roto-molded intake tube that replaces the stock intake tract and directs increased airflow with improved volumetric efficiency for maximum performance. A sensor pad block-off plate is included to maintain fitment on early 2011-2012 Silverado HD/Sierra HD models.
Large 7"x10" Oval Inverted Top Filter: This intake utilizes a large 7"x10" oval base filter oval inverted top. A 5-1/2" diameter opening provides for maximum airflow. This washable/reuseable 5-layer progressively finer mesh cotton gauze oiled media air filter provides maximum airflow for increased horsepower and torque.
Hassle-Free Installation: aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations, minimizing the use of unnecessary hardware. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
MAP Limited Lifetime Warranty
1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship.
2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review.
3.) You must create a support ticket to acquire your return authorization number prior to returning the product.
4.) Warranty claims will not be honored if the product was not purchased through an approved dealer.
For warranty evaluation please create a support ticket via this form here.
Hello!
Unfortunately due to vendor restrictions we are unable to sell this brand within Australia or the UK.
If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.
Hello!
Unfortunately due to vendor restrictions we are unable to sell this brand within Australia.
If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.
Hello!
Unfortunately due to vendor restrictions we are unable to sell this brand within your country.
If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.
Hello!
Unfortunately due to vendor restrictions we are unable to sell this brand within California.
If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.
