Morimoto Mopar Harness | Multiple Fitments (H105)
MorimotoThe new Mopars: May be the best ones yet, but when it comes to upgrading anything in the lighting system; it's nothing but a nightmare. Thankfully though after many attempts, the new Morimoto 15+ Mopar Spec harness does the trick to keep an aftermarket HID system running smoothly. Lamp Out: When upgrading to HID lights on the 2015+ Mopar vehicles, the car's ECU senses a change in the resistance of the headlight circuit and cuts power to anything but the stock 9012 halogen bulbs after a few minutes in use. Good luck with basic "canbus" ballasts or other more conventional "canbus" harnesses. They wont work, many will claim success, many have failed! This is the only setup on the market that we know of that does the trick on 2015+ Chrysler/Dodge/Jeep/Ram vehicles. Calibrated: The 15+ Mopar Spec harness is properly calibrated to tame the canbus system on the new Mopar vehicles. Using a quad configuration for it's load resistors that's unique only to this harness in conjunction with a special anti-flicker capacitor and twin relays - the harness will absorb any pulsing signals emitted from the stock output for uninterrupted relay function. No flickering or pulsing! Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). Regardless if you're using a Dodge Ram LED headlight kit or an HID system, this harness ensures nothing goes into panic mode! OEM Finish: Aside from being a technical masterpiece, it's also a work of art. With its braided TechFlex insulation, anodized and laser engraved relays, and 100% weather resistant dual relay pack to power the ballasts. it will surely look factory-fresh under the hood.
Features
- INPUT TRIGGER: 1x 9006 Male
- BALLAST OUTPUTS: 2x 9006 Female
- 12V POWER: 1x Nickel-Plated Ring-Type
- GROUND: 2x Nickel-Plated Ring-Type
- FUSE: Inline 25A
Applications
- FITMENTS: 9005, 9006, 9012, H10, H11
- VEHICLES: 2015+ Chrysler, Dodge, Jeep
- SYSTEMS: Bi-Xenon Projectors & Telescoping Hi/Lo HID Bulbs
- HALOGEN BULBS: Not Compatible
- OTHER BRANDS: May need High Beam Adapters
What's In The Box?
- Wiring: 1x 2015+ Mopar-Spec Wire Harness (Complete w/ 4 Load Resistors)
References
Warranty
- Warranty: 2 Years
