MAP Turbo Oil Drain Flange | Garrett GT series
Need Help Getting Started?
Call Or Text Our Experts at 651-927-4510
Contact Us By Email
Earn $0.50 In MAP Rewards!
MAP Turbo Oil Drain Flange / Garrett GT series
The fitting machined directly onto this flange conforms to ISO 8434-2/SAE J514/MIL-F 5509 standards will work with any standard -10 AN hose end. No other adapters or fittings will be required. Like all MAP products, these fittings are precision machined out of the strongest, airframe grade 7075 billet aluminum, and is 18-20% stronger than 6061 grade aluminum.
The patented design also gives additional strength to the flange while allowing better heat dissipation from the turbo, allowing it to run slightly cooler and prolonging the life of the turbocharger bearings.
The bolt-to-bolt spacing of this flange is 38.1 mm (1.5). Please check the bolt spacing of your turbo to ensure this fitting will work with your application.
Benefits
- 18-20% stronger than 6061 grade aluminum
- Allows better heat dissipation from the turbo
Applications
- These are compatible with all Borg Warner EFR Turbos
These fittings WILL NOT work on regular T3/T4 turbochargers!
What's In The Box?
- (1) Oil Drain Flange
- Installation Hardware
1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship. The purchaser will be responsible for sending the product back, after contacting MAPerformance and reporting the failure. Further instructions will be provided by MAPerformance.
2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review. Products that are factory coated must adhere to the break in process. Only products coated by MAPerformance will be covered. Products will not be covered if wrapped.
3.) MAPerformance “Limited Lifetime” Warranty does not apply to all products. Kits, packages, bundles, or any non fabricated parts and products by MAPerformance are not warrantied. Engines and engine assemblies are not warrantied. Cast components are warrantied for 3 years from purchase date.
Exactly what they said! Read details!