Kryptonite Death Grip Tie Rods | KRTR10

Tie Rod Bodies come Black powder coated and Laser Engraved, now with a black dust boot. Green dust boots are no longer available.

Engineered exclusively for the Extreme demands of today's Heavy Duty Truck. Built with pride in the USA to work with stock or modified suspension. Kryptonite Death Grip tie rods will fit any 2001-2010 2500/3500HD and Hummer H2 that has the center link mounted in the factory location, and can be upgraded in the future to accept the Kryptonite Centerlink.

Using superior components and engineering, these tie rods easily outperform the competition. Kryptonite series tie rods can be used with the Kryptonite series center link with our updated inner tie rod. This pair is for use with your factory center link.

In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite series tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite tie rods held up to an incredible 21000 pounds of pressure before pulling apart.

All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)

Note:

• Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required.
• ALL Kryptonite Products are build to order with a lead time of 2 to 6 weeks.
• Any canceled order after 24 to 48 hours will have a $50 cancellation fee.

Fitments:

• Chevrolet/GMC 2500/3500 HD & Hummer H2 2001-2010

Features:

• Heat treated chromoly nickel outer studs.
• Bulletproof, all steel inner ball sockets.
• Solid 1 1/4" Hexagon steel body.
• Left and Right hand jam nuts for the ultimate adjustability.