GrimmSpeed EJ25 DAVCS Head Gasket Set | 2008-2021 Subaru STI
GrimmSpeedSubaru EJ25 DAVCS Head Gaskets by GrimmSpeed
The GrimmSpeed Head Gaskets feature a multi-layer steel (MLS) construction, in which multiple grades are used to provide optimal surface and combustion chamber sealing as they are torqued down.
The top and bottom layers feature a Nitrile Rubberized Coating that helps accommodate a rougher RA surface finish of up to 50microinch. This acts to better seal the non-critical areas of the gasket. In addition, the gasket edge includes a folded stopper layer that allows for optimal sealing for the combustion chamber. This is done to help reduce the chances of combustion gasses causing head gasket failures under extremely high cylinder pressures that built engines can experience.
The gaskets are available in multiple thicknesses (.78, 1.1, 1.5mm) to help fine tune each individual build. In addition, the slightly oversized bore diameters will allow for up to 0.5mm overbore.
The EJ specific gaskets include enlarged center head bolt holes to accommodate up to a 13mm head studs. This is a popular upgrade option for many higher power builds, where additional cylinder head clamping force is needed.
Features
- Sold as a Set/Pair
- Die Cut Stainless Steel Multi-Layer Steel (MLS) Construction - Provides smooth edge finish and consistency from batch to batch, ±0.001” manufacturing tolerance
- Folded Stopper Layer to Better Seal the Combustion Chamber
- 0.25micron Nitrile Rubber Layer Coating - Reduces chances of leaking on imperfectly smooth mating surfaces over non-coated gasket
- Accommodates up to 100.0mm bore
- Compatible with up to 13mm, ½” studs
- 0.78mm, 1.1mm and 1.5mm thickness (after crushing)
Please Note: These particular gaskets are made for EJ25 DAVCS engines. Check these out instead if you have an EJ25 SAVCS engine.
Applications
- Subaru EJ25 DAVCS Engines
- 2008 - 2021 Subaru STI
What's In The Box?
- 2 - Head Gaskets
Warranty
- GrimmSpeed-branded products are warrantied to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.
