Full Race M10 Inconel T3/T4 Turbo Stud Kit (FR-UNI-TSHK-M10)

Inconel M10 Turbo/Manifold Stud Kit for T3 & T4 Turbochargers by Full Race

Tired of turbos loosening on the manifold? Professional and amateur racing teams agree: Full-Race’s M10 turbo hardware is the solution. Designed specifically for high performance turbocharged applications, this high quality A286 stud is heat treated, solution annealed and precipitation hardened. The nut is silver plated A4-70 grade, allowing it to be used without anti-seize (keeps long-term service removal possible).

By using 1.5 (standard pitch) on the manifold side and 1.25 (fine pitch) on the turbo side, the standard pitch thread will stay put in the manifold while the fine pitch 1.25 inconel nut will be easy to remove without dislodging/unthreading the stud from the flange. This works perfectly with your existing turbo manifolds which typically use 3/8-16 hardware (the old industry standard) – all you need to do is run a 10mm x 1.5 thread chaser through the 3/8-16 threads. *Using a tap instead of a thread chaser is very common, but may weaken the threads.

Features

• 1.5 Thread Pitch Manifold / 1.25 Thread Pitch Turbo Hardware
• Stud torque spec: 38 Nm +/- 3 Nm (28 ft/lbs)
• Nut torque spec: 57 Nm +/- 3 Nm (42 ft/lbs)
• Stud Overall Length: 40mm
• 1.5 Coarse Thread Length: 13mm
• 1.25 Fine Thread Length: 15.5mm
• Matched Heico-Lock Anti Vibration Washers Included

Please Note: This stud kit is designed specifically for T3 & T4 turbos.

Applications

• T3 & T4 Turbochargers

What's In The Box?

• 4 - Studs
• 4 - Nuts
• 4 - Washers

Warranty

• Manufacturer Standard Warranty