Mitsubishi Lancer Evolution 8/9 Plug n' Play Jumper Harnesses
Posted on 03 February 2015
Mitsubishi Lancer Evolution 8/9 Plug n' Play Jumper Harnesses by AEM
Once you have determined which AEM Infinity ECU will best support your Mitsubishi Evo VIII or IX M/T engine, you will need to purchase a Plug & Play adapter harness. AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor.[caption id="attachment_12429" align="aligncenter" width="365"] Click image above to BUY NOW![/caption] The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift.
The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. The Infinity-6 (Part # 30-7106) and -8h (Part # 30-7108) for Mitsubishi Evo race engines is even more affordable than its larger -8 and -10 version because it is designed for smaller racing engines using low impedance injectors up to 6 cylinders or race engines driving up to 8 high impedance injectors. It features a smaller footprint than the Infinity-8/-10 (5.855” x 5.55” x 1.8”) and a single, weatherproof 80-pin connector.
Look for more new quality built products from MAP and AEM Electronics in the future and let us know if you have any questions, concerns or just plain have parts you want to talk about!