Performance Auto Parts & Car Accessories | Unbeatable Prices Your One Stop Shop For Performance Auto Parts

Choose Your Car 

Minnesota's One Stop Performance Shop

Erik Blume  September 18 2019

Minnesota's automotive performance & tuning authority!

Minnesota High Performance Tuning Shop

Below is just a quick list of some of our more popular services.  We cater to performance enthusiasts seeking the highest quality work in the Twin Cities. MAPerformance has built our name by providing superior levels of customer service & support while maintaining an affordable shop rate. Not only will our experienced high performance technicians complete your project on time but they will also provide insight, tips and tricks to ensure you get the most of our your car both on and off the track!

Minnesota Engine Builder 5.3l Chevrolet V8
Turbochargers & Kits

Forced Induction is our specialty! MAPerformance is known for building & racing the quickest fastest and highest horsepower turbocharged imports, when we apply this knowledge to a domestic / V8 powered car the results are simply amazing!

Clutch Replacements & Upgrades

Our full time technicians fully understand that your car is your pride and joy. When replacing your clutch careful care is taken to ensure the clutch disc is installed properly and with out contaminating the disc surface. This care ensures excellent life out of your new performance clutch / flywheel and is just another reason so many St. Paul & Minneapolis residents choose MAPerformance for to repair and maintain their performance cars.

Timing Belt Replacement / Water Pump Replacements

We know this service may not be as exciting as a supercharger or nitrous install but ask anyone, they're absolutely the most important service you should not skimp on. We do it right the first time to get you back on the road faster than you thought possible!

Head Gasket Replacement / Head Stud Installs

If you're boosting your car you'll want to think about replacing your factory head bolts with some MAP or ARP Head Studs. When we start cramming all of that air into your cylinders the weakest link is almost always going to show itself.  In many cases head bolts stretch and your head gasket fails.

More Posts


  • Ron Martinson: April 24, 2019

    I have a 2011 Toyota Tacoma with 4 cylinder 2.7 can you turbocharge this engine?

  • Jay Dee: November 13, 2018


  • Morgen: October 02, 2018

    What is the ballpark price range of tuning to increase boost a little bit without harming the reliability significantly? 2006 Mazdaspeed 6 want to put it at about 7 pounds of boost

  • Philip Klammer: May 03, 2018

    Do you guys do nitrous installation for a Grand Prix gtp

  • Steven leisch: March 31, 2018

    I have a 2005 srt4 running on manual boost controller with a n2mb boost box, and i really have no knowledge of manual boost on these cars and have had it carted up from texas, would like to get the boost box working and programmed so i am not running to lean under boost conditions. And possibly a custom tune for 18psi on 91 non oxy gas.

  • ken johnson: March 11, 2018

    i have a 2009 infinity g37x coup. i would like to know if i can get a turbo installed in it. thanks

  • kong : February 22, 2018

    I have a 76 Toyota celica and want to swap in a 3SGE Beams engine, is this something you guys would consider doing?

  • Simon Guaman: February 21, 2018

    I have a 2005 Nissan 350z, it’s not performing well I want to get it check and trying to gain more power as well. Thank you

  • Dominic: May 01, 2017

    I have a 2.2l ecotec engine and am considering supercharging it. I wanted to ask if you might be able to tune my vehicle post supercharger install so that it runs most effectively. Thanks.

  • Tirece : April 26, 2017

    94 impala make it go to 400hp

  • Johnny Jones: November 02, 2016

    Engine work or replacement

Leave a comment

All blog comments are checked prior to publishing