Zeitronix ZT-2 and ZR-1 Wideband Gauge Package (Zt-2 + ZR-1)

Zeitronix
SKU:
Looking for the lowest price?

Give us a call to get the best prices and parts for your build. Or, just call us with a cool racing story...either way we're here.

Phone Call or Text 651-927-4510

Email - sales@maperformance.com

Fits Your:
FREE Delivery Expected by , when ordered within hrs and mins
Color Options
 Need Help Getting Started?
Call Or Text Our Experts at 651-927-4510

$409.00

Earn  $8.18 In MAP Rewards!

Zeitronix ZT-2 and ZR-1 Wideband Gauge Package

Zt-2 Model 2010 Wideband Datalogging System
The Zeitronix Wideband Air/Fuel ratio meter and datalogging system is a high quality, stand-alone system for use with carbureted and electronic fuel injection engines. Zt-2 Wideband Kits provide the best bang for your buck delivering unmatched quality, features and capabilities for very reasonable prices. Our system provides the accuracy of a Dyno Air/Fuel reading right in your vehicle as well as multiple engine parameters. Our base system is very easy to install and retails at $299 USD which includes the wideband oxygen sensor, controller, wiring hardware, and the software required to start datalogging and tuning immediately.

Supports Air/Fuel ratio as AFR/Lambda, plus RPM, Vacuum, Boost, Exhaust Gas Temperature, Throttle Position, 0-5 volt sensors, Air/Fluid temperature sensors and Oil/Fuel pressure sensors. Tune fuel injected and carbureted engines.

Very simple installation - connect two wires to +12V and ground and place the O2 sensor in the exhaust stream and you are ready to read AFR! A simple LED indicator displays off, warm-up and running modes.

Zt-2 Inputs/Outputs

  • Bosch Wideband O2 sensor Input
  • Linear Wideband Output AFR = Volts * 2 + 9.6
  • Serial data output to the Zeitronix LCD, ZR-1 AFR, and ZR-2 Multi-Gauge Displays
  • Serial data output for real time datalogging (PC laptop required)
  • RPM Input (tachometer, primary side ignition coil, crank, cam sensor).
  • The RPM input works in any car and any ignition system. No additional adapters needed!Wideband Oxygen Sensor
  • Simulated and adjustable Narrowband Output to feed a stock ECU
  • Throttle Position Sensor Input
    • 50 PSI (3.5 Bar) MAP Sensor, or 75 PSI (5.0 Bar) MAP sensor or 150 PSI (10 Bar) MAP sensor
  • Exhaust Gas Temperature (EGT) probe Input
  • User1 Input:
    • 0-5 volt analog input. Voltage data is viewable on all models of the LCD display.
    • Software support for the display of Zeitronix pressure sensors.
    • Customized data conversions can be entered to match 0-5 volt sensor specifications.
    • All converted User1 data values are displayed only in the software.
  • User2 Input:
    • 0-5 volt analog input OR configurable to be used with Fuel/Oil/Boost pressure sensors and Air/Water/Oil/Transmission temperature sensors.
    • Data is displayed on the 2010 Model LCD and ZR-2 Multi-gauge as a pressure or temperature.
    • Zeitronix Data Logger software will display and log data according to sensor type.
    • Customized data conversions can be entered to match 0-5 volt sensor specifications.
    • Customized data conversion values are displayed in the Zeitronix Data Logger software only.
  • Warning Output for use with ZAVT-1 warning/trigger box
  • 5V output for sensors

SEMA Award Winning Zeitronix ZR-1 3-Digit Wideband Air/Fuel and Lambda Gauge
The Gauge works with all versions of the Zeitronix Zt-2 Wideband AFR meter and Datalogging Systems  and Zt-3 Wideband AFR Meter. The ZR-1 plugs into the Zt-2 or Zt-3 DATA port and can be used while datalogging.

Clean and easy plug and play installation: power and display information is provided using one wire connecting to the Zt-2 or Zt-3 DATA port. The ZR-1 cable length is 5 ft (1.5m) and can be extended if needed.

ZR-1 Features

  • Stylish, machined, brushed aluminum or anodized black bezel and slim enclosure
  • High contrast LED display
  • Large 0.4" (10mm) digits - available in Blue or Red
  • Slim design for flexible gauge mounting options
  • Programmable to startup as an AFR or Lambda gauge
  • Peak and Hold feature

Applications

  • Universal

Zt-2 Specifications

  • 0.1 AFR accuracy
  • Operating voltage 10V to 18V
  • Switching power supply for oxygen sensor heater
  • Precise sensor temperature control
  • Reverse polarity protection
  • Integrated self-resetting fuse
  • Positive lock connectors
  • Protected inputs and outputs
  • Flexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connector
  • Wideband Oxygen Sensor included
  • Easy to install plug and play kit
  • Adjustable Narrowband Switching Point
  • Warning Alarms and Triggers

ZR-1 Specifications

  • Base diameter: 2 1/16" (52mm)
  • Bezel diameter: 2 1/2" (62mm)
  • Thickness: 0.75" (19mm)
  • Digit height: 0.4" (10mm)

What's In The Box?

  • Zt-2 Wideband Controller
  • ZR-1 Wideband LCD Display
  • Bosch 5 wire Wideband Oxygen Sensor
  • Oxygen Sensor Harness (10 feet length)
  • Signal Harness
  • Serial datalogging cable with RJ-12 to DB-9 converting plug
  • Zeitronix Data Logger software
  • Instructions
  • 2 pin connector for the EGT input

Warranty

  • Manufacturer Standard Warranty

Downloads

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)