Mishimoto Baffled Oil Catch Can - PCV Side | 2014-2019 Ford Fiesta ST (MMBCC-FIST-14PBE)

Ford Fiesta ST Baffled Oil Catch Can (PCV Side) by Mishimoto

The Mishimoto Ford Fiesta ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Thousands of test miles were logged on our Fiesta ST to determine what can setup would work the best. Mishimoto engineers found that placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving.

The Mishimoto Ford Fiesta ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit pre-molded hoses with factory quick-disconnect fittings already installed. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two CNC-machined aluminum, ½” barb fittings connect the hoses to the can.

Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.

Features

• Mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter
• Patented billet 6061 aluminum can sealed with Viton™ O-rings
• Robust, application-specific bracket mounts the can in a serviceable location
• Includes pre-molded hoses with factory quick-disconnect fittings for simplified installation
• CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
• Catch can has a 3 oz. capacity for longer servicing intervals
• Internal air diverter increases air turbulence to improve oil separation
• Filter and can are fully serviceable

Benefits

• Helps reduce carbon buildup on intake valves
• Helps maintain proper octane levels to reduce potential detonation
• Installs in under 30 minutes

Please Note: After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

Applications

• 2014 - 2019 Ford Fiesta ST

What's In The Box?

• 1 - Compact Baffled Oil Catch Can
• 1 - Application Specific Mounting Bracket
• 2 - Direct fit Hoses with Pre-Installed Factory Quick-Disconnect Fittings
• 2 - CNC-machined Barbed Fittings
• 2 - Worm-Gear Clamps
• Mounting Hardware

References

• Installation Instructions

Warranty

• Mishimoto Limited Lifetime Warranty