• Air Intake
    & Exhausts
  • Drivetrain Components
  • Electronic Components
  • Engine
    & Cooling
  • Exterior
    & Lighting
  • Forced Induction
  • Fuel System
    & Additives
  • Suspension
    & Brakes
  • Do It Yourself &
    Fabrication
  • Other Accessories
  • Zeitronix Zt-2 and ZR-2 Wideband / Boost / EGT Gauge Package - Modern Automotive Performance
  • Zeitronix Zt-2 and ZR-2 Wideband / Boost / EGT Gauge Package - Modern Automotive Performance

    Zeitronix Zt-2 and ZR-2 Wideband / Boost / EGT Gauge Package

    PART#
    No reviews

    $ 399.00

    Free Shipping

    MAP Loyalty Program: Earn $ 7.98 Toward Next Purchase!
    Zeitronix Zt-2 and ZR-2 Wideband / Boost / EGT Gauge Package - Modern Automotive Performance

    The ZR-2 Multi Gauge:
    • One gauge for Wideband AFR, Lambda, Boost, Vacuum and EGT
    • 16 gauge combinations
    • 4 digits
    • Stylish, machined, brushed finish aluminum bezel and slim enclosure gives the gauge an elegant appearance
    • User programmable outer LED and inner numeric display values via a front push button
    • English and Metric Units
    • High contrast LED display
    • Large 0.3" (7.5mm) digits
    • Slim, flat back, design for flexible gauge mounting options
    • Peak and Hold feature

    The Multi Gauge works with all versions of the Zeitronix Zt-2 Wideband AFR meter and Datalogging System. The ZR-2 plugs into the Zt-2 DATA port. For clean and easy plug and play installation, power and serial data is supplied from the Zt-2 DATA port. There are no additional +12V or ground wires. The ZR-2 cable length is 5 ft (1.5m)

    Mounting Options:
    The ZR-2 gauge is only 3/4" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The ZR-2 base allows the gauge to be mounted in a standard 2” 1/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts.

    ZR-2 gauge dimensions:
    • Base diameter 2" 1/16 (52mm)
    • Bezel diameter 2" 1/2 (62mm)
    • Thickness 0.75" (19mm)
    • Digit height 0.3" (7.5mm)

    Zt-2 Specs:
    • 0.1 AFR accuracy
    • Operating voltage 10V to 18V
    • Switching power supply for oxygen sensor heater
    • Precise sensor temperature control
    • Reverse polarity protection
    • Integrated fuse
    • Flexible Plug and Play Sensor Harness with a small connector which is easy to route through the firewall
    • Wideband Oxygen Sensor included
    • Easy to install plug and play kit
    • Adjustable Narrowband Switching Point
    • Warning Alarms and Triggers

    Inputs/Outputs:
    • Bosch Wideband O2 sensor
    • Linear Wideband Output AFR=Vx2+9.6
    • Nonlinear Wideband Output
    • Serial data output to the Zeitronix Wideband LCD Display
    • Serial data output for real time datalogging (PC laptop required)
    • RPM Input ( tachometer or primary side ignition coil input)
      *The RPM input works in any car and any ignition system. No additional adapters needed!
    • Simulated Narrowband Output to feed a stock ECU
    • Throttle Position Input
    • Boost Sensor Input
    • EGT Probe Input
    • User Input/Warning Output

    Be sure to add a MAP sensor if you would like to display boost or an EGT Probe+ Extension Harness if you would like to display EGT and you do not have an existing EGT sensor.

    Important Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.

    SEARCH OUR STORE