Mishimoto Baffled Oil Catch Can, PCV Side | 2015+ Ford Mustang EcoBoost (MMBCC-MUS4-15P)
You save % ()
2015 Ford Mustang EcoBoost Baffled Oil Catch Can
Thousands of test miles were logged on our Mustang EcoBoost to determine what can setup would work the best. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield nearly no accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Mustang EcoBoost’s on the road.
The Mishimoto Mustang EcoBoost catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit silicone hoses with pre-assembled quick-disconnect fittings available in either black, blue, or red to suit your taste. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two plastic, ½” barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!
- Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter
- Application-specific bracket mounts the can in a serviceable location
- Silicone hoses include pre-attached stock-style connections for plug & play install
- Billet 6061 aluminum sealed can
- Defends intercooler, intake system, and essential components from oil blow-by
- Helps maintain proper octane levels to reduce potential detonation
- Filters and can is fully serviceable
- Internal air diverter turbulates air longer to improve oil separation
- Offered with black, blue, or red silicone hoses
- Mishimoto Lifetime Warranty
- (1) Application-Specific Mounting Bracket
- (1) Black, Anodized 6061 Aluminum Catch Can
- (2) Direct-Fit Silicone Hoses with Quick-Disconnect Fittings
- (2) Plastic Barbed Fittings
- (2) Worm-Gear Clamps
- (1) Air Diverter
- (1) Internal Baffle & Rod
- (1) 3/8” NPT Plug
- (1) Large O-Ring
- Mounting Hardware
- Mishimoto Lifetime Warranty
First 1000 miles and already had proof it's worth the money. Installation wasn't too bad either.
Delivery was fast, parts were packed very good, everything included to install this. Used youtube installation videos finishing installation was done in about 1 hour. Fits and looks great, I chose the red hoses look good.
Delivery was fast, parts were packed very good, everything included to install this item except a instruction sheet. That was ok because youtube has plenty of installation videos. Hose clips were very difficult to remove...without a lift the clip on motorblock was very time consuming but after these were opened and original PIC hose removed the finishing installation was done in about 20 mins. Fits and looks great, I chose the black hoses for the OEM look. Again I only have praise for MAPermance parts. Thanks.