MAP Intercooler and Piping Upgrade Kit | 2015+ Ford Mustang Ecoboost (EBM-ICK)
All MAPerformance fabricated products are hand made in house by very skilled fabricators. We bend our own tubing, machine our own flanges, design jigs, weld, port, and R&D right here in the USA with locally sourced raw material. All fabricated products carry a lifetime guarantee against cracking/warping/failing. So buy with confidence, know that you are getting the best product on the market for your vehicle!
The MAP Ecoboost Mustang intercooler is a fabricated piece of art. We created this art by deciding to set ourselves apart from all the other intercoolers on the market and go with CNC billet machined end tanks. Not only does it allow us to achieve ultimate air flow by having smooth internal contouring, but we were also able to incorporate all the necessary sensor flanges, and mounting brackets into the one piece endtanks. No need to bend up a boxy end tank, and weld on cut to fit brackets and machined flanges. On top of it all, it just looks plain bad-ass! So, how does it perform? See for yourself!
Original charge air temps with the stock intercooler would run all the way up to 130-140 degrees on a 4th gear run. With our FMIC installed it never broke 100 degree's during testing, average was 95-96 degrees with back to back pulls. Below is a graph of a 4th gear run during a long day of testing on our dyno. As demonstrate below, our intercooler efficiently and effectively lowered air intake temperatures throughout the pull.
The MAP Charge Pipe Upgrade Kit was designed to replace the factory plastic intercooler pipes. Not only do the units look terrible, but they also have been known to pop off due to the factory couplers having a slippery texture paired with weak worm-drive clamps. Our kit includes high quality Squirrelly Performance 4-ply couplers with Stainless T-bolt clamps to prevent any intercooler popping. This will also eliminate your factory BPV which can be quite annoying if you have an aftermarket intake system as it opens and closes rapidly under part throttle acceleration. The new Turbosmart Smart Port SuperSonics are very reactive and have performed well during our testing, not to mention they sound great too!
- 6061 Billet Endtanks
- 20x6x5 Core
- 766CFM @ 1psi Pressure Drop | 980CFM @ 1.5psi Pressure Drop
- Supports up to 550whp
- 100% Direct replacement (Works with stock piping)
- Doesn't require removal of front bumper
- Doesn't require delete of AGS (Active Grill Shutters)
- Made in the USA
- Warranty: Lifetime to Original Purchaser
Charge Pipe Features:
- Mandrel Bent 304SS USA-Made Stainless Steel Tube
- Fully Tig welded and backpurged
- Eliminates the factory BOV
- Stainless T-bolt Clamps
- Squirrelly Performance 4-ply Couplers
- Available in Raw Stainless or Wrinkle Black (custom colors available for small fee)
- Features bracket to mount the wire harness just like factory
- 100% Made in the USA
- Warranty: Lifetime to Original Purchaser
- 2015+ Ford Mustang Ecoboost
What's in the Box?
- 1 Intercooler
- Charge Piping Upgrade
- Turbosmart Supersonic
- Necessary Couplers and Clamps
- Harness for users without a Cobb Accessport
- Plug for VTA or 25mm Plumb back fitting for VTA
- This kit includes a vacuum line and t-fitting
- Please Note: Additional Lines and Hardware come with BOV but will not be used!
- MAP Lifetime Warranty On Fabricated Parts
Kit is made with perfection in mind, every thing was welded beautifully and looks amazingly amazing. Fitment was on point easy install even with out a lift. The install video helped alot. One thing i would have liked to see is that the video dont get into much detail about the vaccum sorce for the bov and adjusting the bov, but a over all 5 star review.
As for performance i have this paired with MA's cai down pipe muffler delete, MA's recommended spark plugs and the cobb v3 also from MA with the ots stage 3 tune and my car is a totally new ecobeast for sure. MA's customer service is 5 star also. The Ma rewards program is the icing on the cake ta top off a extremely well built parts and 5 star customer service. Thanks again guys im a MA performance customer for life.
This intercooler is Aluminium art work! Very nice high quality piece. The kit itself was very easy to put in. All I did was follow the instructions on the video. It took a couple of hours but I went slow to make sure everything went back together perfectly. I had no issues installing the kit and the new plumbing under the hood along with the MAP air intake system looks great! I would buy this again. No regrets. Do yourself a favor and get one. Highly recommended.
Overall excellent kit! The kit was easy to install thanks to the videos map uploaded. The intercooler is very impressive and great fabrication! The description and reviews do not disappoint. The piping was nicely painted as well and nicely packed to avoid damage. Everything was packed with foam paper to avoid scratches and damage. Customer service was quick to response to my questions and kept me updated with the process and any questions I had! Very impressed with the whole experience and awesome products!!!
I ordered this over the phone and the salesman was very knowledgeable and helpful with the questions I had. He said the turn around time would be 4-6 weeks because the don't make them until they are ordered, but it was at my door in less than 3 weeks. Installation was super easy. I also order the COBB access port. The two together made significant changes in the car. It pulls harder through the entire gear. I am definately ordering through them again.