Fast, Free Shipping W/ Insurance On Orders Over $199
Mon-Fri 6am - 6pm
+1-888-627-3736 Speak To An Expert
Choose Your Car 
  • Cluth Masters FX725 Twin Disc Street/Race Clutch Kit | 2017-2018 Honda Civic 1.5T/Si (08150-TD7S-A)
  • Cluth Masters FX725 Twin Disc Street/Race Clutch Kit | 2017-2018 Honda Civic 1.5T/Si (08150-TD7S-A)
  • Cluth Masters FX725 Twin Disc Street/Race Clutch Kit | 2017-2018 Honda Civic 1.5T/Si (08150-TD7S-A)

    MAP price match guarantee Unbeatable Price Guarantee
    no codes, no bs, just parts

    Clutch Masters

    Cluth Masters FX725 Twin Disc Street/Race Clutch Kit | 2017-2018 Honda Civic 1.5T/Si

    PART# CLU 08150-TD7S-A
    We Price Match!

    Contact us to ensure you're getting the right part for your car at the absolute best pricing on earth!

    Email - sales@maperformance.com
    Phone 1(888)627-3736



    $ 1,349.99   $ 1,500.00
    You Save 10% ($ 150.01)

    Built To Order Free delivery by , to your door when ordered within hrs and mins
    Fits Your
    MAP Loyalty: Earn $ 27.00 Toward Next Purchase!

    2017-2018 Honda Civic 1.5T/Si Twin Disc Street/Race Clutch Kit by Clutch Masters

    The Clutch Masters FX725 is a 7.25" (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track.

    The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003" of flex where as a cast or stamped unit can see as much as .030" of flex.

    By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn't wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.

    Flywheels are made for each specific application in either aluminum or steel. Our aluminum flywheels are machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Aluminum flywheels are Type 3 hard coat anodized to ensure their durability and performance lasts. Each aluminum flywheel includes a replaceable insert. Steel flywheels are machined from 1045 billet cores and are then black oxide treated for rust prevention.

    Features

    • One ceramic rigid disc and one fiber tuff rigid disc developed from decades of experience
    • Designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track
    • The cover assembly is machined from billet aluminum and is then Type 3 hard anodized
    • Cover sees only .003" of flex where as a cast or stamped unit can see as much as .030" of flex
    • Flywheel is machined from billet 6061-T6 aluminum and Type 3 hard coat anodized
    • Meets SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA
    • Most have experienced better 4/10's times and averaged hundreds of passes without complications or repair
    • This kit is designed for racing but can handle occasional street use

    Please Note: Because of the minimal rotational mass the FX725 isn't ideal for the street, but with improvements in friction material over the years, Clutch Masters has created this solution that can handle occasional street driving.

    Applications

    • 2017 - 2018 Honda Civic 1.5T
    • 2017 - 2018 Honda Civic Si

    Benefits

    • Greatly Increased Horsepower and Torque Holding Capacity
    • Superior Clamping Force
    • Eliminates Flex in the Cover

    What's In The Box?

    • 1 - Cover Assembly w/ Diaphragm
    • 1 - Pressure Plate Ring
    • 1 - Rigid Ceramic Disc
    • 1 - Rigid Fiber Tuff Disc
    • 1 - Mid Plate
    • 1 - Aluminum Flywheel
    • 1 - Release Bearing
    • 1 - Alignment Tool
    • Pressure Plate Bolts

    Warranty

    • Manufacturer Standard Warranty

    2017-2018 Honda Civic 1.5T/Si Twin Disc Street/Race Clutch Kit by Clutch Masters

    The Clutch Masters FX725 is a 7.25" (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track.

    The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003" of flex where as a cast or stamped unit can see as much as .030" of flex.

    By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn't wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.

    Flywheels are made for each specific application in either aluminum or steel. Our aluminum flywheels are machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Aluminum flywheels are Type 3 hard coat anodized to ensure their durability and performance lasts. Each aluminum flywheel includes a replaceable insert. Steel flywheels are machined from 1045 billet cores and are then black oxide treated for rust prevention.

    Features

    • One ceramic rigid disc and one fiber tuff rigid disc developed from decades of experience
    • Designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track
    • The cover assembly is machined from billet aluminum and is then Type 3 hard anodized
    • Cover sees only .003" of flex where as a cast or stamped unit can see as much as .030" of flex
    • Flywheel is machined from billet 6061-T6 aluminum and Type 3 hard coat anodized
    • Meets SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA
    • Most have experienced better 4/10's times and averaged hundreds of passes without complications or repair
    • This kit is designed for racing but can handle occasional street use

    Please Note: Because of the minimal rotational mass the FX725 isn't ideal for the street, but with improvements in friction material over the years, Clutch Masters has created this solution that can handle occasional street driving.

    Applications

    • 2017 - 2018 Honda Civic 1.5T
    • 2017 - 2018 Honda Civic Si

    Benefits

    • Greatly Increased Horsepower and Torque Holding Capacity
    • Superior Clamping Force
    • Eliminates Flex in the Cover

    What's In The Box?

    • 1 - Cover Assembly w/ Diaphragm
    • 1 - Pressure Plate Ring
    • 1 - Rigid Ceramic Disc
    • 1 - Rigid Fiber Tuff Disc
    • 1 - Mid Plate
    • 1 - Aluminum Flywheel
    • 1 - Release Bearing
    • 1 - Alignment Tool
    • Pressure Plate Bolts

    Warranty

    • Manufacturer Standard Warranty

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    MAP Limited Lifetime Warranty

    1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship.

    2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review.

    3.) You must create a support ticket to acquire your return authorization number prior to returning the product.

    4.) Warranty claims will not be honored if the product was not purchased through an approved dealer.

    For warranty evaluation please create a support ticket via this form here.

    We use cookies to offer a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Please review our privacy policy & cookies information page.  If you continue you consent to our privacy policy & use of cookies.Accept

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia or the UK. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within your country. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within California. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.