{"title":"MAP-Sensor","description":"","products":[{"product_id":"omnipower-4-bar-map-sensor-dsm-evo-evo-x","title":"Omni Power MAP Sensor | 1992-2015 Mitsubishi Evo, 1991-1992 Mitsubishi Galant VR-4, and 1991-1999 Mitsubishi 3000GT (MAP-MITS)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e1992-2015 Mitsubishi Evo, 1991-1992 Mitsubishi Galant VR-4, and 1991-1999 Mitsubishi 3000GT 4 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 2.5, 3 and 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003cbr\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003eCompetitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cbr\u003eOmni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003cli\u003eAvailable in 3, 4 and 5 Bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1992-2015 Mitsubishi Lancer Evolution\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e1989-1999 Mitsubishi \u003c\/span\u003eEclipse \/ Eagle Talon \/ Plymouth Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e1991-1992 Mitsubishi \u003c\/span\u003eGalant VR-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e1991-1999 Mitsubishi \u003c\/span\u003e3000GT \/ Dodge Stealth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"3 BAR","offer_id":43564022467,"sku":"OMN MAP-MITS-3bar","price":119.99,"currency_code":"USD","in_stock":true},{"title":"4 BAR","offer_id":43564022531,"sku":"MAP-MITS-4BAR-OMNIP","price":124.99,"currency_code":"USD","in_stock":true},{"title":"5 BAR","offer_id":12428841713734,"sku":"OMN MAP-MITS-5br","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-28375113203782.jpg?v=1631191002"},{"product_id":"omni-power-4-bar-map-sensor-2009-nissan-gt-r-map-gtr-4br","title":"Omni Power 4 Bar MAP \u0026 T-MAP Sensors | 2009+ Nissan GT-R (MAP-GTR-4BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eNissan R35 GTR 4 Bar MAP\/T-MAP Sensors by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. This is a 4 pin map sensor which has a built in temperature sensor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOmni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds the fastest response time of any MAP sensor on the market.\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Requires Tuning\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2009+ Nissan GT-R (R35)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Omni Power MAP\/T-MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"MAP Sensor","offer_id":5329909891,"sku":"OMN MAP-GTR-4BR","price":124.99,"currency_code":"USD","in_stock":true},{"title":"T-MAP Sensor (Temperature Function)","offer_id":12107124768838,"sku":"OMN MAP-GTRT-4BR","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-gtr-4br-map-sensor-28322886385734.png?v=1628775406"},{"product_id":"map-sensor-adapter-mitsubishi-evolution-8-9-2003-2006-by-torque-solution","title":"Torque Solution MAP Sensor Adapter | 2003-2006 Mitsubishi Evo 8\/9 (TS-EV-011)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eTorque Solution Map Sensor Adapter : Mitsubishi Evolution 8\/9 2003-2006\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eTorque Solution Evo map sensor adapter allows you to install your OEM Evo Map Sensor onto a manifold that does not have OEM MAP provisions. One side is threaded in 1\/4 NPT for a hose barb and the map sensor bolts directly to the back side.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6061 Billet Aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSimple Installation of OEM MAP Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThreaded Hose Barb Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2006 Mitsubishi Evo 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMAP Sensor Adapter\u003c\/li\u003e\n\u003cli\u003eThreaded Hose Barb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":5331047747,"sku":"TOR TS-EV-011","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/torque-solution-tor-ts-ev-011-11985976623174.jpg?v=1628680717"},{"product_id":"map-sensor-adapter-mitsubishi-eclipse-talon-2g-95-99-by-torque-solution","title":"Torque Solution MAP Sensor Adapter | 1995-1999 Mitsubishi Eclipse\/Eagle Talon (TS-2G-006)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e1995-1999 Mitsubishi Eclipse\/Eagle Talon MAP Sensor Adapter by Torque Solution\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eTorque Solution 2g DSM map sensor adapter allows you to install your OEM 2G Map Sensor onto a manifold that does not have OEM MAP provisions. One side is threaded in 1\/4 NPT for a hose barb and the map sensor bolts directly to the backside.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eSimple Installation of OEM MAP Sensor\u003c\/li\u003e\n\u003cli\u003eThreaded Hose Barn Included\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1995-1999 Mitsubishi Eclipse\/Eagle Talon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTorque Solution offers a limited lifetime warranty on this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":5331048707,"sku":"TOR TS-2G-006","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/torque-solution-tor-ts-2g-006-11985976950854.jpg?v=1627417878"},{"product_id":"k27-map-sensor-pressure-reduction-fitting","title":"K27 MAP Sensor Pressure Reduction Fitting","description":"\u003cp\u003eFits any Denso map sensor equipped model. Tricks the ECU into believing there is less manifold pressure or boost than there really is by approximately 15%, allowing some ECU limits to be exceeded, including boost limit on SST equipped EVO X's. Allows MAP sensor to see pressure changes above its normal range, allowing for control without actually installing a higher bar MAP sensor, or recalibrating the MAP sensor.\u003c\/p\u003e\n\u003ceol\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: \u003c\/strong\u003eThe installation of this part \u003cstrong\u003eWILL REQUIRE A RETUNE TO PREVENT ENGINE DAMAGE.\u003c\/strong\u003e This is due to the reduction of calculated load, without a corresponding reduction in actual load. The net effect without a retune will be increased timing, and reduced fuel.\u003c\/p\u003e\n\u003ceol\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.maperformance.com\/products\/files\/BoostClampInstructionsV3.pdf\"\u003eDownload updated instructions here\u003c\/a\u003e (PDF link)\u003c\/p\u003e\n\u003ceol\u003e\n\u003cp\u003eImportant Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.\u003c\/p\u003e\n\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"K27","offers":[{"title":"Default Title","offer_id":5331821315,"sku":"K27-MAP-SPRF","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/k27-k27-map-sprf-3768936195.jpg?v=1563756143"},{"product_id":"jm-fab-map-sensor-adapter-2g-dsm","title":"JM Fab MAP Sensor Adapter | 2G DSMMultiple Fitments (2G-MAPADAPT-00)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2G DSM MAP Sensor Adapter\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis external MAP sensor adapter allows you to install a 2G\/EVO OEM MAP sensor when using an aftermarket intake manifold that doesn't allow for an OEM sensor. The MAP sensor is bolted to the back side, a vacuum line is then ran from the hose barbed side and tee'd into a pressurized source on your current intake manifold.(Vacuum hose and \"T\" fitting NOT included).\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAdapter is light weight and can hang loosely or be tied up anywhere in the engine bay. CNC machined from 6061 aluminum. Included is a 1\/4\" NPT 1\/4\" ID hose barb fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2G DSM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Sensor Adapter\u003c\/li\u003e\n\u003cli\u003e1 NPT Barbed Fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJM Fab Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"JM Fabrications","offers":[{"title":"Default Title","offer_id":5331946947,"sku":"JMF 2G-MAPADAPT-00","price":31.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/jm-fabrications-jmf-2g-mapadapt-00-3768991747.jpg?v=1564406966"},{"product_id":"5-bar-75-psia-map-sensor-stainless-steel-kit-turbo-supercharger-by-aem-electronics","title":"AEM Electronics 5 Bar 75 PSIA MAP Sensor Stainless Steel Kit (30-2130-75)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e75PSIa \/ 5 BAR MAP Pressure Sensor by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003ePSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless-steel sensors accurate to within 1% of full scale (pressure sensors)\u003c\/li\u003e\n\u003cli\u003eHigh-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)\u003c\/li\u003e\n\u003cli\u003eConnector and pins included\u003c\/li\u003e\n\u003cli\u003eAccuracy: +\/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity\u003c\/li\u003e\n\u003cli\u003eOperating Temp: -40C to 105C \/ -40F to 221F\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: 500PSI\u003c\/li\u003e\n\u003cli\u003eResponse Time: \u0026lt; 1ms\u003c\/li\u003e\n\u003cli\u003eVibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes\u003c\/li\u003e\n\u003cli\u003eSensor Body: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eWetted Materials: 304L \u0026amp; 316L Stainless Steel\u003c\/li\u003e\n\u003cli\u003eThread: 1\/8\" NPT Male Thread\u003c\/li\u003e\n\u003cli\u003eWeight: \u0026lt; 85 Grams\u003c\/li\u003e\n\u003cli\u003eOutput: .5 to 4.5Vdc Linear\u003c\/li\u003e\n\u003cli\u003eElec. Termination: Integral weatherproof connector, includes mating connector, pins \u0026amp; pin lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e75 PSIa or 5 Bar Stainless Sensor\u003c\/li\u003e\n\u003cli\u003eConnector\u003c\/li\u003e\n\u003cli\u003ePins\u003c\/li\u003e\n\u003cli\u003ePin Lock\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT to -4 Adapter\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT to 3\/16\" Barb Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemelectronics.com\/files\/instructions\/30-2130-XX-Pressure-Sensors-Instructions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/files\/instructions\/30-2130-75%20Sensor%20Data.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSensor Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5389014851,"sku":"AEM 30-2130-75","price":184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-2130-75-12022479093830.png?v=1753466855"},{"product_id":"aem-3-5-bar-50-psia-map-sensor-kit-30-2130-50","title":"AEM 3.5 BAR \/ 50 PSIA MAP Sensor Kit (30-2130-50)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eAEM Stainless Steel MAP\/PSIa Sensor 50PSI\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eAEM offers high quality stainless steel PSIa sensors in 15 (1BAR), 30 (2BAR), 50 (3.5BAR), 75 (5BAR) and 100 (7BAR). PSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eUse a SS Pressure Sensor where you need exact details of the pressure. Example: MAP Sensor information for the ECU – Calibration\/crucial information for the ECU.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccuracy: +\/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity\u003c\/li\u003e\n\u003cli\u003eOperating Temp: -40C to 105C \/ -40F to 221F\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: 300PSI\u003c\/li\u003e\n\u003cli\u003eResponse Time: \u0026lt; 1ms\u003c\/li\u003e\n\u003cli\u003eVibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes\u003c\/li\u003e\n\u003cli\u003eSensor Body: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eWetted Materials: 304L \u0026amp; 316L Stainless Steel\u003c\/li\u003e\n\u003cli\u003eThread: 1\/8\" NPT Male Thread\u003c\/li\u003e\n\u003cli\u003eWeight: \u0026lt; 85 Grams\u003c\/li\u003e\n\u003cli\u003eSupply Current: Output: .5 to 4.5Vdc Linear\u003c\/li\u003e\n\u003cli\u003eElec. Termination: Integral weatherproof connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless-steel sensors accurate to within 1% of full scale (pressure sensors)\u003c\/li\u003e\n\u003cli\u003eHigh-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) MAP Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eMating connector\u003c\/li\u003e\n\u003cli\u003ePins \u0026amp; pin lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemelectronics.com\/files\/instructions\/30-2130-XX-Pressure-Sensors-Instructions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemelectronics.com\/files\/instructions\/30-2130-50%20Sensor%20Data.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSensor Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5389202755,"sku":"AEM 30-2130-50","price":177.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-2130-50-12787111592006.png?v=1753466854"},{"product_id":"2011-2012-porsche-911-997-2-turbo-turbo-s-3-bar-map-sensor-by-cobb-tuning-800300","title":"Cobb Tuning 3-Bar Map Sensor | 2010-2012 Porsche 911 Turbo\/Turbo S (800300)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2010-2012 Porsche 911 Turbo\/Turbo S 3-Bar Map Sensor\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB Porsche 3-Bar MAP Sensor Kit it a direct replacement and allows you to read boost beyond what the factory sensors can measure. With the factory sensors limited to around 22 psi, the COBB 3-Bar MAP Sensor Kit will allow accurate measuring up to 30psi.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Porsche 3-Bar MAP Sensor Kit allows you to read boost beyond what the factory sensors can measure. With the factory sensors limited to around 22 psi, the COBB 3-Bar MAP Sensor Kit will allow accurate measuring up to 30psi.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstucted from High-Quality Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for Accurate Measuring up to 30PSI \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2010-2012 Porsche 911 Turbo\/Turbo S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 3-Bar Map Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCobb Tuning's Standard Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13397714435,"sku":"COB 800300","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-800300-12001970847814.png?v=1755755031"},{"product_id":"10-34-bar-150-psi-stainless-steel-map-sensor-kit-1-8-npt-male-by-aem-electronics","title":"AEM Electronics Stainless Steel MAP Sensor Kit 10.34 BAR 150 PSI 1\/8 NPT Male (30-2130-150)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eAEM Stainless Steel MAP\/PSIa Sensor 150PSI\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eAEM offers high quality PSIg sensors in 100, 150, 500, 1,000, and 2,000. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig. Gauge style pressure sensors are commonly used for oil pressure, fuel pressure, brake pressure, nitrous pressure etc.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eUse a SS Pressure Sensor where you need exact details of the pressure. Example: MAP Sensor information for the ECU – Calibration\/crucial information for the ECU.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccuracy: +\/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity\u003c\/li\u003e\n\u003cli\u003eOperating Temp: -40C to 105C \/ -40F to 221F\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: 1500PSI\u003c\/li\u003e\n\u003cli\u003eResponse Time: \u0026lt; 1ms\u003c\/li\u003e\n\u003cli\u003eVibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes\u003c\/li\u003e\n\u003cli\u003eSensor Body: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eWetted Materials: 304L \u0026amp; 316L Stainless Steel\u003c\/li\u003e\n\u003cli\u003eThread: 1\/8\" NPT Male Thread\u003c\/li\u003e\n\u003cli\u003eWeight: \u0026lt; 85 Grams\u003c\/li\u003e\n\u003cli\u003eSupply Current:\u003c\/li\u003e\n\u003cli\u003eOutput: .5 to 4.5Vdc Linear\u003c\/li\u003e\n\u003cli\u003eElec. Termination: Integral weatherproof connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless-steel sensors accurate to within 1% of full scale (pressure sensors)\u003c\/li\u003e\n\u003cli\u003eHigh-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e150 PSIg Stainless Sensor\u003c\/li\u003e\n\u003cli\u003eConnector\u003c\/li\u003e\n\u003cli\u003ePins\u003c\/li\u003e\n\u003cli\u003ePin Lock\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT to -4 Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemelectronics.com\/files\/instructions\/30-2130-XXX%20Stainless%20Steel%20Pressure%20Sensor.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemelectronics.com\/files\/instructions\/30-2130-150%20Sensor%20Data.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSensor Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5394288643,"sku":"AEM 30-2130-150","price":184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-2130-150-12787143802950.jpg?v=1753466851"},{"product_id":"omni-power-gm-style-universal-4-bar-map-sensor-with-pigtail-map-u-4br","title":"Omni Power GM Style Universal 4 Bar Map Sensor with Pigtail (MAP-U-4BR)","description":"With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitor's sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. Omnipower 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drive ability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look. \u003ceol\u003e \u003ceol\u003eKey Features: \u003ceol\u003e \u003ceol\u003eUpgrades GM 3 Bar to allow up to 43.5 psi of boost \u003ceol\u003ePressure tested to over 130 psi without leaking \u003ceol\u003e-40 to 260 degrees Fahrenheit optimal temperature operating range \u003ceol\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market) which translates into improved boost response. \u003ceol\u003eAutomatic temperature compensation. \u003ceol\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels. \u003ceol\u003eCompatible with all aftermarket engine management systems. \u003ceol\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes. \u003ceol\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitor's turbo MAP sensors. \u003ceol\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping. \u003ceol\u003ePin Out is: A=Positive 5 Volt Source B= Negative\/Ground C= Signal to ECU \u003ceol\u003e \u003ceol\u003ePlease Note: As with any upgraded MAP sensor, you will need an engine management system in order to re-calibrate the ecu. If you are looking for a stock replacement sensor for a naturally aspirated stock vehicle, please contact us.\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":5480534083,"sku":"OMN MAP-U-4BR","price":111.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/omni-power-omn-map-u-4br-30201879953478.jpg?v=1687451075"},{"product_id":"aem-map-sensor-3-5-to-6-5-bar-or-150psig-30-2131","title":"AEM MAP Sensor - 3.5 to 6.5 Bar or 150PSIg (30-2131)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e3.5 to 6.5 Bar or 150PSIg Brass MAP Sensors By AEM\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAbsolute (PSIa) Brass Pressure Sensors\u003c\/strong\u003e\u003cbr\u003eAEM offer high quality brass PSIa sensors in 30(2BAR), 50 (3.5BAR) and 75 (5BAR). PSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required of you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Pressure Sensor is right for you?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Pressure Sensor = Ruler\u003c\/strong\u003e\u003cbr\u003eUse a Brass Pressure Sensor where you need a good reference to what pressure is being seen.\u003cbr\u003eExample: Brass Pressure Sensor used for a Boost Gauge Reference\/Information for knowing manifold pressure, not for ECU calibration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Pressure Sensor = Caliper\u003c\/strong\u003e\u003cbr\u003eUse a SS Pressure Sensor where you need exact details of the pressure.\u003cbr\u003eExample: MAP Sensor information for the ECU Calibration\/crucial information for the ECU. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrass sensors accurate to within 3% of full scale (pressure sensors)\u003c\/li\u003e\n\u003cli\u003eHigh-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)\u003c\/li\u003e\n\u003cli\u003eConnector and pins included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBrass Sensor, Connector \u0026amp; Pins\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eWarranty\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.aemelectronics.com\/about-us\/warranty-returns\" target=\"_blank\"\u003e\u003cspan\u003e12 Month Limited Warranty\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/aemelectronics.com\/files\/instructions\/30-2131-XXX%20Brass%20Pressure%20Sensor.pdf\" target=\"_blank\"\u003eInstall Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"3.5 BAR \/ 50 PSIa","offer_id":8696842051,"sku":"AEM 30-2131-50","price":92.95,"currency_code":"USD","in_stock":true},{"title":"5 BAR \/ 75 PSIa","offer_id":8696842115,"sku":"AEM 30-2131-75","price":92.95,"currency_code":"USD","in_stock":true},{"title":"6.5 BAR \/ 100 PSIa","offer_id":8696842179,"sku":"AEM 30-2131-100","price":92.95,"currency_code":"USD","in_stock":true},{"title":"150 PSIg","offer_id":42071841144902,"sku":"AEM 30-2131-150","price":92.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-11974776488006.jpg?v=1753466848"},{"product_id":"zeitronix-map-sensor","title":"Zeitronix Map Sensor","description":"MAP, Boost Sensor, 50 PSI (3.5 Bar) absolute pressure \u003ceol\u003e*This means vacuum and 35.3 PSI gauge at sea level. \u003ceol\u003e \u003ceol\u003eMAP, Boost Sensor, 75 PSI (5 Bar) absolute pressure \u003ceol\u003e*This means vacuum and 60 PSI gauge at sea level. \u003ceol\u003e \u003ceol\u003eMilitary grade sensor in stainless steel housing with unprecedented accuracy, also used in nuclear applications. \u003ceol\u003eNot being happy with available on the market MAP sensors we adopted this great sensor to be used as a MAP sensor for precise manifold vacuum and boost display and logging. Less expensive than most peak and hold boost gauges. Connecting harness and hose barb included. Made in the USA. \u003ceol\u003e \u003ceol\u003e*5 Bar only works with Zt-2s manufactured after Jun 20 2007. Use ZDL 2.0.10 to check compatibility.\n\u003cp\u003eImportant Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.\u003c\/p\u003e\n\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"Zeitronix","offers":[{"title":"3.5 Bar","offer_id":7526086659,"sku":"ZEI 3.5BARMAP","price":159.0,"currency_code":"USD","in_stock":true},{"title":"5 Bar","offer_id":8413028995,"sku":"ZEI 5BARMAP","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/zeitronix-5287443651.jpg?v=1564641581"},{"product_id":"oem-mitsubishi-3-bar-map-sensor-2008-2015-mitsubishi-evo-x-1865a052","title":"OEM Mitsubishi 3 Bar Map Sensor | 2008-2015 Mitsubishi Evo X (1865A052)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2008-2015 Mitsubishi Evo X OEM 3 Bar Map Sensor by Mitsubishi\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eSometimes OEM parts are perfect for your needs. Thankfully, Mitsubishi understands this and offers a large selection of OEM replacements for various models.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine OEM Part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 3-Bar MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMitsubishi offers a standard limited 12-month warranty on OEM parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"OEM Mitsubishi Parts","offers":[{"title":"Default Title","offer_id":21116294659,"sku":"MIT 1865A052","price":295.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/oem-mitsubishi-parts-mit-1865a052-12556616323.jpg?v=1564037621"},{"product_id":"omni-power-4-bar-map-sensor-mulitple-fitments-map-bdhf-4br","title":"Omni Power 4 Bar MAP Sensor | Mulitple Fitments (MAP-BDHF-4BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 2.5, 3, 4 \u0026amp; 7 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. Omni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1988-2000 Honda Civic\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1994-2002 Honda Accord\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1997-2001 Honda CRV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1993-1997 Honda Del Sol\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1995-2001 Honda Odyssey\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1992-2001 Honda Prelude\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2000-2005 Honda S2000\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1997-1999 Acura CL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2001-2003 Acura CL 01-03 V6 models (premium only)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1990-2001 Acura Integra 90-01 all models (1990-1993 models will require 94+ throttle body for correct mounting)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1999-2003 Acura TL\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":31755631683,"sku":"OMN MAP-BDHF-4BR","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-bdhf-4br-11999137792070.jpg?v=1744823341"},{"product_id":"omni-power-3-bar-map-sensor-mulitple-fitments-map-bdhf-3br","title":"Omni Power 3 Bar MAP Sensor | 1988-2000 Honda Civic, 2000-2005 Honda Civic, and 1994-2002 Honda Accord (MAP-BDHF-3BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e1988-2000 Honda Civic, 2000-2005 Honda Civic, and 1994-2002 Honda Accord 3 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 2.5, 3, 4 \u0026amp; 7 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. Omni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1988-2000 Honda Civic\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1994-2002 Honda Accord\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1997-2001 Honda CRV\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1993-1997 Honda Del Sol\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1995-2001 Honda Odyssey\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1992-2001 Honda Prelude\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2000-2005 Honda S2000\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1997-1999 Acura CL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2001-2003 Acura CL 01-03 V6 models (premium only)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1990-2001 Acura Integra 90-01 all models (1990-1993 models will require 94+ throttle body for correct mounting)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1999-2003 Acura TL\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":31755631747,"sku":"OMN MAP-BDHF-3BR","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-bdhf-3br-11999145099334.jpg?v=1744823340"},{"product_id":"omni-power-map-sensor-multiple-fitments-map-sup","title":"Omni Power MAP Sensor | Multiple Fitments (MAP-SUP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 3 \u0026amp; 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003cbr\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003cbr\u003eCompetitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.\u003cbr\u003eOmni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003cli\u003eAvailable in 3 and 4 bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1993-1998 Toyota Supra Turbo\u003c\/li\u003e\n\u003cli\u003e2005-2009 Subaru Legacy Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"3","offer_id":31756164355,"sku":"OMN MAP-SUP-3BR","price":119.99,"currency_code":"USD","in_stock":true},{"title":"4","offer_id":31756164419,"sku":"OMN MAP-SUP-4BR","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-sup-3br-3-11975059800134.jpg?v=1628729859"},{"product_id":"omni-power-k-series-2-5-bar-map-sensor-multiple-fitments-map-k","title":"Omni Power K-Series MAP Sensor | Multiple Honda Fitments (MAP-K)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eK-Series MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 2.5, 3, 4 \u0026amp; 7 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003cbr\u003e\u003cbr\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003cbr\u003e\u003cbr\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor driveability, and catastrophic engine damage.\u003cbr\u003e\u003cbr\u003eOmni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market)\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/li\u003e\n\u003cli\u003eAvailable in 2.5 and 3 sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002+ CR-V\u003c\/li\u003e\n\u003cli\u003e2002+ RSX\u003c\/li\u003e\n\u003cli\u003e2001+ EP-3\u003c\/li\u003e\n\u003cli\u003e2006+ Civic LS\u003c\/li\u003e\n\u003cli\u003e2004+ TSX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eK-Series MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"2.5 Bar","offer_id":31756164675,"sku":"OMN MAP-K-2.5BR","price":119.99,"currency_code":"USD","in_stock":true},{"title":"3 Bar","offer_id":31756164739,"sku":"OMN MAP-K-3BR","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-k-2-5br-2-5-bar-11974987710534.jpg?v=1628729498"},{"product_id":"omni-power-general-3-bar-map-sensor-map-u-3br","title":"Omni Power GM 3 Bar MAP Sensor (MAP-U-3BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eGM 3 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market)\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/li\u003e\n\u003cli\u003eCalibration is linear with 1.1 kPa at 0 volts and 315.5 kPa at 5 volt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accuracy over full scale range under all conditions including temperature, altitude, and humidity changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - GM 3 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1 - Pigtail connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":31756178755,"sku":"OMN MAP-U-3BR","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/omni-power-omn-map-u-3br-30201876414534.jpg?v=1687450895"},{"product_id":"omni-power-map-sensor-4-bar-2000-2005-honda-s2000-map-s2k-4br","title":"Omni Power MAP Sensor 4 Bar | 2006-2009 Honda S2000 (MAP-S2K-4BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMAP Sensor 4 Bar\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 2.5, 3, 4 \u0026amp; 7 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor driveability, and catastrophic engine damage. Omni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eAutomatic temperature compensation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eCompatible with all aftermarket engine management systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"mednormal\"\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006-2009 Honda S2000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 4 Bar MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":32044580675,"sku":"OMN MAP-S2K-4BR","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/omni-power-omn-map-s2k-4br-30201870450758.jpg?v=1687450898"},{"product_id":"omni-power-4-bar-map-sensor-2015-ford-mustang-ecoboost-map-mus-4br","title":"Omni Power 4 Bar MAP Sensor | 2015-2017 Ford Mustang Ecoboost (MAP-MUS-4BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eEcoboost 4 Bar T-MAP Sensor\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. Omni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi (7 bar 1-80+ psi,) while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlug and play\u003c\/li\u003e\n\u003cli\u003eBuilt in temperature sensor\u003c\/li\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003eThe fastest response time of any MAP sensor on the market\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems. Minimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015+ Ford Ecoboost Mustang 2.3L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 4 Bar MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMFGR. Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":33170835715,"sku":"OMN MAP-MUS-4BR","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/omni-power-omn-map-mus-4br-30201876152390.jpg?v=1687450892"},{"product_id":"torque-solution-map-sensor-adapter-multiple-fitments-ts-su-422","title":"Torque Solution MAP Sensor Adapter | Multiple Subaru Fitments (TS-SU-422)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSubaru MAP Sensor Adapter by Torque Solution (TS-SU-422)\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eTorque Solution Map Sensor Adapter allows you to easily switch the OEM sensor for a 1\/8\" NPT male threaded map sensor.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT Female thread\u003c\/li\u003e\n\u003cli\u003eZinc Install Hardware Included\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Protune required to run non-OEM map sensor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - 2021 Subaru WRX STI\u003c\/li\u003e\n\u003cli\u003e2004 - 2014 Subaru Impreza WRX STi\u003c\/li\u003e\n\u003cli\u003e2002 - 2007 Subaru Impreza WRX\u003c\/li\u003e\n\u003cli\u003e2004 - 2008 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":578612690947,"sku":"TOR TS-SU-422","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/torque-solution-tor-ts-su-422-28367371337798.jpg?v=1630823809"},{"product_id":"omni-power-universal-5-bar-map-sensor","title":"Omni Power Universal 5 Bar MAP Sensor (MAP-U-5BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eUniversal 5 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 5 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. With the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor driveability, and catastrophic engine damage.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOmni Power 5 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in a universal Style housing including plug and pigtails for an easy install.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Omni Power 5 Bar MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":12275599507526,"sku":"OMN MAP-U-5BR","price":116.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-u-5br-12008746188870.jpg?v=1628728594"},{"product_id":"omni-power-3-bar-map-sensor-2004-subaru-sti-map-sti15-3br","title":"Omni Power 3 Bar MAP Sensor | 2004-2021 Subaru STI (MAP-STI15-3BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSubaru STI 3 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOmni Power MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2021 Subaru STI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Omni Power 3 Bar MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":12415459786822,"sku":"OMN MAP-STI15-3BR","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/omni-power-omn-map-sti15-3br-30201866911814.jpg?v=1687450715"},{"product_id":"omni-power-4-bar-map-sensor-2004-subaru-sti-map-sti15-4br","title":"Omni Power 4 Bar MAP Sensor | 2004-2021 Subaru STI (MAP-STI15-4BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSubaru STI 4 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOmni Power MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2021 Subaru STI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Omni Power 4 Bar MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":12415472762950,"sku":"OMN MAP-STI15-4BR","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-sti15-4br-14594925789254.jpg?v=1629096704"},{"product_id":"omni-power-5-bar-map-sensor-2004-subaru-sti-map-sti15-5br","title":"Omni Power 5 Bar MAP Sensor | 2004-2021 Subaru STI (MAP-STI15-5BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSubaru STI 5 Bar MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOmni Power MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2021 Subaru STI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Omni Power 5 Bar MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":12415488655430,"sku":"OMN MAP-STI15-5BR","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/omni-power-omn-map-sti15-5br-30201864781894.jpg?v=1687450714"},{"product_id":"oem-map-sensor-mount-srt4-inta-01","title":"OEM MAP Sensor Mount (SRT4-INTA-01)","description":"","brand":"JM Fabrications","offers":[{"title":"Not Included","offer_id":16988463693894,"sku":"JMF SRT4-INTA-01-NOOEMMAPMOUNT","price":0.0,"currency_code":"USD","in_stock":true},{"title":"Included","offer_id":16995430006854,"sku":"JMF SRT4-INTA-01-INCLOEMMAPMOUNT","price":23.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/jm-fabrications-6362485653574.gif?v=1564773641"},{"product_id":"ecumaster-3-5-bar-map-sensor-whp35m","title":"ECUMaster 3.5 Bar Map Sensor (WHP35M)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e3.5 Bar MAP Sensor by ECUMaster\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eWHP 3.5 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to 35 PSI of boost pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an ISO9001 Certified facility. The latest developments in sensor technology are used to create an extremely compact sensor, easing installation in cramped engine bays and chassis.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll sensors are compensated for temperature over a broad range and accurately measure pressure within .5%. Sensor bodies are crafted from 304 Stainless Steel and feature CNC cut threads and wrench flats for reliable sealing and trouble-free installation. Each sensor is packaged with a Delphi connector kit, installation instructions, and a tube of thread sealing compound.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e304 Stainless Steel 3.5 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003eCNC Cut 1\/8 NPT Threads\u003c\/li\u003e\n\u003cli\u003eIncludes Delphi Connector Kit \u0026amp; Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 3.5 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1 - Delphi Connector Kit\u003c\/li\u003e\n\u003cli\u003e1 - Tube of Thread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eECUMaster Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ECUMaster","offers":[{"title":"Default Title","offer_id":20083782156358,"sku":"ECU WHP35M","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/ecumaster-ecu-whp35m-7465375137862.jpg?v=1562796926"},{"product_id":"ecumaster-4-bar-map-sensor-whp4m","title":"ECUMaster 4 Bar Map Sensor (WHP4M)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4 Bar MAP Sensor by ECUMaster\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eWHP 4 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to 35 PSI of boost pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an ISO9001 Certified facility. The latest developments in sensor technology are used to create an extremely compact sensor, easing installation in cramped engine bays and chassis.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll sensors are compensated for temperature over a broad range and accurately measure pressure within .5%. Sensor bodies are crafted from 304 Stainless Steel and feature CNC cut threads and wrench flats for reliable sealing and trouble-free installation. Each sensor is packaged with a Delphi connector kit, installation instructions, and a tube of thread sealing compound.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e304 Stainless Steel 4 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003eCNC Cut 1\/8 NPT Threads\u003c\/li\u003e\n\u003cli\u003eIncludes Delphi Connector Kit \u0026amp; Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 4 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1 - Delphi Connector Kit\u003c\/li\u003e\n\u003cli\u003e1 - Tube of Thread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eECUMaster Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ECUMaster","offers":[{"title":"Default Title","offer_id":20083782189126,"sku":"ECU WHP4M","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/ecumaster-ecu-whp4m-7465370878022.jpg?v=1562795307"},{"product_id":"ecumaster-5-bar-map-sensor-whp5m","title":"ECUMaster 5 Bar Map Sensor (WHP5M)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e5 Bar MAP Sensor by ECUMaster\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eWHP 5 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to 60 PSI of boost pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an ISO9001 Certified facility. The latest developments in sensor technology are used to create an extremely compact sensor, easing installation in cramped engine bays and chassis.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll sensors are compensated for temperature over a broad range and accurately measure pressure within .5%. Sensor bodies are crafted from 304 Stainless Steel and feature CNC cut threads and wrench flats for reliable sealing and trouble-free installation. Each sensor is packaged with a Delphi connector kit, installation instructions, and a tube of thread sealing compound.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e304 Stainless Steel 5 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003eCNC Cut 1\/8 NPT Threads\u003c\/li\u003e\n\u003cli\u003eIncludes Delphi Connector Kit \u0026amp; Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 5 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1 - Delphi Connector Kit\u003c\/li\u003e\n\u003cli\u003e1 - Tube of Thread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eECUMaster Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ECUMaster","offers":[{"title":"Default Title","offer_id":20083782221894,"sku":"ECU WHP5M","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/ecumaster-ecu-whp5m-7465370943558.jpg?v=1562795324"},{"product_id":"ecumaster-7-bar-map-sensor-whp7m","title":"ECUMaster 7 Bar Map Sensor (WHP7M)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e7 Bar MAP Sensor by ECUMaster\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eWHP 7 BAR MAP SENSORS are ideally suited for high boost MAP sensor applications, providing resolution up to 35 PSI of boost pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWHP pressure sensors are the perfect companion to any ECU. WHP sensors are built to custom specifications in an ISO9001 Certified facility. The latest developments in sensor technology are used to create an extremely compact sensor, easing installation in cramped engine bays and chassis.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll sensors are compensated for temperature over a broad range and accurately measure pressure within .5%. Sensor bodies are crafted from 304 Stainless Steel and feature CNC cut threads and wrench flats for reliable sealing and trouble-free installation. Each sensor is packaged with a Delphi connector kit, installation instructions, and a tube of thread sealing compound.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e304 Stainless Steel 7 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003eCNC Cut 1\/8 NPT Threads\u003c\/li\u003e\n\u003cli\u003eIncludes Delphi Connector Kit \u0026amp; Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 7 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1 - Delphi Connector Kit\u003c\/li\u003e\n\u003cli\u003e1 - Tube of Thread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eECUMaster Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"ECUMaster","offers":[{"title":"Default Title","offer_id":20083782254662,"sku":"ECU WHP7M","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/ecumaster-ecu-whp7m-7465370976326.jpg?v=1562795366"},{"product_id":"english-racing-aem-map-sensor-plug-n-play-harness-2003-2006-mitsubishi-evo-8-9-er-map-pnp","title":"English Racing AEM MAP Sensor Plug-n-Play Harness | 2003-2006 Mitsubishi Evo 8\/9 (ER-MAP-PNP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eEvo 8\/9 AEM MAP Sensor Plug-n-Play Harness by English Racing\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe English Racing AEM MAP Sensor Harness for Mitsubishi Evo 8\/9 is a direct plug and play solution which allows you to easily connect the AEM MAP sensor to the stock harness on your Evo 8\/9.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect plug and play fitment for Evo 8\/9\u003c\/li\u003e\n\u003cli\u003eConnects the AEM MAP sensor to the stock harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003 - 2006 Mitsubishi Evo 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - English Racing AEM MAP Sensor Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"English Racing","offers":[{"title":"Default Title","offer_id":29540784734278,"sku":"ENG ER-MAP-PNP","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/english-racing-eng-er-map-pnp-28322493431878.jpg?v=1628760651"},{"product_id":"cobb-4-bar-map-sensor-kit-02-07-subaru-wrx-04-20-sti-04-08-fxt-a12700","title":"COBB 4 Bar MAP Sensor Kit | 02-07 Subaru WRX \/ 04-21 STI \/ 04-08 FXT (A12700)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eCast Manifold Subaru WRX\/STi\/FXT 4-Bar MAP Sensor Upgrade Kit by COBB Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOur Subaru 4 Bar MAP Sensor Kit is a plug and play solution that allows for precise measurement of pressures up to 4 Bar.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis kit consists of both our billet aluminum adapter and pre-terminated 4 Bar sensor. The billet aluminum adapter is anodized black with a laser etched \"C\" logo. 1\/8\" NPT threads allow for simple, leak-free installation of the pressure sensor. An included o-ring and hardware allows for leak-free installation into the throttle body.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe pressure sensor itself is made up of a stainless steel body and flying leads terminated into an OEM quality connector, allowing for direct plug-and-play installation into supported Subarus.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eMost Subarus are equipped with either a 2.5 or 3 bar MAP sensor from the factory which allows accurate reading up to either 21.5psi or 28.8psi (respectively). For vehicles targeting boost values higher than that, an upgraded sensor is required for accurate measurement and control.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Adapter with 1\/8\" NPT Threads\u003c\/li\u003e\n\u003cli\u003eOEM Quality Plug-and-Play Connector\u003c\/li\u003e\n\u003cli\u003eTotal Error Band \u0026lt; 1% Full Scale (+\/- .06psi)\u003c\/li\u003e\n\u003cli\u003eLinear 0.5v to 4.5v Output\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 1 ms Response Time\u003c\/li\u003e\n\u003cli\u003e0-60psi Absolute Pressure Measurement\u003c\/li\u003e\n\u003cli\u003eRetains OEM Sensor DTC Detection Capabilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for precise measurement of pressures up to 4 Bar\u003c\/li\u003e\n\u003cli\u003eDirect plug-and-play installation into supported Subarus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002 - 2007 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2004 - 2020 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2004 - 2008 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 4-Bar Map Sensor\u003c\/li\u003e\n\u003cli\u003e1 - Map Sensor Adapter\u003c\/li\u003e\n\u003cli\u003eLoctite 545 Pipe Thread Sealant\u003c\/li\u003e\n\u003cli\u003eSuperlube PTFE Lubricant\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/849608855\/A12700+A12600+Subaru+Map+Sensor+Adapter+Cast+Manifold+EJ\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB Tuning Products, LLC warrants to the original retail purchaser that all components manufactured by COBB Tuning and purchased from an Authorized COBB Tuning dealer hold a 12-month limited warranty from the date of purchase against defects in materials and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":31343644049478,"sku":"COB A12700","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-a12700-13652395753542.jpg?v=1755754737"},{"product_id":"cobb-4-bar-map-sensor-02-07-subaru-wrx-04-20-sti-04-08-fxt-a12100","title":"COBB 4 Bar MAP Sensor | 2002-2007 Subaru WRX, 2004-2021 Subaru WRX STI, and 2004-2008 Subaru Forester XT (A12100)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eCast Manifold Subaru WRX\/STi\/FXT 4-Bar MAP Sensor (Sensor Only) by COBB Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOur Subaru 4 Bar MAP Sensor is a plug and play solution that allows for precise measurement of pressures up to 4 Bar.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe pressure sensor itself is made up of a stainless steel body and flying leads terminated into an OEM quality connector, allowing for direct plug-and-play installation into supported Subarus.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eMost Subarus are equipped with either a 2.5 or 3 bar MAP sensor from the factory which allows accurate reading up to either 21.5psi or 28.8psi (respectively). For vehicles targeting boost values higher than that, an upgraded sensor is required for accurate measurement and control.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Quality Plug-and-Play Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTotal Error Band \u0026lt; 1% Full Scale (+\/- .06psi)\u003c\/li\u003e\n\u003cli\u003eLinear 0.5v to 4.5v Output\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 1 ms Response Time\u003c\/li\u003e\n\u003cli\u003e0-60psi Absolute Pressure Measurement\u003c\/li\u003e\n\u003cli\u003eRetains OEM Sensor DTC Detection Capabilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for precise measurement of pressures up to 4 Bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: This is the sensor only and requires a 1\/8\" NPT adapter for installation. \u003ca href=\"https:\/\/www.maperformance.com\/products\/cobb-4-bar-map-sensor-kit-02-07-subaru-wrx-04-20-sti-04-08-fxt-a12700\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here\u003c\/a\u003e if you want the full kit with the adapter.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002 - 2007 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2004 - 2020 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2004 - 2008 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 4-Bar Map Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/849608855\/A12700+A12600+Subaru+Map+Sensor+Adapter+Cast+Manifold+EJ\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB Tuning Products, LLC warrants to the original retail purchaser that all components manufactured by COBB Tuning and purchased from an Authorized COBB Tuning dealer hold a 12-month limited warranty from the date of purchase against defects in materials and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":31343688941638,"sku":"COB A12100","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-a12100-28323044851782.jpg?v=1755754736"},{"product_id":"cobb-map-sensor-adapter-02-07-subaru-wrx-04-20-sti-04-08-fxt-a12600","title":"COBB MAP Sensor Adapter | 02-07 Subaru WRX \/ 04-21 STI \/ 04-08 FXT (A12600)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eCast Manifold Subaru WRX\/STi\/FXT MAP Sensor Adapter by COBB Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis billet aluminum MAP Sensor Adapter is anodized black with a laser etched \"C\" logo. 1\/8\" NPT threads allow for simple, leak-free installation of your choice of pressure sensor. An included o-ring and hardware ensure for leak-free installation into the throttle body.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eMost Subarus are equipped with either a 2.5 or 3 bar MAP sensor from the factory which allows accurate reading up to either 21.5psi or 28.8psi (respectively). For vehicles targeting boost values higher than that, an upgraded sensor is required for accurate measurement and control.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish\u003c\/li\u003e\n\u003cli\u003eLaser Etched \"C\" Logo\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT Threads\u003c\/li\u003e\n\u003cli\u003eDirect Fit into Throttle Body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: This is the adapter only and is designed for use with the COBB 4-Bar MAP Sensor. \u003ca href=\"https:\/\/www.maperformance.com\/products\/cobb-4-bar-map-sensor-kit-02-07-subaru-wrx-04-20-sti-04-08-fxt-a12700\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here\u003c\/a\u003e if you want the full kit with the sensor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002 - 2007 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2004 - 2020 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2004 - 2008 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor Adapter\u003c\/li\u003e\n\u003cli\u003eSuperlube PTFE Lubricant\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/849608855\/A12700+A12600+Subaru+Map+Sensor+Adapter+Cast+Manifold+EJ\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB Tuning Products, LLC warrants to the original retail purchaser that all components manufactured by COBB Tuning and purchased from an Authorized COBB Tuning dealer hold a 12-month limited warranty from the date of purchase against defects in materials and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":31343705260102,"sku":"COB A12600","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-a12600-13652499398726.jpg?v=1755754735"},{"product_id":"cobb-4-bar-map-sensor-06-14-wrx-09-13-fxt-05-12-lgt-05-09-obxt-with-plastic-manifold-a22100","title":"Cobb 4 Bar MAP Sensor | 06-14 WRX \/ 09-13 FXT \/ 05-12 LGT \/ 05-09 OBXT with Plastic Manifold (A22100)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4 Bar MAP Sensor for Plastic Manifold Subaru WRX\/FXT\/LGT\/OBXT by Cobb Tuning\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eMost Subarus are equipped with either a 2.5 or 3 bar MAP sensor from the factory which allows accurate reading up to either 21.5psi or 28.8psi (respectively). For vehicles targeting boost values higher than that, an upgraded sensor is required for accurate measurement and control.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eCobb's 4 Bar MAP Sensor for WRX\/FXT\/LGT\/OBXT models with plastic manifolds is a plug and play solution that allows for precise measurement of pressures up to 4 Bar.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe Cobb pressure sensor itself is made up of a stainless steel body and flying leads terminated into an OEM quality connector, allowing for direct plug-and-play installation into supported Subarus.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Quality Plug-and-Play Connector\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT Threads\u003c\/li\u003e\n\u003cli\u003eTotal Error Band \u0026lt;1% Full Scale (+\/- 0.6 psi)\u003c\/li\u003e\n\u003cli\u003e\u0026lt;1ms Response Time\u003c\/li\u003e\n\u003cli\u003eRetains OEM Sensor DTC Detection Capabilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent and precise pressure measurements\u003c\/li\u003e\n\u003cli\u003eSimple and direct plug and play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: SENSOR ONLY, REQUIRES 1\/8\" NPT ADAPTER FOR INSTALL \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006 - 2014 Subaru WRX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2009 - 2013 Subaru Forester XT\u003c\/li\u003e\n\u003cli\u003e2005 - 2012 Subaru Legacy GT\u003c\/li\u003e\n\u003cli\u003e2005 - 2009 Subaru Outback XT\u003c\/li\u003e\n\u003cli\u003eFor models that have plastic intake manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 4 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003eZip Ties\u003c\/li\u003e\n\u003cli\u003eThread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB Tuning Products, LLC warrants to the original retail purchaser that all components manufactured by COBB Tuning hold a 12-month limited warranty from the date of purchase against defects in materials and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":31426402943046,"sku":"COB A22100","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-314250-13733636538438.jpg?v=1755754733"},{"product_id":"cobb-1-8-npt-map-sensor-adapter-06-14-wrx-09-13-fxt-05-12-lgt-05-09-obxt-with-plastic-manifold-a22600","title":"Cobb 1\/8\" NPT MAP Sensor Adapter | 06-14 WRX \/ 09-13 FXT \/ 05-12 LGT \/ 05-09 OBXT with Plastic Manifold (A22600)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e1\/8\" NPT MAP Sensor for Plastic Manifold Subaru WRX\/FXT\/LGT\/OBXT by Cobb Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis billet aluminum MAP Sensor Adapter is anodized black with a laser etched \"C\" logo. 1\/8\" NPT threads allow for simple, leak-free installation of your choice of pressure sensor.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish\u003c\/li\u003e\n\u003cli\u003eLaser Etched \"C\" Logo\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT Threads\u003c\/li\u003e\n\u003cli\u003eDirect Fit into Factory Location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows installation of a 1\/8\" NPT thread pressure sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006 - 2014 Subaru WRX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2009 - 2013 Subaru Forester XT\u003c\/li\u003e\n\u003cli\u003e2005 - 2012 Subaru Legacy GT\u003c\/li\u003e\n\u003cli\u003e2005 - 2009 Subaru Outback XT\u003c\/li\u003e\n\u003cli\u003eFor models that have plastic intake manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 1\/8\" NPT MAP Sensor Adapter\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/879099921\/A22700+A22600+MAP+Sensor+Adapter+Plastic+Manifold\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB Tuning Products, LLC warrants to the original retail purchaser that all components manufactured by COBB Tuning hold a 12-month limited warranty from the date of purchase against defects in materials and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":31426415689798,"sku":"COB A22600","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-a22600-13733647941702.jpg?v=1755754733"},{"product_id":"cobb-4-bar-map-sensor-kit-06-14-wrx-09-13-fxt-05-12-lgt-05-09-obxt-with-plastic-manifold-a22700","title":"Cobb 4 Bar MAP Sensor Kit | 06-14 WRX \/ 09-13 FXT \/ 05-12 LGT \/ 05-09 OBXT with Plastic Manifold (A22700)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4 Bar MAP Sensor Kit for Plastic Manifold Subaru WRX\/FXT\/LGT\/OBXT by Cobb Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eCobb's 4 Bar MAP Sensor Kit is a plug and play solution that allows for precise measurement of pressures up to 4 Bar in WRX\/FXT\/LGT\/OBXT models with plastic intake manifolds.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis kit consists of Cobb's billet aluminum adapter and pre-terminated 4 Bar sensor. The billet aluminum adapter is anodized black with a laser etched \"C\" logo. 1\/8\" NPT threads allow for simple, leak-free installation of the pressure sensor. The barb fitting and included vacuum line allow for direct replacement of the factory sensor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe pressure sensor itself is made up of a stainless steel body and flying leads terminated into an OEM quality connector, allowing for direct plug-and-play installation into supported Subarus.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Quality Plug-and-Play Connector\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Adapter w\/ 1\/8\" NPT Threads\u003c\/li\u003e\n\u003cli\u003eTotal Error Band \u0026lt;1% Full Scale (+\/- 0.6 psi)\u003c\/li\u003e\n\u003cli\u003e\u0026lt;1ms Response Time\u003c\/li\u003e\n\u003cli\u003eRetains OEM Sensor DTC Detection Capabilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent and precise pressure measurements\u003c\/li\u003e\n\u003cli\u003eSimple and direct plug and play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006 - 2014 Subaru WRX\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2009 - 2013 Subaru Forester XT\u003c\/li\u003e\n\u003cli\u003e2005 - 2012 Subaru Legacy GT\u003c\/li\u003e\n\u003cli\u003e2005 - 2009 Subaru Outback XT\u003c\/li\u003e\n\u003cli\u003eFor models that have plastic intake manifolds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 4 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1 - Billet Aluminum Adapter\u003c\/li\u003e\n\u003cli\u003e1 - Silicon Hose\u003c\/li\u003e\n\u003cli\u003eZip Ties\u003c\/li\u003e\n\u003cli\u003eThread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB Tuning Products, LLC warrants to the original retail purchaser that all components manufactured by COBB Tuning hold a 12-month limited warranty from the date of purchase against defects in materials and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":31426419687494,"sku":"COB A22700","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-a22700-13733654822982.jpg?v=1755754732"},{"product_id":"omni-power-t-map-sensor-2015-2020-subaru-wrx-map-wrxt","title":"Omni Power T-MAP Sensor | 2015-2021 Subaru WRX (MAP-15WRXT)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSubaru WRX T-MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA 3, 4 \u0026amp; 5 Bar T-MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. This is a 4 pin map sensor which has a built in temperature sensor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOmni Power 4 bar MAP sensors can precisely calculate boost pressure from 1-43+ psi while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: A tune is required after installation if using the OEM engine management unity.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2021 Subaru WRX (does not fit STI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Omni Power T-MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"3 BAR","offer_id":31981278920774,"sku":"OMN MAP-15WRXT-3BR","price":109.99,"currency_code":"USD","in_stock":true},{"title":"4 BAR","offer_id":31981278953542,"sku":"OMN MAP-15WRXT-4BR","price":114.99,"currency_code":"USD","in_stock":true},{"title":"5 BAR","offer_id":31981278986310,"sku":"OMN MAP-15WRXT-5BR","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-14208688652358.jpg?v=1631289642"},{"product_id":"cobb-tuning-map-sensor-upgrade-kit-2007-2011-porsche-911-801300","title":"Cobb Tuning MAP Sensor Upgrade Kit | 2007-2011 Porsche 911 (801300)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2007-2011 Porsche 911 3 Bar MAP Sensor Upgrade Kit by Cobb Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB Porsche 3-Bar MAP Sensor Kit is a direct replacement and allows \n\nyou to read boost beyond what the factory sensors can measure. With the factory sensors \n\nlimited to around 22 psi, the COBB 3-Bar MAP Sensor Kit will allow accurate measuring up to \n\n30psi.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlug and Play Sensor\u003c\/li\u003e\n\u003cli\u003eRead up to 3 Bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for Running Higher Boost Pressures\u003c\/li\u003e\n\u003cli\u003eBaccurate measuring up to 30psi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2011 Porsche 911\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 3 Bar MAP Sensor Upgrade Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":32167287783494,"sku":"COB 801300","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-801300-14532121100358.jpg?v=1755754725"},{"product_id":"z1002470","title":"APR Tuning OEM Bosch 3 Bar MAP Sensor | 2005 - 2019 Audi I4 2.0 Engines  (Z1002470)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e3 Bar MAP Sensor by APR Tuning \u003c\/h2\u003e\n\u003cp align=\"justify\"\u003e\u003cspan\u003eAPR Tuning OEM Bosch 3 Bar Map Sensor for use with specific APR Stage 3 K04 and GTX Turbocharger Systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 Bar Max Pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Bosch Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"widget_text installation_notes product_info\"\u003ePlease note, this sensor is only for use as a direct factory replacement, or when specified APR and accompanied with appropriate software. Without appropriate software, this sensor will not work correctly if the vehicle was not originally equipped with a 3 Bar map sensor.\u003c\/div\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eFor use on higher boosting applications with applicable software\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplication 1\u003c\/li\u003e\n\u003cli\u003eApplication 2\u003c\/li\u003e\n\u003cli\u003eApplication 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eItem 1\u003c\/li\u003e\n\u003cli\u003eItem 2\u003c\/li\u003e\n\u003cli\u003eItem 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"URL%20GOES%20HERE\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarranty Info\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"APR Tuning","offers":[{"title":"Default Title","offer_id":39265839022150,"sku":"APRT Z1002470","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/apr-tuning-aprt-z1002470-27982948040774.jpg?v=1756244153"},{"product_id":"omni-power-5-bar-t-map-sensor-2015-2021-ford-mustang-ecoboost-map-mus-5br","title":"Omni Power 5 Bar T-MAP Sensor | 2015-2021 Ford Mustang EcoBoost (MAP-MUS-5BR)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eFord Mustang 2.3L EcoBoost 5 Bar T-MAP Sensor by Omni Power\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOmni Power USA MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003ePressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWith the true linear pressure vs. voltage scale there is never a need to re-tune at different altitudes as with other sensors. Competitors sensors on the market don't have true linear scaling which can cause your engine to go out of tune with elevation changes, often resulting in idle problems, poor drivability, and catastrophic engine damage. Omni Power MAP sensors can precisely calculate boost pressure while still allowing smooth stock OEM drivability at any boost level. Conveniently packaged in an OEM dimensional housing for easy install and an OEM look.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCases are designed to withstand in excess of 130 PSI without leaking.\u003c\/li\u003e\n\u003cli\u003e-40 to 260 degrees Fahrenheit temperature operating range.\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation.\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems.\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accuracy over full scale range under all conditions including temperature, altitude, and humidity changes.\u003c\/li\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor.\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market).\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels.\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors turbo MAP sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Image is of a 4 Bar MAP Sensor\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - 2021 Ford EcoBoost Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 5 Bar T-MAP Sensor w\/ Built In Temperature Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Omni Power","offers":[{"title":"Default Title","offer_id":39281976148038,"sku":"OMN MAP-MUS-5BR","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/omni-power-omn-map-mus-5br-28025636880454.jpg?v=1617291775"},{"product_id":"haltech-1-bar-gm-map-sensor-multiple-gm-fitments-ht-010100","title":"Haltech 1 Bar GM MAP Sensor | Multiple GM Fitments (HT-010100)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e1 Bar GM MAP Sensor by Haltech\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eIn today’s modern more complicated cars the ECU or engine management system has an impressive responsibility, controlling the way your car runs, idle speeds, electrical systems and diagnosing problems. In short, it makes sure your car is running as it should and as efficiently as possible, and agreeably it is one of the most important parts of your car’s operating system. With that in mind, it is important to trust the ECU system you install, and you can only do that if you trust the company who manufactured it.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMatching plug and 3 pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUsed to measure Intake Manifold Pressure on Naturally Aspirated engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Do NOT reverse the polarity of active sensors as sensor damage will occur.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - GM MAP Sensor\u003c\/li\u003e\n\u003cli\u003eMatching plug and 3 pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis sensor is strictly non-refundable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39348266893382,"sku":"HAL HT-010100","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/haltech-hal-ht-010100-28173580402758.jpg?v=1757445931"},{"product_id":"haltech-3-bar-motorsport-map-sensor-ht-010134","title":"Haltech Motorsport MAP Sensor (HT-010134)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMotorsport MAP Sensor by Haltech\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eHT-010134 3 Bar Motorsport MAP Sensor is Used to measure Intake Manifold Pressure on Boosted engines up to 2bar boost pressure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4\/5 Bar Motorsport MAP sensor\u003c\/li\u003e\n\u003cli\u003eMatching male Deutsch DTM-3 Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUsed to measure Intake Manifold Pressure on Boosted engines up to 2bar boost pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Do NOT reverse the polarity of active sensors as sensor damage will occur.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor\u003c\/li\u003e\n\u003cli\u003eMatching male Deutsch DTM-3 Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis sensor is strictly non-refundable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"3 Bar","offer_id":39348267122758,"sku":"HAL HT-010134","price":160.0,"currency_code":"USD","in_stock":true},{"title":"4 Bar","offer_id":39348267155526,"sku":"HAL HT-010136","price":175.0,"currency_code":"USD","in_stock":true},{"title":"5 Bar with Steel Diaphram","offer_id":39348267188294,"sku":"HAL HT-010138","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/haltech-28173581025350.jpg?v=1757445926"},{"product_id":"haltech-5-bar-ti-map-sensor-ht-010110","title":"Haltech 5 Bar TI MAP Sensor (HT-010110)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e5 Bar \"TI\" MAP Sensor by Haltech\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eHT-010110 5 Bar \"TI\" MAP Sensor is Used to measure Intake Manifold Pressure on Boosted engines up to 4bar boost pressure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 Bar \"TI\"\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT Thread\u003c\/li\u003e\n\u003cli\u003eMatching plug and pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUsed to measure Intake Manifold Pressure on Boosted engines up to 4bar boost pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:  \"TI\" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1 - -4AN adaptor\u003c\/li\u003e\n\u003cli\u003e1 - Matching plug \u0026amp; pin set\n\u003c\/li\u003e\n\u003cli\u003e1 - 5mm hosetail adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis sensor is strictly non-refundable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39348267221062,"sku":"HAL HT-010110","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/haltech-hal-ht-010110-28173580501062.jpg?v=1757445926"},{"product_id":"haltech-7-bar-ti-map-sensor-ht-010130","title":"Haltech 7 Bar TI MAP Sensor (HT-010130)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e7 Bar \"TI\" MAP Sensor by Haltech\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eHT-010130 7 Bar \"TI\" MAP Sensor is Used to measure Intake Manifold Pressure on Boosted engines up to 6bar boost pressure\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8 NPT Thread\u003c\/li\u003e\n\u003cli\u003eMatching Delphi plug and pins\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUsed to measure Intake Manifold Pressure on Boosted engines up to 6bar boost pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Do NOT reverse the polarity of active sensors as sensor damage will occur.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor\u003c\/li\u003e\n\u003cli\u003eMatching Delphi plug and pins\u003c\/li\u003e\n\u003cli\u003e-4 AN \u0026amp; 5mm hosetail adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis sensor is strictly non-refundable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39348267319366,"sku":"HAL HT-010130","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/haltech-hal-ht-010130-28173580992582.jpg?v=1757445924"},{"product_id":"haltech-plug-and-pins-only-delco-weather-pack-3-pin-gm-style-map-sensor-connector-orange-multiple-gm-fitments-ht-030420","title":"Haltech Plug and -Pins Only - Delco Weather Pack 3 -Pin GM Style MAP Sensor Connector - Orange | Multiple GM Fitments (HT-030420)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eDelco Weather Pack 3 pin GM Style MAP Sensor Connector (Plug and Pins Only) by Haltech\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eHaltech has been at the cutting edge of engine management technology since it first opened its doors in 1986. Today, Haltech ECUs are sold in over 50 countries around the world. They are the driving force behind many record-setting race vehicles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOrange\u003c\/li\u003e\n\u003cli\u003eSuits 3 Bar GM MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: Do NOT reverse the polarity of active sensors as sensor damage will occur.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Plug\u003c\/li\u003e\n\u003cli\u003e3 - Pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHaltech Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Haltech","offers":[{"title":"Default Title","offer_id":39348271120454,"sku":"HAL HT-030420","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/haltech-hal-ht-030420-28173594460230.jpg?v=1757445883"},{"product_id":"torque-solution-map-sensor-adapter-2008-2021-nissan-gt-r-ts-gtr-627","title":"Torque Solution Map Sensor Adapter | 2008-2021 Nissan GT-R (TS-GTR-627)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2008-2021 Nissan GT-R MAP Sensor Adapter by Torque Solution\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eTorque Solution Map Sensor Adapter allows you to easily switch the OEM sensor for a 1\/8\" NPT male threaded map sensor, such as AEM 3.5 Bar Part# 30-2130-50, AEM 5 Bar Part# 30-2130-75 or larger.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT Female thread\u003c\/li\u003e\n\u003cli\u003eFKM Rubber O-Ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to install 1\/8\" NPT male threaded MAP sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2021 Nissan GT-R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTorque Solution offers a limited lifetime warranty on this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":39405251067974,"sku":"TOR TS-GTR-627","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/torque-solution-tor-ts-gtr-627-28284436283462.jpg?v=1628537800"},{"product_id":"stm-map-sensor-adapter-multiple-fitments-stm-map-adapt","title":"STM MAP Sensor Adapter | Multiple Fitments (STM-MAP-ADAPT)","description":"\u003cdiv id=\"newdescr\"\u003e \u003cdiv id=\"newdescrRC\"\u003e \u003ch2\u003eSTM MAP Sensor Adapter for Mitsubishi \u0026amp; Similar Sensors\u003c\/h2\u003e \u003cp align=\"justify\"\u003eThe STM MAP Sensor Adapter allows you to use an OEM Mitsubishi or Omni Power MAP sensor with an intake manifold that does not have mounting points for an OEM style sensor.\u003c\/p\u003e \u003cp align=\"justify\"\u003eThe MAP sensor is a snug fit and new stainless bolts are included, then simply connect the barb fitting with vacuum line to a pressure source on your intake manifold and mount to suit. Fits 2G DSM, Evo 4-9, Evo X, 3000GT, Stealth and many universal applications utilizing an OEM or alike sensor.\u003c\/p\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBillet Aluminum\u003c\/li\u003e \u003cli\u003eOne-Piece Adapter\u003c\/li\u003e \u003cli\u003eFits OEM Mitsubishi or alike sensors\u003c\/li\u003e \u003cli\u003e1\/4\" ID Hose Barb Fitting\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePlease Note: The MAP sensor is not included.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e \u003cdiv id=\"newdescrLC\"\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1996 - 2015 Mitsubishi Evolution 4-10\u003c\/li\u003e \u003cli\u003e1995 - 1999 Mitsubishi Eclipse GST\/GSX\u003c\/li\u003e \u003cli\u003e1991 - 1999 Mitsubishi 3000GT VR-4\u003c\/li\u003e \u003cli\u003e1995 - 1998 Eagle Talon TSi\u003c\/li\u003e \u003cli\u003e1991 - 1996 Dodge Stealth R\/T\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e1 - Adapter (STM-MAP-ADAPT)\u003c\/li\u003e \u003cli\u003e2 - M5 x 16mm Stainless Bolts\u003c\/li\u003e \u003cli\u003e2 - M5 Stainless Flat Washers\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWarranty\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"STM Tuned","offers":[{"title":"Default Title","offer_id":39444999962694,"sku":"STM STM-MAP-ADAPT","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/stm-stm-stm-map-adapt-28358420332614.jpg?v=1739385807"},{"product_id":"speedfactory-4-bar-map-sensor-multiple-acura-honda-fitments-sf-01-015","title":"SpeedFactory 4 BAR MAP Sensor | Multiple Acura\/Honda Fitments (SF-01-015)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMultiple Acura\/Honda Fitments 4 BAR MAP Sensor by SpeedFactory \u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eOur SpeedFactory 4 Bar MAP sensors use state-of-the-art bipolar op amp circuitry with thin film resistor networks built into each microchip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F throughout its range of scale.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e40 to 260 degrees Fahrenheit temperature operating range\u003c\/li\u003e\n\u003cli\u003eAble to respond from 10% of the pressure scale to 90% of the pressure scale in .001 seconds (the fastest response time of any MAP sensor on the market)\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation\u003c\/li\u003e\n\u003cli\u003eTrue linear scaling for perfect drivability at all boost and vacuum levels\u003c\/li\u003e\n\u003cli\u003eCompatible with all aftermarket engine management systems\u003c\/li\u003e\n\u003cli\u003eMinimum of 99% accurate over full scale range under all conditions including temperature, altitude, and humidity changes\u003c\/li\u003e\n\u003cli\u003eEach sensor is hand assembled, pressure, and function checked in the USA for unparalleled quality control prior to shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect plug and play for an easy install and an OEM look. Dimensionally identical to the stock MAP sensor\u003c\/li\u003e\n\u003cli\u003eAllows smoother engine operation, higher boost levels, and better drivability than competitors' turbo MAP sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1994-2001 Acura Integra\u003c\/li\u003e\n\u003cli\u003e1990-1993 Acura Integra (will require 94-01 Integra Throttle Body)\u003c\/li\u003e\n\u003cli\u003e1997-1999 Acura CL All Models\u003c\/li\u003e\n\u003cli\u003e2001-2003 Acura CL V6 (premium only)\u003c\/li\u003e\n\u003cli\u003e1999-2003 Acura TL All Models\u003c\/li\u003e\n\u003cli\u003e1988-2000 Honda Civic All Models\u003c\/li\u003e\n\u003cli\u003e1992-2001 Honda Prelude All Models\u003c\/li\u003e\n\u003cli\u003e1994-2002 Honda Accord All Models\u003c\/li\u003e\n\u003cli\u003e1993-1997 Honda Del Sol All Models\u003c\/li\u003e\n\u003cli\u003e2001-2009 Honda S2000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpeedFactory's Limited Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"SpeedFactory Racing","offers":[{"title":"Red","offer_id":39913842212934,"sku":"SFR SF-01-015","price":113.71,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":39913842245702,"sku":"SFR SF-01-016","price":113.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/speedfactory-racing-sfr-sf-01-015-29078071312454.jpg?v=1744822742"}],"url":"https:\/\/www.maperformance.com\/collections\/map-sensor\/map-sensors.oembed?page=2","provider":"MAPerformance","version":"1.0","type":"link"}