Choose Your Car 
  • Grimmspeed 4G63 3-Port EBCS | 2003-2006 Mitsubishi Evolution 8/9 (057019)
  • Grimmspeed 4G63 3-Port EBCS | 2003-2006 Mitsubishi Evolution 8/9 (057019)
  • Grimmspeed 4G63 3-Port EBCS | 2003-2006 Mitsubishi Evolution 8/9 (057019)
  • Grimmspeed 3-Port EBCS | 2003-2007 Mitsubishi Evo 8/9 (057019) - Modern Automotive Performance
 - 2
  • Grimmspeed 3-Port EBCS | 2003-2007 Mitsubishi Evo 8/9 (057019) - Modern Automotive Performance
 - 3
  • Grimmspeed 4G63 3-Port EBCS | 2003-2006 Mitsubishi Evolution 8/9 (057019)
  • Grimmspeed 4G63 3-Port EBCS | 2003-2006 Mitsubishi Evolution 8/9 (057019)

    MAP price match guarantee Unbeatable Price Guarantee
    no codes, no bs, just parts

    GrimmSpeed

    Grimmspeed 4G63 3-Port EBCS | 2003-2006 Mitsubishi Evolution 8/9

    PART# GRI 057019
    We Price Match!

    Contact us to ensure you're getting the right part for your car at the absolute best pricing on earth!

    Email - sales@maperformance.com
    Phone 1(888)627-3736



    $ 116.00

    Built To Order Delivered by , to your door when ordered within hrs and mins
    Fits Your
    MAP Loyalty: Earn $ 2.32 Toward Next Purchase!

    Evo 8/9 EBCS By Grimmspeed (057019)

    A MBC allows you to run higher than stock boost levels by preventing the wastegate from opening at its rated pressure. It does a great job at this but if boost is available under the MBC setting it will give you that full boost. So for instance, you set your MBC to 18psi because from 3000-6000rpm that's what you want. But then say you get detonation with 18psi when you are at 7000rpm unless you are below 16psi. With a MBC, you do not have this control so you are forced to run 16psi through the entire rev range. With an electronic boost controller you could run 18psi from 3000-6000 and 16psi at 7000rpm because you can tune the boost map in the ECU which will allow you to run the maximum amount of boost at every given rpm. This gives you more power throughout the range and better control.

    Revolutionizing the EVO boost solenoid market, we have created model specific install brackets that allow you to directly fit our Boost Solenoid into your EVO for a factory fit. No more Zip-tying! We give you the factory fitment you have been waiting for. Staying with the OEM fitment theme, our Boost Solenoid uses a EVO style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting the oem wiring and crimping wires together!

    Also new to the EVO boost solenoid market, we have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you don't have to worry about them snapping off like the plastic hose fittings!

    057019 Features

    • Get into Boost Much Quicker (Flows 10% more than most the competition)
    • Plug and Play into OEM Harness (no splicing wire like other EBCS!)
    • Factory Fit with clean install
    • Works Safely with Factory EVO ECU (custom voltage to match ECU)
    • Nickel Plated Fittings as this is Built To Last (not the easily breakable plastic fittings!)
    • Easy to Install and Very Easy to Tune
    • The Only Direct Bolt-IN EBCS for EVO

    EBCS Benefits

    • Users can use AN fittings with the solenoid.
    • MAC Valve has completely custom made the valve for us(only MAC valve on the market to be custom made for automotive tuning use).
    • Specifically designed by GrimmSpeed to work safely with the factory EVO ECU (requires tuning) and to reliably handle the vibrations and temperatures of your engine bay!
    • The only direct bolt in design for the EVO. Direct bolt in mounting bracket and hardware included! (specify which model before ordering)
    • Faster response and greater flow than any other valve out there. (by more than 10%!)
    • Nickel plated brass fittings. (unlike the competitors failure prone plastic fittings)

    Applications

    • 2003-2006 Mitsubishi Evo 8/9

    What's in the box?

    • 1 3-Port EBCS

    Warranty

    • Grimmspeed Limited Warranty

    Evo 8/9 EBCS By Grimmspeed (057019)

    A MBC allows you to run higher than stock boost levels by preventing the wastegate from opening at its rated pressure. It does a great job at this but if boost is available under the MBC setting it will give you that full boost. So for instance, you set your MBC to 18psi because from 3000-6000rpm that's what you want. But then say you get detonation with 18psi when you are at 7000rpm unless you are below 16psi. With a MBC, you do not have this control so you are forced to run 16psi through the entire rev range. With an electronic boost controller you could run 18psi from 3000-6000 and 16psi at 7000rpm because you can tune the boost map in the ECU which will allow you to run the maximum amount of boost at every given rpm. This gives you more power throughout the range and better control.

    Revolutionizing the EVO boost solenoid market, we have created model specific install brackets that allow you to directly fit our Boost Solenoid into your EVO for a factory fit. No more Zip-tying! We give you the factory fitment you have been waiting for. Staying with the OEM fitment theme, our Boost Solenoid uses a EVO style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting the oem wiring and crimping wires together!

    Also new to the EVO boost solenoid market, we have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you don't have to worry about them snapping off like the plastic hose fittings!

    057019 Features

    • Get into Boost Much Quicker (Flows 10% more than most the competition)
    • Plug and Play into OEM Harness (no splicing wire like other EBCS!)
    • Factory Fit with clean install
    • Works Safely with Factory EVO ECU (custom voltage to match ECU)
    • Nickel Plated Fittings as this is Built To Last (not the easily breakable plastic fittings!)
    • Easy to Install and Very Easy to Tune
    • The Only Direct Bolt-IN EBCS for EVO

    EBCS Benefits

    • Users can use AN fittings with the solenoid.
    • MAC Valve has completely custom made the valve for us(only MAC valve on the market to be custom made for automotive tuning use).
    • Specifically designed by GrimmSpeed to work safely with the factory EVO ECU (requires tuning) and to reliably handle the vibrations and temperatures of your engine bay!
    • The only direct bolt in design for the EVO. Direct bolt in mounting bracket and hardware included! (specify which model before ordering)
    • Faster response and greater flow than any other valve out there. (by more than 10%!)
    • Nickel plated brass fittings. (unlike the competitors failure prone plastic fittings)

    Applications

    • 2003-2006 Mitsubishi Evo 8/9

    What's in the box?

    • 1 3-Port EBCS

    Warranty

    • Grimmspeed Limited Warranty

    Customer Reviews

    Based on 24 reviews
    100%
    (24)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    J.
    Perfect

    A need of your going to tune your vehicle

    J
    J.R.
    Great

    Love it, quick shipping, exactly as expected

    C
    C.m.
    Perfect

    If your still running the stock ebc on the evo your missing out, better control of boost. More consistent boost curve shipping is A+++++

    H
    H.
    Great Boost Controller.

    Highly recommended to control boost accurately. Can’t be more happier with my purchase thank you MAP

    M
    M.
    Sweet

    The perfect upgrade to make more power!

    MAP Limited Lifetime Warranty

    1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship.

    2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review.

    3.) You must create a support ticket to acquire your return authorization number prior to returning the product.

    4.) Warranty claims will not be honored if the product was not purchased through an approved dealer.

    For warranty evaluation please create a support ticket via this form here.

    We use cookies to offer a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Please review our privacy policy & cookies information page.  If you continue you consent to our privacy policy & use of cookies.Accept

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia or the UK. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within your country. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within California. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.