{"title":"Dynamic Friction Company","description":"","products":[{"product_id":"dfc-front-4000-hybridynamic-brake-pads-and-hardware-kit-2003-2020-subaru-wrx-sti-4000-1001-01","title":"DFC Front 4000 HybriDynamic Brake Pads and Hardware Kit | 2020 Subaru WRX \/ 13-17 STI \/ 17-20 BRZ \u0026 Toyota 86 (4000-1001-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2020 - 2020 Subaru WRX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2013 - 2017 Subaru WRX STI\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017 - 2020 Subaru BRZ\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017 - 2020 Toyota 86\u003cstrong\u003e*\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Front Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Front Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966043910214,"sku":"4000-1001-01-DFC","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-1001-01_v1_1.jpg?v=1778617481"},{"product_id":"dfc-front-hi-carbon-alloy-geomet-coated-rotor-2008-2015-mitsubishi-lancer-evo-x-900-72043","title":"DFC Front Hi-Carbon Alloy Geomet Coated OE Rotor | 2008-2015 Mitsubishi Lancer Evo X (900-72043)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eHi-Carbon Alloy GEOMET Coated Front Rotor by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEach rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eNext, each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAfter all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with our application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFinally, a genuine GEOMET® Finish is applied throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with premium G3000\/G11H18 iron castings for strength, stability, and durability.\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.\u003c\/li\u003e\n\u003cli\u003eDipped cores to provide for a smoother vane structure.\u003c\/li\u003e\n\u003cli\u003eDisc Thickness Variation (DTV) - .010mm maximum\u003c\/li\u003e\n\u003cli\u003eLateral Runout - .050 mm maximum\u003c\/li\u003e\n\u003cli\u003e100% precision mill-balanced for smoother stopping and zero vibration at any speed.\u003c\/li\u003e\n\u003cli\u003eFined Turned finish (1.6 RMS) for improved initial rotor and pad break-in.\u003c\/li\u003e\n\u003cli\u003eGEOMET® coated to provide high-performance corrosion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X*\u003c\/li\u003e\n\u003cli\u003e*Front Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - DFC Hi-Carbon Alloy GEOMET Coated Rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966043975750,"sku":"900-72043-DFC","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/900-72043_v2_2.jpg?v=1778082425"},{"product_id":"dfc-rear-hi-carbon-alloy-geomet-coated-rotor-2008-2015-mitsubishi-lancer-evo-x-900-72042","title":"DFC Rear Hi-Carbon Alloy Geomet Coated OE Rotor | 2008-2015 Mitsubishi Evo X (900-72042)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eHi-Carbon Alloy GEOMET Coated Rear Rotor by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEach rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eNext, each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAfter all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with our application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFinally, a genuine GEOMET® Finish is applied throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with premium G3000\/G11H18 iron castings for strength, stability, and durability.\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.\u003c\/li\u003e\n\u003cli\u003eDipped cores to provide for a smoother vane structure.\u003c\/li\u003e\n\u003cli\u003eDisc Thickness Variation (DTV) - .010mm maximum\u003c\/li\u003e\n\u003cli\u003eLateral Runout - .050 mm maximum\u003c\/li\u003e\n\u003cli\u003e100% precision mill-balanced for smoother stopping and zero vibration at any speed.\u003c\/li\u003e\n\u003cli\u003eFined Turned finish (1.6 RMS) for improved initial rotor and pad break-in.\u003c\/li\u003e\n\u003cli\u003eGEOMET® coated to provide high-performance corrosion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X*\u003c\/li\u003e\n\u003cli\u003e*Rear Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - DFC Hi-Carbon Alloy GEOMET Coated Rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966044041286,"sku":"900-72042-DFC","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/900-72042_v2_2.jpg?v=1778081858"},{"product_id":"dfc-rear-hi-carbon-alloy-geomet-coated-rotor-2008-2020-subaru-wrx-900-13022","title":"DFC Rear Hi-Carbon Alloy Geomet Coated OE Rotor | 08-14 Subaru WRX \/ 08-17 STI (900-13022)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eHi-Carbon Alloy GEOMET Coated Rear Rotor by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEach rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eNext, each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAfter all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with our application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFinally, a genuine GEOMET® Finish is applied throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with premium G3000\/G11H18 iron castings for strength, stability, and durability.\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.\u003c\/li\u003e\n\u003cli\u003eDipped cores to provide for a smoother vane structure.\u003c\/li\u003e\n\u003cli\u003eDisc Thickness Variation (DTV) - .010mm maximum\u003c\/li\u003e\n\u003cli\u003eLateral Runout - .050 mm maximum\u003c\/li\u003e\n\u003cli\u003e100% precision mill-balanced for smoother stopping and zero vibration at any speed.\u003c\/li\u003e\n\u003cli\u003eFined Turned finish (1.6 RMS) for improved initial rotor and pad break-in.\u003c\/li\u003e\n\u003cli\u003eGEOMET® coated to provide high-performance corrosion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2014 Subaru WRX*\u003c\/li\u003e\n\u003cli\u003e2008-2017 Subaru WRX STI*\u003c\/li\u003e\n\u003cli\u003e*Rear Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - DFC Hi-Carbon Alloy GEOMET Coated Rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966044106822,"sku":"900-13022-DFC","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/33df8b305c84bd0bbdb514ff0d0fe83bL.jpg?v=1778083090"},{"product_id":"dfc-rear-4000-hybridynamic-brake-pads-and-hardware-kit-2012-2021-subaru-wrx-4000-1114-01","title":"DFC Rear 4000 HybriDynamic Brake Pads and Hardware Kit | Multiple Subaru Fitments (4000-1114-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 Subaru BRZ\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2023 Subaru Crosstrek\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2009-2018 Subaru Forester\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008-2023 Subaru Impreza\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2005-2014 Subaru Legacy\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2005-2014 Subaru Outback\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2012-2021 Subaru WRX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2013-2015 Subaru XV Crosstrek\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Rear Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Rear Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966045057094,"sku":"4000-1114-01-DFC","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-1114-01_v1_1.jpg?v=1778617466"},{"product_id":"dfc-front-hi-carbon-alloy-geomet-coated-rotor-2013-2017-subaru-wrx-sti-900-13016","title":"DFC Front Hi-Carbon Alloy Geomet Coated OE Rotor | 08-14 Subaru WRX \/ 08-17 STI (900-13016)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eHi-Carbon Alloy GEOMET Coated Front Rotor by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEach rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eNext, each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAfter all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with our application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFinally, a genuine GEOMET® Finish is applied throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with premium G3000\/G11H18 iron castings for strength, stability, and durability.\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.\u003c\/li\u003e\n\u003cli\u003eDipped cores to provide for a smoother vane structure.\u003c\/li\u003e\n\u003cli\u003eDisc Thickness Variation (DTV) - .010mm maximum\u003c\/li\u003e\n\u003cli\u003eLateral Runout - .050 mm maximum\u003c\/li\u003e\n\u003cli\u003e100% precision mill-balanced for smoother stopping and zero vibration at any speed.\u003c\/li\u003e\n\u003cli\u003eFined Turned finish (1.6 RMS) for improved initial rotor and pad break-in.\u003c\/li\u003e\n\u003cli\u003eGEOMET® coated to provide high-performance corrosion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2014 Subaru WRX*\u003c\/li\u003e\n\u003cli\u003e2008-2017 Subaru WRX STI*\u003c\/li\u003e\n\u003cli\u003e*Front Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - DFC Hi-Carbon Alloy GEOMET Coated Rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966045253702,"sku":"900-13016-DFC","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/900-13016_v2_2.jpg?v=1778083691"},{"product_id":"dfc-front-4000-hybridynamic-brake-pads-and-hardware-kit-2013-2021-honda-civic-4000-0914-01","title":"DFC Front 4000 HybriDynamic Brake Pads and Hardware Kit | Multiple Honda\/Acura Fitments (4000-0914-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013-2015 Acura ILX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2003-2017 Honda Accord\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2013-2021 Honda Civic EX\/LX\/Sport\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2002-2004 Honda CR-V\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016 Honda CR-Z\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2003-2011 Honda Element\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2013-2014 Honda Fit\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Front Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Front Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966045319238,"sku":"4000-0914-01-DFC","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-0914-01_v1_1.jpg?v=1778688734"},{"product_id":"dfc-front-4000-hybridynamic-brake-pads-and-hardware-kit-2015-2021-subaru-wrx-4000-1078-01","title":"DFC Front 4000 HybriDynamic Brake Pads and Hardware Kit | Multiple Subaru Fitments (4000-1078-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2006-2007 Subaru B9 Tribeca\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2014-2018 Subaru Forester\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2005-2019 Subaru Legacy\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2010-2019 Subaru Outback\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008-2014 Subaru Tribeca\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2015-2021 Subaru WRX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Front Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Front Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966045450310,"sku":"4000-1078-01-DFC","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-1078-01_v1_1.jpg?v=1778617445"},{"product_id":"dfc-rear-4000-hybridynamic-brake-pads-and-hardware-kit-2016-2025-subaru-wrx-4000-1808-01","title":"DFC Rear 4000 HybriDynamic Brake Pads and Hardware Kit | Multiple Subaru Fitments (4000-1808-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2019-2025 Subaru Ascent\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2019-2026 Subaru Crosstrek\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2019-2026 Subaru Forester\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2024-2025 Subaru Impreza\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2015-2025 Subaru Legacy\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2015-2025 Subaru Outback\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2025 Subaru WRX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Rear Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Rear Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966046335046,"sku":"4000-1808-01-DFC","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-1808-01_v1_1.jpg?v=1778617433"},{"product_id":"dfc-rear-4000-hybridynamic-brake-pads-and-hardware-kit-2016-2026-honda-civic-4000-1878-01","title":"DFC Rear 4000 HybriDynamic Brake Pads and Hardware Kit | Multiple Honda\/Acura Fitments (4000-1878-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2024-2026 Acura Integra\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2019 Acura RDX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2026 Honda Civic\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2026 Honda Prelude\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Rear Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Rear Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966046367814,"sku":"4000-1878-01-DFC","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-1878-01_v1_1_f192dcd8-4c5a-40a2-9649-c739051c2ee8.jpg?v=1778688057"},{"product_id":"dfc-front-drilled-hi-carbon-alloy-geomet-coated-rotor-2018-2021-subaru-wrx-sti-920-13041","title":"DFC Front Drilled Hi-Carbon Alloy Geomet Coated Rotor | 2018-2021 Subaru WRX STI (920-13041)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eHi-Carbon Alloy GEOMET Coated \u0026amp; Drilled Front Rotor by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEach rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eNext, each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAfter all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with our application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFinally, a genuine GEOMET® Finish is applied throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with premium G3000\/G11H18 iron castings for strength, stability, and durability.\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.\u003c\/li\u003e\n\u003cli\u003eDipped cores to provide for a smoother vane structure.\u003c\/li\u003e\n\u003cli\u003eDisc Thickness Variation (DTV) - .010mm maximum\u003c\/li\u003e\n\u003cli\u003eLateral Runout - .050 mm maximum\u003c\/li\u003e\n\u003cli\u003e100% precision mill-balanced for smoother stopping and zero vibration at any speed.\u003c\/li\u003e\n\u003cli\u003eFined Turned finish (1.6 RMS) for improved initial rotor and pad break-in.\u003c\/li\u003e\n\u003cli\u003eGEOMET® coated to provide high-performance corrosion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2018-2021 Subaru WRX STI*\u003c\/li\u003e\n\u003cli\u003e*Front Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - DFC Drilled Hi-Carbon Alloy GEOMET Coated Rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966047580230,"sku":"920-13041-DFC","price":108.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/920-13041_v2_2.jpg?v=1778084197"},{"product_id":"dfc-rear-drilled-hi-carbon-alloy-geomet-coated-rotor-2018-2021-subaru-wrx-sti-920-13042","title":"DFC Rear Drilled Hi-Carbon Alloy Geomet Coated Rotor | 2018-2021 Subaru WRX STI (920-13042)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eHi-Carbon Alloy GEOMET Coated \u0026amp; Drilled Rear Rotor by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEach rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eNext, each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAfter all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with our application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFinally, a genuine GEOMET® Finish is applied throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with premium G3000\/G11H18 iron castings for strength, stability, and durability.\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.\u003c\/li\u003e\n\u003cli\u003eDipped cores to provide for a smoother vane structure.\u003c\/li\u003e\n\u003cli\u003eDisc Thickness Variation (DTV) - .010mm maximum\u003c\/li\u003e\n\u003cli\u003eLateral Runout - .050 mm maximum\u003c\/li\u003e\n\u003cli\u003e100% precision mill-balanced for smoother stopping and zero vibration at any speed.\u003c\/li\u003e\n\u003cli\u003eFined Turned finish (1.6 RMS) for improved initial rotor and pad break-in.\u003c\/li\u003e\n\u003cli\u003eGEOMET® coated to provide high-performance corrosion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2018-2021 Subaru WRX STI*\u003c\/li\u003e\n\u003cli\u003e*Rear Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - DFC Drilled Hi-Carbon Alloy GEOMET Coated Rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966047744070,"sku":"920-13042-DFC","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/920-13042_v2_2.jpg?v=1778084748"},{"product_id":"dfc-rear-4000-hybridynamic-brake-pads-and-hardware-kit-2018-2025-subaru-wrx-4000-2118-01","title":"DFC Rear 4000 HybriDynamic Brake Pads and Hardware Kit | 24-25 Subaru WRX \/ 18-21 STI (4000-2118-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2024 - 2025 Subaru WRX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2018 - 2021 Subaru WRX STI\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Rear Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Rear Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966047973446,"sku":"4000-2118-01-DFC","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/xxxx-2118-01_v1_1.jpg?v=1778617423"},{"product_id":"dfc-front-4000-hybridynamic-brake-pads-and-hardware-kit-2019-2025-honda-civic-sedan-4000-2185-01","title":"DFC Front 4000 HybriDynamic Brake Pads and Hardware Kit | 22-26 Honda Civic \/ 19-22 Insight (4000-2185-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2026 Honda Civic EX\/LX\/Sport\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2019-2022 Honda Insight\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Front Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Front Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966048432198,"sku":"4000-2185-01-DFC","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/xxxx-2185-01_v1_1_1.jpg?v=1778685850"},{"product_id":"dfc-front-drilled-hi-carbon-alloy-geomet-coated-rotor-2023-2026-honda-civic-hatchback-920-59065","title":"DFC Front Drilled Hi-Carbon Alloy Geomet Coated Rotor | 2017-2026 Honda Civic Type-R (920-59065)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eHi-Carbon Alloy GEOMET Coated \u0026amp; Drilled Front Rotor by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEach rotor is engineered to match the OE vane configuration, including the OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eNext, each rotor is machined to the tightest tolerances available in the market today. We can guarantee specifications of .010mm disc thickness variation (DTV) and .050mm maximum lateral runout. Though in practice, we regularly achieve .007mm DTV and .025mm maximum lateral runout. Then, the rotors are fine-turned to a maximum of 1.6 RMS. The objective of these strict tolerances is to create the smoothest possible finish, which improves initial break-in due to the increased contact between the pad and the rotor.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAfter all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Coupled with our application-specific DFC brake pads, these rotors provide the best possible braking right out of the box compared to anything else in the market!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFinally, a genuine GEOMET® Finish is applied throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET® coating is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The GEOMET® Finish is simply and safely swept away by the friction material with no harmful effects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered with premium G3000\/G11H18 iron castings for strength, stability, and durability.\u003c\/li\u003e\n\u003cli\u003eOriginal Equipment (OE) vane configuration to ensure proper and maximum heat dissipation.\u003c\/li\u003e\n\u003cli\u003eDipped cores to provide for a smoother vane structure.\u003c\/li\u003e\n\u003cli\u003eDisc Thickness Variation (DTV) - .010mm maximum\u003c\/li\u003e\n\u003cli\u003eLateral Runout - .050 mm maximum\u003c\/li\u003e\n\u003cli\u003e100% precision mill-balanced for smoother stopping and zero vibration at any speed.\u003c\/li\u003e\n\u003cli\u003eFined Turned finish (1.6 RMS) for improved initial rotor and pad break-in.\u003c\/li\u003e\n\u003cli\u003eGEOMET® coated to provide high-performance corrosion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2026 Honda Civic Type-R*\u003c\/li\u003e\n\u003cli\u003e*Front Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - DFC Drilled Hi-Carbon Alloy GEOMET Coated Rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966048890950,"sku":"920-59065-DFC","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/920-59065_v2_2.jpg?v=1778085310"},{"product_id":"dfc-front-4000-hybridynamic-brake-pads-2023-2026-honda-civic-type-r-4000-1001-00","title":"DFC Front 4000 HybriDynamic Brake Pads | Multiple Fitments (4000-1001-00)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2024-2026 Acura Integra\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2004-2008 Acura TL\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2012-2017 Buick Regal\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2018-2020 Buick Regal Sportback\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2013-2019 Cadillac ATS\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2018 Cadillac CT6\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2014-2019 Cadillac CTS\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2006-2011 Cadillac STS\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2020 Chevrolet Camaro\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2014-2019 Chevrolet Corvette\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2015-2017 Dodge Viper\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2005-2006 Ford GT\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2007-2014 Ford Mustang\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017-2026 Honda Civic Type-R\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2026 Honda Prelude\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2003-2015 Mitsubishi Evo 8-10\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2009 Pontiac G8\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2011 Saab 9-5\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017-2020 Subaru BRZ\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2004-2014 Subaru Impreza\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2020 Subaru WRX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2015-2017 Subaru WRX STI\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2014-2021 Tesla S\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2021 Tesla X\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017-2020 Toyota 86\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2004-2007 Volvo S60\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2004-2007 Volvo V70\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Front Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Front Pads*\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e*Hardware Not Included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966048956486,"sku":"4000-1001-00-DFC","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-1001-00_vd1_1.jpg?v=1778684682"},{"product_id":"dfc-front-4000-hybridynamic-brake-pads-and-hardware-kit-2024-2025-subaru-wrx-4000-1365-01","title":"DFC Front 4000 HybriDynamic Brake Pads and Hardware Kit | 24-25 Subaru WRX \/ 18-21 STI (4000-1365-01)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e4000 HybriDynamic Brake Pads by DFC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics, making it the ideal choice for daily driving.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAll DFC Brake Pads are 100% post cured to ensure stable friction performance. Each pad is then scorched to remove uncured bonding agents to minimize the need for initial break-in period and increase stopping power from the initial stop. Lastly, the pads assembled with DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent fade resistance\u003c\/li\u003e\n\u003cli\u003eExtremely low dust characteristics\u003c\/li\u003e\n\u003cli\u003e100% Copper Free Eco Friendly Formulation\u003c\/li\u003e\n\u003cli\u003eStable friction performance across a wide temperature range\u003c\/li\u003e\n\u003cli\u003eChamfered and Slotted (where applicable) to reduce noise when braking\u003c\/li\u003e\n\u003cli\u003eScorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop\u003c\/li\u003e\n\u003cli\u003ePositive mold to promote consistent friction material density\u003c\/li\u003e\n\u003cli\u003ePromotes better friction to plate adhesion, minimizing noise.\u003c\/li\u003e\n\u003cli\u003eActs as a thermal barrier by minimizing the heat transfer from the pad into the caliper, reducing the possibility of fluid boil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2024 - 2025 Subaru WRX\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2018 - 2021 Subaru WRX STI\u003cstrong\u003e*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e*Front Fitment Only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Set of Front Pads\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic Friction Company (DFC) provides a limited warranty that its brake products will be free from defects in materials and workmanship for a period of 12 months or 12,000 miles (whichever occurs first) from the date of original purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Dynamic Friction Company","offers":[{"title":"Default Title","offer_id":44966049022022,"sku":"4000-1365-01-DFC","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/4000-1365-01_v1_1.jpg?v=1778616218"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/collections\/image_5.png?v=1783963003","url":"https:\/\/www.maperformance.com\/collections\/dynamic-friction-company\/drilled.oembed","provider":"MAPerformance","version":"1.0","type":"link"}