Choose Your Car 
  • Comp Turbo CT2 Billet Triplex Ball Bearing 5858 Turbocharger | (233300-0008) - Modern Automotive Performance
 - 1
  • Comp Turbo CT2 Billet Triplex Ball Bearing 5858 Turbocharger | (233300-0008) - Modern Automotive Performance
 - 2
  • Comp Turbo CT2 Billet Triplex Ball Bearing 5858 Turbocharger | (233300-0008) - Modern Automotive Performance
 - 3
  • Comp Turbo CT2 Billet Triplex Ball Bearing 5858 Turbocharger (233300-0008)

    MAP price match guarantee Unbeatable Price Guarantee

    Comp Turbo

    Comp Turbo CT2 Billet Triplex Ball Bearing 5858 Turbocharger

    PART#
    We Price Match!

    Contact us to ensure you're getting the right part for your car at the absolute best pricing on earth!

    Email - sales@maperformance.com
    Phone 1(888)627-3736



    $ 1,449.00

    Built To Order Free delivery by , to your door when ordered within hrs and mins
    Fits Your
    MAP Loyalty: Earn $ 28.98 Toward Next Purchase!

    The Triplex Ceramic ball bearing technology results in several important performance improvements compared to a conventional sleeve bearing systems. One important advantage is that the Triplex Ceramic can carry both axial and radial loads so that the need for a conventional thrust bearing is eliminated. The power loss attributed to a conventional thrust bearing is proportional to the fourth power of the radius and can amount to several horsepower at the high speeds at which turbochargers operate. The Triplex Ceramic is capable of carrying both high thrust loads and radial loads at the same time and usually absorb only fractions of a HP due to the anti friction characteristics.

    The Triplex Ceramic balls are also 60% lighter than steel balls and operate with lower vibration levels. Since centrifugal forces are significantly reduced at high speeds, their service life is two to five times longer. There is less heat build-up in the ceramic bearings during operation and they can reach operational speed up to 50% higher than steel ball bearings. These favorable mechanical characteristics of the ceramic ball bearings make them an ideal choice for turbocharger bearing systems that run at high operating speeds and are subjected to high exhaust gas temperatures.

    Features

    • For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve
    • The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance
    • The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance
    • The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life
    • An aluminum or mild steel weld base mounting flange is furnished with each unit. The use of 6061 aluminum allows the housing to be anodized with a selection of colors
    • This new more compact recirculating BOV is set up to accept two different types of return fittings - 1" for Bosch style BPV's and 1.34" for DSM and Evo type valves. Please specify size at time of order
    • A nice feature of this BOV is that you can swap bottom with the bottom of a Q BOV to make it a fully vent to atmosphere BOV

    Features

    • Horsepower rating 350-680
    • X-HF Billet wheel technology
    • Z-HF Turbine wheel technology
    • Available in oil-less, oil only, or oil with water cooled

    Specs

    • Compressor Wheel
      Aerospace aluminum material
      55mm inducer

    • Turbine Wheel
      713C inconel material
      58mm exducer

    • A/R Options:
      .36 T3 gate port 5 bolt (internal gate optional)
      .36 T3 non port 4 bolt 2.5"
      .48 T3 gate port 5 bolt (internal gate optional)
      .48 T3 non port 4 bolt 2.5"
      .63 T3 non port 4 bolt 2.5"
      .82 T3 3" V-band
      2.5" V band outlet on NP housing (optional)
      3" V band outlet on NP housing (optional)
      T2 internally gated .64 and .86
      TiAL v-band inlet/outlet .64 and .86

    Please Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.

    Applications

    • Universal

    What's in the Box?

    • Turbo CT2 Billet Triplex Ball Bearing 5858 Turbocharger

    Warranty

    1 Year limited warranty

    The Triplex Ceramic ball bearing technology results in several important performance improvements compared to a conventional sleeve bearing systems. One important advantage is that the Triplex Ceramic can carry both axial and radial loads so that the need for a conventional thrust bearing is eliminated. The power loss attributed to a conventional thrust bearing is proportional to the fourth power of the radius and can amount to several horsepower at the high speeds at which turbochargers operate. The Triplex Ceramic is capable of carrying both high thrust loads and radial loads at the same time and usually absorb only fractions of a HP due to the anti friction characteristics.

    The Triplex Ceramic balls are also 60% lighter than steel balls and operate with lower vibration levels. Since centrifugal forces are significantly reduced at high speeds, their service life is two to five times longer. There is less heat build-up in the ceramic bearings during operation and they can reach operational speed up to 50% higher than steel ball bearings. These favorable mechanical characteristics of the ceramic ball bearings make them an ideal choice for turbocharger bearing systems that run at high operating speeds and are subjected to high exhaust gas temperatures.

    Features

    • For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve
    • The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance
    • The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance
    • The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life
    • An aluminum or mild steel weld base mounting flange is furnished with each unit. The use of 6061 aluminum allows the housing to be anodized with a selection of colors
    • This new more compact recirculating BOV is set up to accept two different types of return fittings - 1" for Bosch style BPV's and 1.34" for DSM and Evo type valves. Please specify size at time of order
    • A nice feature of this BOV is that you can swap bottom with the bottom of a Q BOV to make it a fully vent to atmosphere BOV

    Features

    • Horsepower rating 350-680
    • X-HF Billet wheel technology
    • Z-HF Turbine wheel technology
    • Available in oil-less, oil only, or oil with water cooled

    Specs

    • Compressor Wheel
      Aerospace aluminum material
      55mm inducer

    • Turbine Wheel
      713C inconel material
      58mm exducer

    • A/R Options:
      .36 T3 gate port 5 bolt (internal gate optional)
      .36 T3 non port 4 bolt 2.5"
      .48 T3 gate port 5 bolt (internal gate optional)
      .48 T3 non port 4 bolt 2.5"
      .63 T3 non port 4 bolt 2.5"
      .82 T3 3" V-band
      2.5" V band outlet on NP housing (optional)
      3" V band outlet on NP housing (optional)
      T2 internally gated .64 and .86
      TiAL v-band inlet/outlet .64 and .86

    Please Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.

    Applications

    • Universal

    What's in the Box?

    • Turbo CT2 Billet Triplex Ball Bearing 5858 Turbocharger

    Warranty

    1 Year limited warranty

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    MAP Limited Lifetime Warranty

    1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship.

    2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review.

    3.) You must create a support ticket to acquire your return authorization number prior to returning the product.

    4.) Warranty claims will not be honored if the product was not purchased through an approved dealer.

    For warranty evaluation please create a support ticket via this form here.

    We use cookies to offer a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Please review our privacy policy & cookies information page.  If you continue you consent to our privacy policy & use of cookies.Accept

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia or the UK. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within your country. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within California. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately we are not able to ship this item outside of the United States.
    If you have any questions please contact us at: 1-888-627-3736 or Email Us Here.

    Hello!

    Unfortunately we are not able to ship this item outside of the United States.
    If you have any questions please contact us at: 1-888-627-3736 or Email Us Here.