{"title":"Black Friday Boost \u0026 Intercooler Deals","description":null,"products":[{"product_id":"water-methanol-injection-tank-kit-replacement-5-gallon-reservoir-by-aem-electronics","title":"AEM Water\/Methanol Injection Tank Kit Replacement 5 Gallon Reservoir (30-3320)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eWater\/Methanol Injection Tank Kit Replacement 5 Gallon Reservoir by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AEM Water\/Methanol 5 Gallon Tank can be used with nearly any water methanol kit using a 1\/4 inch OD hose for extended range or as an upgrade to competitor systems that supply tanks less than 5 gallons. The tank includes a high-tech conductive low fluid level indicator with a positive lock connector and color-matched wires to the wiring harness. Comprehensive hardware for mounting is included. Dimensions: 21 inches long x 8 inches wide x 10 inches tall with cap installed (9 inches tall without cap). All AEM Water\/Methanol injection systems and components (pump, lines, fittings, filter, flow sensor, tank, and nozzles) are 100 percent chemically compatible with methanol. However, for safety reasons, it is strongly recommended that users never use more than a 50 percent methanol concentration in systems.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from High-Quality Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Water\/Methanol Injection Tank Kit Replacement 5 Gallon Reservoir\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Cold Air Intake\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAEM's Standard Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5296932547,"sku":"AEM 30-3320","price":206.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-3320-11991618027590.jpg?v=1753466924"},{"product_id":"v2-water-methanol-injection-kit-no-tank-for-subaru-wrx-sti-evo-20hp-by-aem-electronics","title":"AEM V3 Water\/Methanol Injection Kit (30-3302)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eV3 Water\/Methanol Injection Kit by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eWater\/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water Injection Kits utilize robust hardware and deliver more advanced features than any other comparably priced water\/methanol injection system.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe new controller designs (Boost Dependent Kit PN 30-3300 \u0026amp; Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOur breakthrough injector design uses unique Swirl Generator Technology that improves atomization to deliver faster inlet temp cooling and uses less fluid to maintain inlet air cooling. We include three Swirl Generators that deliver 250cc, 500cc, and 1000cc of flow. The AEM V3 WMI injector is included in every AEM Water\/Methanol injection kit and is a direct replacement\/upgrade for the V2 injector in older systems (V3 Injector PN 30-3315).\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eIn testing at AEM, the new V3 250cc WMI nozzle and the V2 250cc WMI nozzle both achieved a 90-degree inlet temp reduction; however, the V3 nozzle design achieved this reduction nearly 6.5 seconds faster. Consider that on an average sportsman drag car this can represent close to 40% of track time. On a road race car, applying more timing 6.5 seconds faster can mean a critical time to pass on a corner exit.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWe then tested a V3 250cc injector against a V2 500cc injector to see if the larger V2 injector would improve cooling speed. The V2 500cc injector achieved nearly identical cooling speed as the V3 250cc injector, but it required almost 44% more fluid to achieve the same cooling. Less fluid used means fewer refills of your WMI tank and less money spent refilling it. Using the V2 500cc nozzle with a one-gallon tank, you will get close to 7 minutes and 50 seconds of run time at full pressure. Using the V3 250cc nozzle with a one-gallon tank, you will get 13 minutes and 30 seconds of run time at full pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAEM’s internally-bypassed water\/methanol injection pump is waterproof and safe for mounting in loactions that are exposed the elements. It does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAEM’s gas Water\/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eAEM’s Water\/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from High-Quality Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease power, reduce air inlet temps, and suppress detonation at all boost levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - V3 Water\/Methanol Injection Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAEM's Standard Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5297015299,"sku":"AEM 30-3302","price":477.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-3302-3744346179.jpg?v=1753466923"},{"product_id":"subaru-2008-2014-wrx-sti-forester-legacy-gt-3-port-boost-control-solenoid-by-cobb-tuning-715750","title":"Cobb Tuning 3-Port Boost Control Solenoid | Multiple Subaru Fitments (715750)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eCobb Tuning 3-Port Boost Control Solenoid | Multiple Subaru Fitments (715750)\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB 3-Port Boost Solenoid (BCS) is an excellent upgrade for modern turbocharged vehicles, enabling precise boost control in a tidy package that is easy to install and tune. Our BCS will eliminate boost fluctuations inherent in the OEM boost control system, providing stable and repeatable boost control to base the vehicle's tune on. It is equally capable of providing this stable boost control at stock boost levels as well as extremely high boost levels associated with big-power builds.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port BCS features 1\/8\" low-profile barb fittings to keep the unit compact and are nickel coated for corrosion resistance. Optional 1\/4\" nickel plated fittings are also available separately. Viton spools and seals are used throughout for long life and lubricated with Dow Corning silicone grease. The manual override is sealed with an O-ring, the wiring harness is sealed to the casing using a waterproof grommet and the solenoid wires are ultrasonically welded to the coil, making the device waterproof and safe to wash. The BCS is rated to operate up to 120psi.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eCOBB Tuning has made the COBB 3-Port BCS installation as simple as possible. It mounts in the stock location and plugs directly into the stock wiring harness, making the physical install and electrical connection as simple as possible. The BCS comes with a custom aluminum mounting bracket, stainless steel hardware, boost-line to complete all connections and zip-ties to route the boost-line neatly through the engine bay. Installation Instructions are provided, are easy to understand, and provide routing instructions for both internal and external wastegate configurations.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port BCS is engineered to be the ultimate electronic boost control device for modern turbocharged applications, designed with outstanding boost control, engineered for consistent performance and extended service life and configured for easy installation. Get your boost under control and Access the Potential of your turbocharged Subaru today!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cstrong\u003eWarning! The installation of this 3-port solenoid requires proper tuning. The use of a COBB OTS map designed for a stock solenoid, with a 3-port solenoid installed, will result in drastic under or over boost behavior. Always match your tune with the exact components and installation method required for that tune. This includes how the hoses are routed to\/from the EBCS, and which boost restrictor pills are present. If you have any questions or concerns and will be using an OTS map, please contact us. If you'll be using a custom tune, talk to your Protuner about which EBCS and hose routing method they desire for your application. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate and Consistent Boost Control\u003c\/li\u003e\n\u003cli\u003ePlug and Play 18-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003e1\/8\" Nickel Plated Barbed Fittings\u003c\/li\u003e\n\u003cli\u003eRated up to 120psi\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum BCS Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe COBB 3-Port Boost Control Solenoid (BCS) adds the flexibility and precision needed for properly controlling boost via the factory ECU. Many upgrades to the turbocharging system (such as larger turbochargers and external wastegates) require the increased performance, reliability, flexibility, safety and installation options that the COBB 3-Port BCS provides\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2020 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2008-2014 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2005-2009 \u003cspan\u003eSubaru \u003c\/span\u003eLegacy GT\u003c\/li\u003e\n\u003cli\u003e2005-2009 Subaru Outback XT\u003c\/li\u003e\n\u003cli\u003e2009-2013 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoost Control Solenoid\u003c\/li\u003e\n\u003cli\u003eHose\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware \u0026amp; Zip Ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/56819754\/712750+715750-COBB+3-PORT+ELECTRONIC+BOOST+CONTROL+SOLENOID?moved=true\" target=\"_blank\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13398742339,"sku":"COB 715750","price":157.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-715750-11975412940870.jpg?v=1755755087"},{"product_id":"perrin-ebcs-pro-boost-control-solenoid-2015-2018-subaru-wrx-asm-tac-727","title":"Perrin EBCS Pro Boost Control Solenoid | 2015-2021 Subaru WRX (ASM-TAC-727)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eEBCS Pro Boost Control Solenoid by Perrin\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe custom made solenoid coil and valve are made specific to PERRIN specs. This allows the valve to operate almost two times faster and flow almost 50% more than competitors' designs. The EBCS Pro also works with OEM ECU calibrations and reduces overboost conditions that commonly occur, all without causing Check Engine Lights.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOur OEM male connector is specific to all Subaru applications. A As for 2015-2018 WRX models, the PERRIN male OEM connector is specific to the 2015-2018 WRX (FA20 DIT). This ensures a properly sealed and solid connection between the EBCS Pro and the ECU. Unlike competitors' products that require additional parts and labor, our unique design saves time and makes for a cleaner and simpler install.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe main valve body of the EBCS Pro is made of corrosion-resistant, nickel-plated brass with proper seals to withstand the temperatures and oils seen in a boost control system. Other features unique to the PERRIN EBCS Pro:\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe body of the EBCS Pro is made of 6061 aluminum so it can easily survive under-hood temperatures. The unique PERRIN configuration allows the EBCS Pro to be ultra-compact and work with multiple boost control system setups (internal and external wastegates). This allows the part to adapt to your ever-changing setups.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eHigh quality nickel plated brass fittings resist corrosion and will not break. For race professionals the EBCS Pro will also accept AN fittings for the best connection possible. Every EBCS Pro comes with the proper amount of vacuum hose and the proper fittings and mounting plates for your specific year, make, and model Subaru, making for a quick and easy installation process.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCustom high performance solenoid coil and valve made specific to Perrin specs\u003c\/li\u003e\n\u003cli\u003eOperates twice as fast and flow almost 50% more than competitor's designs\u003c\/li\u003e\n\u003cli\u003eApplication-specific OEM male connector ensures a properly sealed and solid connection\u003c\/li\u003e\n\u003cli\u003eMain valve body made of corrosion-resistant, nickel-plated brass\u003c\/li\u003e\n\u003cli\u003eAnodized 6061 aluminum multi-port body easily survives under-hood temperatures\u003c\/li\u003e\n\u003cli\u003eUnique configuration allows the EBCS Pro to be ultra-compact and work with multiple boost control setups\u003c\/li\u003e\n\u003cli\u003eHigh quality nickel-plated brass fittings resist corrosion and will not break\u003c\/li\u003e\n\u003cli\u003eComes with the proper amount of vacuum hose and application-specific fittings and mounting plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015 - 2021 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - PERRIN EBCS Pro assembly\u003c\/li\u003e\n\u003cli\u003e1 - 5\/32\" ID Vacuum hose\u003c\/li\u003e\n\u003cli\u003e1 - Bracket for washer bottle\u003c\/li\u003e\n\u003cli\u003e2 - 5\/32\" Nickel barb 1\/8NPT, 90 degree\u003c\/li\u003e\n\u003cli\u003e1 - 5\/32\" Nickel barb 1\/8NPT, straight\u003c\/li\u003e\n\u003cli\u003e1 - M8 Button head screw\u003c\/li\u003e\n\u003cli\u003e2 - M8 Flat washers\u003c\/li\u003e\n\u003cli\u003e1 - 3\/16\"-3\/16\" Plastic connector\u003c\/li\u003e\n\u003cli\u003e1 - M5 Short arm hex key\u003c\/li\u003e\n\u003cli\u003e4 - Zip ties\u003c\/li\u003e\n\u003cli\u003eWarranty, instructions, stickers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/ASM-TAC-727.pdf?7823617842783339980\" target=\"_blank\"\u003eClick Here for Installation Notes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePerrin Performance 1 Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":5328866755,"sku":"PER ASM-TAC-727","price":159.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/perrin-performance-per-asm-tac-727-3574576021574.jpg?v=1751467849"},{"product_id":"perrin-04-11-subaru-sti-05-08-legacy-gt-02-11-wrx-04-09-forester-xt-brushed-turbo-heat-shield-psp-ext-001","title":"Perrin Turbo Heat Shield | Subaru Multiple Fitments (PSP-EXT-001)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSubaru WRX\/STI Turbo Heat Shield by Perrin Performance\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe PERRIN Turbo Heat Shield is CNC formed from 304 stainless steel. The backside of the shield is cut to fit all aftermarket downpipes. It is also adjustable front to back allowing the tuner to cover as much of the turbo as possible from application to application. High quality stainless steel hardware included.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOur shield covers more of the turbo charger, leaving less of the exhaust housing exposed. It covers the top of the downpipe, the sides of the turbo and is formed to fit around the wastegate arm. All to help keep heat under the shield where it belongs! The PERRIN Turbo Heat Shield is adjustable to allow the shield to be pulled over the turbo as much as possible.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe PERRIN Turbo Heat Shield uses only high quality spot welds that pass the \"Nugget Test\". During a production run, we actually ripped apart a test joint. The sheet metal should fail before the weld, leaving a small \"nugget\" of metal behind, verifying the spot weld penetrated all layers of metal.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003eCNC Formed\u003c\/li\u003e\n\u003cli\u003eSpot Welded\u003c\/li\u003e\n\u003cli\u003eAdjustable Length\u003c\/li\u003e\n\u003cli\u003eProvides Protection from Radiant Heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002 - 2014 Subaru Impreza WRX\u003c\/li\u003e\n\u003cli\u003e2004 - 2014 Subaru Impreza WRX STI\u003c\/li\u003e\n\u003cli\u003e2015 - 2021 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2005 - 2009 Subaru Forester XT\u003c\/li\u003e\n\u003cli\u003e2005 - 2009 Subaru Outback XT\u003c\/li\u003e\n\u003cli\u003e2005 - 2009 Subaru Legacy GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - PERRIN Turbo Heat Shield\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\u003cli\u003eWarranty Information\u003c\/li\u003e\n\u003cli\u003eStickers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/97608.pdf?17939567430949889869\" target=\"_blank\"\u003eClick Here for Installation Notes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePerrin Performance 5 Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":5329288515,"sku":"PER PSP-EXT-001","price":93.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/perrin-performance-per-psp-ext-001-28370947637318.jpg?v=1751467757"},{"product_id":"nos-single-fogger-wet-kit","title":"NOS Single Fogger Wet Kit","description":"'-50-150 HP gain \u003ceol\u003e-Includes 10 lb bottle \u003ceol\u003e-Intercooler Effect \u003ceol\u003e-Drop Intake Temperatures \u003ceol\u003e-More Dense Intake Charge \u003ceol\u003e-Eliminates All Turbo Lag \u003ceol\u003e-Instant Torque Gains \u003ceol\u003e-Fully Adjustable Power Settings \u003ceol\u003e\n\u003cp\u003eImportant Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.\u003c\/p\u003e\n\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"NOS","offers":[{"title":"Default Title","offer_id":5330380483,"sku":"NOS 05130NOS","price":1168.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/nos-nos-05130nos-28285543153734.jpg?v=1756244609"},{"product_id":"nos-purge-valve-4an","title":"NOS Purge Valve (-4AN)","description":"The primary purpose of a purge valve is to release trapped air or gaseous Nitrous from feed line(s). Helps to ensure consistent performances. And it looks cool, too. You've probably seen the Import or Pro Mod guys do it. Includes all required components.\n\u003cp\u003eImportant Note: This item is not vehicle specific. It is compatible with a wide range of applications and is therefore displayed on our site regardless of your vehicle selection. Please review the specifications and verify compatibility prior to placing your order.\u003c\/p\u003e","brand":"NOS","offers":[{"title":"Default Title","offer_id":5330382211,"sku":"NOS 16030NOS","price":238.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/nos-nos-16030nos-3767995331.jpg?v=1756244609"},{"product_id":"mishimoto-upper-intercooler-pipe-kit-mitsubishi-evo-x-mmicp-evo-10u","title":"Mishimoto Upper Intercooler Pipe Kit | 2008-2015 Mitsubishi Evo X (MMICP-EVO-10U)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMitsubishi Lancer Evolution X Upper Intercooler Pipe Kit, 2008+\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eUpgrade your restrictive and failure-prone factory Evo intercooler pipe with the Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit, precision engineered for the Mitsubishi Evolution X. This kit features polished 2.5\" mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. The Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit will provide reliable charge-air connections as well as improved throttle response, perfect for your daily driver or rallycross Evo. This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cstrong\u003eInstallation Torque Specs\u003c\/strong\u003e - 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for the Evo X\u003c\/li\u003e\n\u003cli\u003eLightweight, polished aluminum pipes\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInner Piping Diameter: 2.375\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOuter Piping Diameter: 2.50\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eYour choice of black, red, or blue couplers\u003c\/li\u003e\n\u003cli\u003eCARB EO #: D-759\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSilicone Couplers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCoupler 1: 1.73\" \/ 2.44\", 2.125\" \/ 2.83\"\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCoupler 2: 2.44\", 2.83\"\u003c\/li\u003e\n\u003cli\u003eCoupler 3: 2.44\", 2.83\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(2) Polished Aluminum Pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(3) Silicone Couplers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(5) 2.75\" T-bolt Clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) 2\" T-bolt Clamp\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003en\/a\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":5330656643,"sku":"MIS MMICP-EVO-10UBK","price":299.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/mishimoto-mis-mmicp-evo-10ubk-black-28377769574470.jpg?v=1750074495"},{"product_id":"mishimoto-race-intercooler-for-evo-7-8-9-silver-mmint-evo-01x","title":"Mishimoto Race Intercooler for Evo 7 \/ 8 \/ 9 - Silver (MMINT-EVO-01X)","description":"Put an end to high AITs with the Mishimoto Mitsubishi Lancer Evolution 7\/8\/9 Race Intercooler! This intercooler was precision engineered specifically for the Lancer Evolution and is a completely bolt-in upgrade. The intercooler utilizes a large, 3.5” thick bar-and-plate core which has been designed with a strategic core composition to provide optimal reductions in intake temperatures and minimal pressure loss. The Mishimoto race intercooler is compatible with both stock and Mishimoto intercooler piping and will support vehicles from stock to 600 whp. Our 350 whp test vehicle showed an 8 whp \/ 10 wtq increase in power compared to the stock intercooler, and the Mishimoto intercooler was able to reduce temperatures by 28°F (16°C). Not only was this intercooler designed with power and efficiency in mind, but our engineers also crafted smooth cast end tanks to promote proper air dispersion through the core, improved airflow, and exceptional durability. Air intake temperatures play a huge role in power output, tuning, and performance. Whether you are taking your Evo through a rally stage or making a pass at the strip, lower temperatures will be extremely beneficial. This intercooler is available with a Sleek Silver or Stealth Black powder-coated finish for enhanced durability and protection against road debris. As with all our products, the Mishimoto Evolution Race Intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.\u003ceol\u003e\u003ceol\u003e\u003cul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003ceol\u003e\u003cli\u003eLarge, 3.5” thick bar-and-plate core with strategic core composition provides optimal cooling and minimal pressure loss\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eProvided 8 whp \/ 10 wtq and reduced intake temperatures by 28°F (16°C) compared to the factory cooler on a test vehicle making 350 whp\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eProvides efficient intake temperature reduction for vehicles from stock to 600 whp\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eCompatible with stock and Mishimoto intercooler pipes\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eAll-aluminum cast end tanks provide improved airflow, superior air dispersion through the core, and exceptional strength\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eAvailable with a Sleek Silver or Stealth Black powder-coated finish for enhanced durability and protection against road debris\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/ul\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":5330731907,"sku":"MIS MMINT-EVO-01X","price":756.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/mishimoto-mis-mmint-evo-01x-3768196867.jpg?v=1750074400"},{"product_id":"mishimoto-race-intercooler-for-evo-7-8-9-black-mmint-evo-01xb","title":"Mishimoto Race Intercooler for Evo 7 \/ 8 \/ 9 - Black (MMINT-EVO-01XB)","description":"Put an end to high AITs with the Mishimoto Mitsubishi Lancer Evolution 7\/8\/9 Race Intercooler! This intercooler was precision engineered specifically for the Lancer Evolution and is a completely bolt-in upgrade. The intercooler utilizes a large, 3.5” thick bar-and-plate core which has been designed with a strategic core composition to provide optimal reductions in intake temperatures and minimal pressure loss. The Mishimoto race intercooler is compatible with both stock and Mishimoto intercooler piping and will support vehicles from stock to 600 whp. Our 350 whp test vehicle showed an 8 whp \/ 10 wtq increase in power compared to the stock intercooler, and the Mishimoto intercooler was able to reduce temperatures by 28°F (16°C). Not only was this intercooler designed with power and efficiency in mind, but our engineers also crafted smooth cast end tanks to promote proper air dispersion through the core, improved airflow, and exceptional durability. Air intake temperatures play a huge role in power output, tuning, and performance. Whether you are taking your Evo through a rally stage or making a pass at the strip, lower temperatures will be extremely beneficial. This intercooler is available with a Sleek Silver or Stealth Black powder-coated finish for enhanced durability and protection against road debris. As with all our products, the Mishimoto Evolution Race Intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.\u003ceol\u003e\u003ceol\u003e\u003cul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003ceol\u003e\u003cli\u003eLarge, 3.5” thick bar-and-plate core with strategic core composition provides optimal cooling and minimal pressure loss\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eProvided 8 whp \/ 10 wtq and reduced intake temperatures by 28°F (16°C) compared to the factory cooler on a test vehicle making 350 whp\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eProvides efficient intake temperature reduction for vehicles from stock to 600 whp\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eCompatible with stock and Mishimoto intercooler pipes\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eAll-aluminum cast end tanks provide improved airflow, superior air dispersion through the core, and exceptional strength\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eAvailable with a Sleek Silver or Stealth Black powder-coated finish for enhanced durability and protection against road debris\u003c\/li\u003e\n\u003ceol\u003e\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/ul\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":5330732227,"sku":"MIS MMINT-EVO-01XB","price":756.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/mishimoto-mis-mmint-evo-01xb-11985310318662.jpg?v=1750074399"},{"product_id":"mishimoto-performance-intercooler-dodge-neon-srt-4-03-05-mmint-srt4-03","title":"Mishimoto Performance Intercooler | 2003-2005 Dodge Neon SRT-4 (MMINT-SRT4-03)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eDodge Neon SRT-4 Intercooler\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eWhether you drive your SRT-4 daily or blast around the autocross course on weekends, cool intake temperatures are key to optimal engine performance and reliability. Mishimoto has the perfect solution for the shortcomings of the factory tube-and-fin cooler. The Mishimoto SRT-4 intercooler is constructed with high-quality cast end tanks for improved airflow and increased durability.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis intercooler utilizes a large bar-and-plate core, which reduces intake temperatures by more than 15% while delivering 40% less pressure drop than the factory cooler. This extremely efficient intercooler is designed to function with all factory equipment, including the factory bumper crash bar, making this the perfect bolt-on upgrade for improving the efficiency of your charge air system.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis design significantly reduces the effects of heat soak, which improves performance on the strip and the street. This intercooler requires no vehicle modification, yet it will support substantial boost pressure and horsepower.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2005 Dodge Neon SRT-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Intercooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":5330732675,"sku":"MIS MMINT-SRT4-03SL","price":464.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/mishimoto-mis-mmint-srt4-03sl-28288314015814.jpg?v=1750074398"},{"product_id":"mishimoto-lower-intercooler-pipe-kit-mitsubishi-evo-x-mmicp-evo-10l","title":"Mishimoto Lower Intercooler Pipe Kit | 2008-2015 Mitsubishi Evo X (MMICP-EVO-10L)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMitsubishi Evo X Lower Intercooler Pipe Kit by Mishimoto\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eReplace your restrictive and failure-prone factory Evo intercooler pipe with the Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit, precision engineered for flawless fitment and optimal flow for the Mitsubishi Evolution X. The kit includes everything needed to upgrade your lower intercooler pipe, remove restrictive bends, and support substantial boost pressure and horsepower.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis kit features polished 2.5\" mandrel-bent aluminum piping and four-layer 100% silicone couplers with heat-resistant embedded fibers, which offer increased heat and pressure tolerance compared to the factory rubber connections. Whether you have a daily-driven Evo or a rally project, dependable charge-air connections are essential for reliable operation.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection. These clamps provide the holding power you need for increased boost pressures! This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for the Evo X\u003c\/li\u003e\n\u003cli\u003eLightweight, polished aluminum pipes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eCARB EO #: D-759\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOffers Flawless Fitment and Optimal Flow\u003c\/li\u003e\n\u003cli\u003eEliminates Restrictive Bends\u003c\/li\u003e\n\u003cli\u003eSupports Substantial Boost Pressure \u0026amp; Horsepower\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePipe ID: 2.375\"\u003c\/li\u003e\n\u003cli\u003ePipe OD: 2.50\"\u003c\/li\u003e\n\u003cli\u003eCoupler 1: 2.44\"\/2.71\", 2.83\"\/3.11\"\u003c\/li\u003e\n\u003cli\u003eCoupler 2: 2.44\", 2.83\"\u003c\/li\u003e\n\u003cli\u003eCoupler 3: 2.44\", 2.83\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Polished Aluminum Pipes\u003c\/li\u003e\n\u003cli\u003e3 - Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e5 - 2.75\" T-bolt Clamps\u003c\/li\u003e\n\u003cli\u003e1 - 3\" T-bolt Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.mishimoto.com\/media\/productpdf\/MMICP-EVO-10_INSTALLATIONGUIDE.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":5330753027,"sku":"MIS MMICP-EVO-10LBK","price":248.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/mishimoto-mis-mmicp-evo-10lbk-black-28301078495302.png?v=1750074372"},{"product_id":"mishimoto-limited-edition-eat-sleep-race-m-line-aluminum-intercooler-mmint-umg","title":"Mishimoto Limited Edition Eat Sleep Race M-Line Aluminum Intercooler (MMINT-UMG)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eUniversal M-Line Intercooler\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eSleek and stylish, this universal front-mount intercooler will provide the perfect cooling capacity needed for smaller turbo applications. All Mishimoto intercoolers are constructed of 6061 aluminum and are TIG welded to perfection.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRobust, one-piece cast aluminum end tanks withstand high boost pressures\u003c\/li\u003e\n\u003cli\u003e4 universal mounting points\u003c\/li\u003e\n\u003cli\u003econstructed with 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eTig welded to perfection\u003c\/li\u003e\n\u003cli\u003eMax Recommended PSI 32 psi\u003c\/li\u003e\n\u003cli\u003eCore Length 23.5\"\u003c\/li\u003e\n\u003cli\u003eCore Height 11.75\"\u003c\/li\u003e\n\u003cli\u003eCore Width 3.0\"\u003c\/li\u003e\n\u003cli\u003eInlet \/ Outlet 3.0\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstallation Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":5330753987,"sku":"MIS MMINT-UMG","price":316.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/mishimoto-mis-mmint-umg-28364968788038.png?v=1750074370"},{"product_id":"mishimoto-intercooler-2001-2007-mitsubishi-evo-7-8-9-mmint-lan-789","title":"Mishimoto Intercooler | 2001-2007 Mitsubishi Evo 7\/8\/9 (MMINT-LAN-789)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMITSUBISHI LANCER EVOLUTION 7\/8\/9 INTERCOOLER\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe Mishimoto aluminum intercooler designed for the Mitsubishi Evo 7, 8, 9 is the perfect bolt-on upgrade for your stock Evo intercooler. Crafted using tig welded, high quality aluminum, the Mishimoto Mitsubishi Evo 7, 8, 9 intercooler is designed to provide added horsepower through improved cooling efficiency. Test runs on the dyno resulted in a 24.5 horsepower increase versus the stock intercooler set-up.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOverall size: 31.38\" x 15.35\" x 5.31\"\u003c\/li\u003e\n\u003cli\u003eCore size: 19.33\" x 11.42\" x 2.7\"\u003c\/li\u003e\n\u003cli\u003eInlet\/Outlet: 2.44\"\u003c\/li\u003e\n\u003cli\u003eMax. Recommended PSI: 50.75psi\u003c\/li\u003e\n\u003cli\u003eFin Pitch: 9.8 Fins\/Inch\u003c\/li\u003e\n\u003cli\u003eTank Wall Thickness: 2.5mm\u003c\/li\u003e\n\u003cli\u003eApplication Specific Mounting Points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-fit for the Mitsubishi Lancer Evolution 7\/8\/9\u003c\/li\u003e\n\u003cli\u003eDyno proven 24.5 whp increase versus stock intercooler\u003c\/li\u003e\n\u003cli\u003eProvides efficient intake temperature reduction\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCARB EO #: D-759\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2006 Mitsubishi Evo 7\/8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Intercooler\u003c\/li\u003e\n\u003cli\u003e(1) 2.75\" Constant Tension T-Bolt Clamp\u003c\/li\u003e\n\u003cli\u003e(6) 3.25\" Constant Tension T-Bolt Clamps\u003c\/li\u003e\n\u003cli\u003e(1) 3.5\" Constant Tension T-Bolt Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":5330755715,"sku":"MIS MMINT-LAN-789","price":506.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/mishimoto-mis-mmint-lan-789-11995016757318.jpg?v=1750074367"},{"product_id":"map-turbocharger-oil-feed-line-kit-mitsubishi-evo-x","title":"MAP Turbocharger Oil Feed Line Kit | 2008-2015 Mitsubishi Evo X (EVOX-OFL)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eTurbo Oil Feed Line for Evo X\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis is our high flow replacement oil supply line for all EVO X stock frame journal bearing turbos. Our filter supply line provides plenty of flow to keep lubrication to the turbo's bearings which is essential. Included in our supply line kit is our MAP inline filter with a replaceable filter element which helps to ensure the turbo is receiving good, clean oil, free of particulate matter or debris.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Quality Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBanjo Fittings for Factory Connection\u003c\/li\u003e\n\u003cli\u003e-4an 45° adapter\u003c\/li\u003e\n\u003cli\u003eCopper Washers\u003c\/li\u003e\n\u003cli\u003e-4an Oil Filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\n\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"MAPerformance","offers":[{"title":"Default Title","offer_id":5331028355,"sku":"MAP EVOX-OFL","price":147.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/maperformance-map-evox-ofl-11952487268422.jpg?v=1751889914"},{"product_id":"map-turbocharger-oil-feed-line-kit-mitsubishi-evo-8-9","title":"MAP Turbocharger Oil Feed Line Kit | 2003-2006 Mitsubishi Evo 8\/9","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eOil Feed Line Kit for Evo 8\/9 Stock Frame Turbochargers\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThis is our high flow replacement oil supply line for all Evo 8\/9 stock frame journal bearing turbos. Our filter supply line provides plenty of flow to keep lubrication to the turbo's bearings which is essential. Included in our supply line kit is our MAP inline filter with a replaceable filter element which helps to ensure the turbo is receiving good, clean oil, free of particulate matter or debris.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis filter can be used in conjunction with stock frame turbos OR even the stock Evo 8\/9 turbo!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved flow over stock oil feed setup\u003c\/li\u003e\n\u003cli\u003eInline filter features a replaceable element\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2006 Mitsubishi Evo 8\/9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two sections of -4AN line with fittings\u003c\/li\u003e\n\u003cli\u003eMAP standard in line oil feed filter\u003c\/li\u003e\n\u003cli\u003eAdapters to fit both housing AND turbo feed inlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\n\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"MAPerformance","offers":[{"title":"Default Title","offer_id":5331028611,"sku":"MAPT EVO9-OFL","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/maperformance-mapt-evo9-ofl-28278435676230.jpg?v=1751889912"},{"product_id":"map-lower-intercooler-pipe-2008-2015-mitsubishi-evo-x-map-evox-licp","title":"MAP Lower Intercooler Pipe | 2008-2015 Mitsubishi Evo X (EVOX-LICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eLower Intercooler Pipe\u003c\/h2\u003e\n\u003cp\u003eAll MAPerformance fabricated products are hand made in house by very skilled fabricators. We bend our own tubing, machine our own flanges, design jigs, weld, port, and R\u0026amp;D right here in the USA with locally sourced raw material. So buy with confidence, know that you are getting the best product on the market for your vehicle!\u003c\/p\u003e\n\u003cp\u003eThe MAP EVO X Lower Intercooler Pipe is a significant upgrade over the factory GSR or MR (USDM and JDM) intercooler pipe. It is designed to be a one piece unit to avoid having to use excess couplers, and to have the smoothest transition from the intercooler to the throttle body. It also incorporates a bracket to hold the lower radiator hose just like the factory pipe. It requires no modification for install and can be completed in under 2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: This pipe is intended to be used with intercoolers with straight end tank outlets, not OEM style angled end-tanks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5 Mandrel Bent 304SS USA-Made Stainless Steel Tubing\u003c\/li\u003e\n\u003cli\u003eSquirrelly Performance Stainless T-bolt Clamps\u003c\/li\u003e\n\u003cli\u003e4 Ply Squirrelly Performance Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eFully Tig Welded with back-purge\u003c\/li\u003e\n\u003cli\u003eUtilizes factory BOV connection\u003c\/li\u003e\n\u003cli\u003eFits GSR and MR, USDM and JDM\u003c\/li\u003e\n\u003cli\u003eWill work with factory airbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Lower Intercooler Pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/EVOX-LICP.pdf?11063544662204692552\" target=\"“_blank”\" rel=\"“\" noreferrer=\"\u0026gt;Download Install Instructions Here\u0026lt;\/a\u0026gt;!\u0026lt;\/li\u0026gt;\n\u0026lt;\/ul\u0026gt;\n\u0026lt;\/div\u0026gt;\n\u0026lt;\/div\u0026gt;\n\u0026lt;div class=clear\u0026gt;\u0026lt;\/div\u0026gt;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"MAPerformance","offers":[{"title":"Polished","offer_id":5331057603,"sku":"MAP EVOX-LICP","price":208.49,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black","offer_id":39406519746630,"sku":"MAP EVOX-LICP-WB","price":233.33,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Red","offer_id":39406519779398,"sku":"MAP EVOX-LICP-WR","price":233.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/maperformance-fabrication-map-evox-licp-polished-28329197633606.jpg?v=1751889897"},{"product_id":"map-front-upper-intercooler-pipe-2008-2015-mitsubishi-evolution-x-evox-fuicp","title":"MAP Front Upper Intercooler Pipe | 2008-2015 Mitsubishi Evolution X (EVOX-FUICP)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2008-2015 Mitsubishi Evolution X Front Intercooler Pipe by MAPerformance\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe MAP Mitsubishi Evo X Front Upper Intercooler Pipe works with the MAP Rear Intercooler pipe to eliminate the factory aluminum pipe to increase power and reliability. It is mandrel bent and uses high quality 304 stainless steel to not only dress up your engine bay, but get that extra kick in horsepower!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth Mandrel Bends\u003c\/li\u003e\n\u003cli\u003e304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003e4-Ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eT-Bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - MAP Front Upper Intercooler Pipe\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/EVOX-FUICP.pdf?5340760892807971386\" rel=\"“\" target=\"“_blank”\" noreferrer=\"\"\u003eDownload Install Instructions Here\u003c\/a\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\n\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance","offers":[{"title":"Brushed \/ No Thanks","offer_id":5331093507,"sku":"MAP EVOX-FUICP","price":108.32,"currency_code":"USD","in_stock":true},{"title":"Brushed \/ Add MAP Rear Upper Intercooler Pipe","offer_id":39406519484486,"sku":"MAP EVOX-ICPKIT","price":208.33,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black \/ No Thanks","offer_id":39406519517254,"sku":"MAP EVOX-FUICP-WB","price":133.33,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Black \/ Add MAP Rear Upper Intercooler Pipe","offer_id":39406519550022,"sku":"MAP EVOX-ICPKIT-WB","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Red \/ No Thanks","offer_id":40559828205638,"sku":"MAP EVOX-FUICP-WR","price":133.33,"currency_code":"USD","in_stock":true},{"title":"Red \/ Add MAP Rear Upper Intercooler Pipe","offer_id":40559828238406,"sku":"MAP EVOX-ICPKIT-WR","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/maperformance-29930169237574.jpg?v=1751889892"},{"product_id":"map-billet-intercooler-upgrade-2015-ford-mustang-ecoboost-ebm-ic","title":"MAP Billet Intercooler Upgrade | 2015-2018 Ford Mustang Ecoboost (EBM-IC)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eEcoboost Intercooler Billet Upgrade\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eAll MAPerformance fabricated products are hand made in house by very skilled fabricators. We bend our own tubing, machine our own flanges, design jigs, weld, port, and R\u0026amp;D right here in the USA with locally sourced raw material. So buy with confidence, know that you are getting the best product on the market for your vehicle!\u003c\/p\u003e\n\u003cp\u003eThe MAP Ecoboost Mustang intercooler is a fabricated piece of art. We created this art by deciding to set ourselves apart from all the other intercoolers on the market and go with CNC billet machined end tanks. Not only does it allow us to achieve ultimate air flow by having smooth internal contouring, but we were also able to incorporate all the necessary sensor flanges, and mounting brackets into the one piece endtanks. No need to bend up a boxy end tank, and weld on cut to fit brackets and machined flanges. Our intercooler is designed to work with the factory charge piping, so installation is a breeze! No modification required. On top of it all, it just looks plain bad-ass! So, how does it perform? See for yourself!\u003c\/p\u003e\n\u003ch3\u003eMAP Billet Intercooler Charge Air Temps\u003c\/h3\u003e\n\u003cp align=\"justify\"\u003eOriginal charge air temps with the stock intercooler would run all the way up to 130-140 degrees on a 4th gear run. With our FMIC installed it never broke 100 degree's during testing, average was 95-96 degrees with back to back pulls. Below is a graph of a 4th gear run during a long day of testing on our dyno. As demonstrate below, our intercooler efficiently and effectively lowered air intake temperatures throughout the pull.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eIf you would like to see the full R\u0026amp;D process of this intercooler, please visit our \u003ca href=\"http:\/\/www.mustang6g.com\/forums\/showthread.php?t=17592\"\u003e\u003cstrong\u003eR\u0026amp;D thread on Mustang6g.com!\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061 Billet Endtanks\u003c\/li\u003e\n\u003cli\u003e20x6x5 Core\u003c\/li\u003e\n\u003cli\u003e766CFM @ 1psi Pressure Drop | 980CFM @ 1.5psi Pressure Drop\u003c\/li\u003e\n\u003cli\u003eSupports up to 550whp\u003c\/li\u003e\n\u003cli\u003e100% Direct replacement (Works with stock piping)\u003c\/li\u003e\n\u003cli\u003eDoesn't require removal of front bumper\u003c\/li\u003e\n\u003cli\u003e-Doesn't require delete of AGS (Active Grill Shutters)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2018 Ford Mustang Ecoboost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Intercooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/EBM-IC.pdf?7328950578406841283\" rel=\"“\" target=\"_blank\" noreferrer=\"\"\u003eDownload Install Instructions Here\u003c\/a\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\n\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"MAPerformance","offers":[{"title":"Default Title","offer_id":5331112835,"sku":"MAP EBM-IC","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/maperformance-cnc-map-ebm-ic-28362967711814.jpg?v=1751889888"},{"product_id":"hks-ssqv4-for-07-09-mazdaspeed3-bov-71008-az008","title":"HKS SSQV4 for 07-09 MAZDASPEED3 BOV | 71008-AZ008","description":"\u003ch2\u003eMazdaspeed3 BOV\u003c\/h2\u003e\n\u003ceol\u003e \u003ceol\u003e\n\u003cp\u003eIn 1994, HKS introduced the first Sequential Blow-Off Valve featuring a unique, pull-type, sequential valve structure and a differential pressure control system. This advanced pull-type relief system allowed for stable operating ranges from low to high boost pressures. Since imitation is the highest form of flattery, HKS has once again redesigned the physical aspects of the Super Sequential Blow Off Valve to thwart off the counterfeiters.\u003c\/p\u003e\n\u003ceol\u003e \u003ceol\u003e\n\u003ch3\u003eAvailable with either VTA or Recirc configurations\u003c\/h3\u003e\n\u003ceol\u003e \u003ceol\u003e\n\u003cp\u003eReliable functionality of the Super SQV 4 is unchanged and utilizes the same mounting flanges as all previous generation SSQVs. This assures compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.\u003c\/p\u003e\n\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":5332460547,"sku":"HKS 71008-AZ008","price":391.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/hks-hks-71008-az008-3769328259.jpg?v=1740931955"},{"product_id":"hks-ssqv-iv-blow-off-valve-71008-ak001","title":"HKS Blow Off Valve SSQV BOV (71008-AK001)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSuper SQV4 Sequential Blow Off Valve by HKS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eHKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThis Super SQV maximizes the charge-response that repeats pressure-charging and pressurized air relief by throttle on and off and supports new generations of turbocharged vehicles.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eFactory recirculation valve sound cannot be noticed, but once HKS Super SQV IV is installed, its unique \u0026amp; sharp high frequency sound demonstrates its existence. Super SQV IV significantly increases its presence and improve the engine compartment appearance. To match with the appearance created by HKS Intercooler Piping Kit, the buff-polished casting pipe is included. By both the sound and appearance, Super SQVIV increases the fun to drive.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality Aluminum Die-Cast Body\u003c\/strong\u003e - Combines the ultimate in looks and durability in the engine compartment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Stiffness Metal Die-Cast Valve\u003c\/strong\u003e - Reliable operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Fin Design\u003c\/strong\u003e - Triple Fins set at the center of the funnel produces a dynamic and aggressive sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull-Type Relief Valve Operation\u003c\/strong\u003e - More precise relief of excess boost and is compatible for a wider range of boost pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Valve (Small)\u003c\/strong\u003e - Lift off the throttle, and the primary valve instantly opens, quickly discharging initial excess boost pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Valve (Large)\u003c\/strong\u003e - Combined with the Primary Valve to provide optimal blow-off operation from low to high boost ranges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Valve Structure, Sequential System\u003c\/strong\u003e - At low boost ranges the Primary Valve opens, and at high boost ranges the Secondary Valve also opens, resulting in linear response and optimal blow-off operation at all boost levels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Super SQV4 BOV Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":5332461187,"sku":"HKS 71008-AK001","price":292.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/hks-hks-71008-ak001-28373521334342.jpg?v=1740931954"},{"product_id":"hks-r-type-fmic-kit-subaru-sti-2008","title":"HKS R-Type FMIC Kit (Subaru STi 2008+)","description":"\u003cstyle type=\"text\/css\"\u003e \u003cEOL\u003e\u003c!-- \u003cEOL\u003ea:link {color: 0F368C;} \u003cEOL\u003e.style1 { \u003cEOL\u003e color: #FF0000; \u003cEOL\u003e font-weight: bold; \u003cEOL\u003e font-size: medium; \u003cEOL\u003e} \u003cEOL\u003e--\u003e \u003cEOL\u003e\u003c\/style\u003e \u003ceol\u003e \u003ceol\u003e\u003cdiv align=\"center\"\u003e\u003c\/div\u003e \u003ceol\u003e\u003ch3\u003eHKS R-Type FMIC Kit (Subaru STi 2008+)\u003c\/h3\u003e \u003ceol\u003e\u003cp\u003eThis HKS FMIC kit for the 2008+ Subaru STi features a large capacity, low pressure loss R-Type core and large diameter piping with a short layout to allow for quicker boost response. The end tanks are optimized to maximize cooling efficiency of the core, and the front mount layout allows for a cooler engine compartment.\u003c\/p\u003e \u003ceol\u003e\u003ch3\u003eKit Includes\u003c\/h3\u003e \u003ceol\u003e \u003cul\u003e \u003ceol\u003e  \u003cli\u003eR-Type core (600mm x 255.6mm x 103mm vs. Stock size of 170mm x 525mm x 65mm) with polished side tanks\u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e3 piece inlet pipe (polished aluminum)\u003c\/li\u003e \u003ceol\u003e  \u003cli\u003e3 piece outlet pipe (polished aluminum)\u003c\/li\u003e \u003ceol\u003e  \u003cli\u003esilicone hoses\u003c\/li\u003e \u003ceol\u003e  \u003cli\u003ebrackets and other supporting hardware\u003c\/li\u003e \u003ceol\u003e \u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/ul\u003e \u003ceol\u003e \u003ch3\u003eInstallation Notes\u003c\/h3\u003e \u003ceol\u003e \u003cul\u003e \u003ceol\u003e  \u003cli\u003eRequires front bumper modifications\u003c\/li\u003e \u003ceol\u003e \u003cli\u003eRequires \u003ca href=\"http:\/\/www.maperformance.com\/ams-subaru-wrx-sti-small-battery-kit.html\"\u003esmall B19L battery\u003c\/a\u003e\n\u003c\/li\u003e \u003ceol\u003e \u003cli\u003eStock recirculation\/bypass cannot be used (upper intercooler pipe includes flange for HKS Universal SQV)\u003c\/li\u003e \u003ceol\u003e \u003cli\u003eRequires \u003ca href=\"http:\/\/www.maperformance.com\/hks-racing-suction-intake-kit-2008-subaru-sti.html\"\u003eRacing Suction Reloaded intake kit\u003c\/a\u003e \u003c\/li\u003e \u003ceol\u003e \u003cli\u003eInstallation time estimated at 5-6 hours\u003c\/li\u003e \u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/ul\u003e \u003ceol\u003e \u003cp align=\"center\" class=\"style1\"\u003eThis kit is designed for!\u003c\/p\u003e \u003ceol\u003e \u003cdiv align=\"center\"\u003e\u003c\/div\u003e \u003ceol\u003e \u003cp\u003e \u003c\/p\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":5332471491,"sku":"HKS 13001-AF014","price":2484.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/hks-hks-13001-af014-3769336771.jpg?v=1740931951"},{"product_id":"hks-intercooler-piping-upgrade-kit-2008-mitsubishi-evolution-evo-x","title":"HKS Intercooler Piping Upgrade Kit | 2008-2015 Mitsubishi Evo X (13002-AM003)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMitsubishi Evo X Intercooler Piping Upgrade by HKS\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe stock Lancer Evolution X intercooler pipes are soft rubber hoses, prone to bending and expanding. Upgrading to aluminum piping will prevent deformation and provide superior performance. The polished aluminum piping and purple silicone hoses also provide a clean and stylish look under the hood.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePolished Aluminum Piping\u003c\/li\u003e\n\u003cli\u003ePurple Silicone Hoses\u003c\/li\u003e\n\u003cli\u003eImproved Flow \u0026amp; Performance\u003c\/li\u003e\n\u003cli\u003eSturdier Than the Stock Hoses\u003c\/li\u003e\n\u003cli\u003eClamps \u0026amp; Hardware Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler Inlet \u0026amp; Outlet Pipes\u003c\/li\u003e\n\u003cli\u003ePurple Silicone Hoses\/Couplers\u003c\/li\u003e\n\u003cli\u003eClamps \u0026amp; Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":5332483139,"sku":"HKS 13002-AM003","price":882.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/hks-hks-13002-am003-11971633283142.jpg?v=1740931935"},{"product_id":"hks-intercooler-kit-ductless-nissan-gt-r","title":"HKS Intercooler Kit Ductless (Nissan GT-R)","description":"HKS Nissan GT-R Intercooler Kit (Ductless) \u003ceol\u003e \u003ceol\u003eFitment \u003ceol\u003eï¾  2009+ \u003ceol\u003eï¾  400 x 260 x 65 Twin Cores \u003ceol\u003eï¾  Front Mount \u003ceol\u003eï¾  No Air Ducts Included \u003ceol\u003e \u003ceol\u003eFeatures \u003ceol\u003eCooling performance of the stock intercooler is good enough for the stock engine; however, it is not enough when the boost pressure is increased to 1.2k (GT570 kit or GT600 kit). With the stock intercooler, it cannot prevent sharp rise of the temperature at the turbo outlet. (These kits cause the airflow of the turbine to the upper limit so the stock I\/C core capacity is insufficient.) To improve cooling performance, core's capacity must be increased; however, our inhouse test result showed major performance improvement would not be seen even if the core size was little larger.\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":5332484867,"sku":"HKS 13001-AN014","price":3312.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/hks-hks-13001-an014-3769347843.png?v=1740931934"},{"product_id":"hks-front-mount-intercooler-type-2-2008-mitsubishi-evolution-evo-x","title":"HKS Front Mount Intercooler - Type 2 | 2008+ Mitsubishi Evo X (13001-AM006)","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"font-size: 14pt;\"\u003e \u003ceol\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003cspan style=\"font-weight: bold;\"\u003eHKS Front Mount Intercooler Type 2 2008 + Mitsubishi Lancer Evolution EVO X\u003c\/span\u003e\u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e HKS Intercooler Kits are application specific upgrade kits for factory \u003ceol\u003eintercooled turbocharged vehicles. Designed specifically for each \u003ceol\u003eapplication; intercooler width, height, thickness and placement are \u003ceol\u003ecalculated for maximum efficiency and performance. All necessary \u003ceol\u003esilicone hoses, brackets, hardware and fittings are included for a \u003ceol\u003ecomplete bolt-on installation. \u003ceol\u003e\u003cbr\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003ceol\u003eHKS Type-2 Front mount intercooler comes with Intercooler Pipes, clamps, and hoses. The complete kit. \u003ceol\u003e\u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003cbr\u003e \u003ceol\u003e \u003ceol\u003e \u003ceol\u003eSize is:\u003cbr\u003e \u003ceol\u003e  Height 525mm, Width 304MM,Thickness 103MM\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/span\u003e \u003ceol\u003e \u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\n\u003c\/div\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":5332508355,"sku":"HKS 13001-AM006","price":2682.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/hks-hks-13001-am006-22501913731.jpg?v=1740931927"},{"product_id":"hks-actuator-upgrade-nissan-gt-r","title":"HKS Actuator Upgrade (Nissan GT-R)","description":"HKS Nissan GT-R Wastegate Actuator Upgrade \u003ceol\u003e \u003ceol\u003eFitment \u003ceol\u003eï¾ 2009+\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":5332529219,"sku":"HKS 14030-AN001","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/hks-hks-14030-an001-3769377347.jpg?v=1740931923"},{"product_id":"cobb-3-port-boost-control-solenoid-2008-2015-mitsubishi-lancer-evo-x-ralliart-752750","title":"COBB 3-Port Boost Control Solenoid | 2008-2015 Mitsubishi Lancer Evo X\/Ralliart (752750)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMitsubishi Lancer Evo X\/Ralliart 3-Port BCS by COBB Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port Boost Control Solenoid is the ultimate electronic boost control device for modern turbocharged applications, designed with outstanding boost control, engineered for consistent performance and extended service life, and configured for easy installation. Get your boost under control and Access the Potential of your turbocharged Mitsubishi today!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port BCS features 1\/8\" low-profile barb fittings to keep the unit compact, and are nickel coated for corrosion resistance. Optional 1\/4\" nickel plated fittings are also available separately. Viton spools and seals are used throughout for long life and lubricated with Dow Corning silicone grease. The manual override port is sealed with an O-ring, the wiring harness is sealed to the casing using a waterproof grommet and the solenoid wires are ultrasonically welded to the coil, making the device waterproof and safe to wash.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eCOBB Tuning has made the COBB 3-Port BCS installation as simple as possible. It mounts in the stock location and plugs directly into the stock wiring harness, making the physical install and electrical connection as straightforward possible. The BCS comes with a custom aluminum mounting bracket, stainless steel hardware, the necessary boost-line to complete all connections and zip-ties to route the boost-line neatly through the engine bay. The install instructions are easy to understand, with photographs and illustrations to guide you through the installation process, and include routing instructions for both internal and external wastegate configurations.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlug and Play 18-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003e1\/8\" Nickel Plated Barbed Fittings\u003c\/li\u003e\n\u003cli\u003eRated up to 120psi of Pressure\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum BCS Mount\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTUNING REQUIRED!! Please download the appropriate Off The Shelf Map for your vehicle or contact your Protuner in order to safely utilize this part!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2015 Mitsubishi Lancer Evolution X\u003c\/li\u003e\n\u003cli\u003e2009 - 2015 Mitsubishi Lancer Ralliart\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate and Consistent Boost Control\u003c\/li\u003e\n\u003cli\u003eDurable Long Lasting Construction\u003c\/li\u003e\n\u003cli\u003eSimple Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - COBB 3-Port BCS\u003c\/li\u003e\n\u003cli\u003eNecessary Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eInstructions\/Manual\u003c\/li\u003e\n\u003cli\u003eWarranty Information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstructions\/Manuals\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobb.app.box.com\/v\/752750instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCOBB Tuning offers a 12-Month Limited Warranty, as well as a 30-Day Satisfaction Guarantee\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13400730563,"sku":"COB 752750","price":161.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-752750-28329546809414.jpg?v=1755755072"},{"product_id":"cobb-tuning-intercooler-upgrade-for-2014-ford-fiesta-st-701502","title":"COBB Tuning Intercooler Upgrade | 2014-2019 Ford Fiesta ST (702502)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2014-2019 Ford Fiesta ST Intercooler Upgrade by Cobb Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB Fiesta ST Intercooler Upgrade is the easiest way to drastically improve power when coupled with tuning from the Accessport. Even when stock, the factory FMIC can be overwhelmed with heatsoak. By using a 55% larger core, your Fiesta ST will come alive with the new found colder charge air. This upgrade requires no modification to the car for an easy installation with the included custom silicone adapters. Factory-like fitment for the 2014+ Fiesta ST.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCasted Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eSilver Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003eEmbossed COBB Logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased Cooling Capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2014-2019 Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Intercooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCobb Tuning's Standard Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13406923523,"sku":"COB 702502","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-702502-3773722307.jpg?v=1755755071"},{"product_id":"cobb-tuning-hard-pipe-kit-for-ford-fiesta-st-701550","title":"COBB Tuning Hard Pipe Kit | 2014-2019 Ford Fiesta ST (701550)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e2014-2019 Ford Fiesta ST Hard Pipe Kit by Cobb Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eReplacing the factory plastic tubing with 2.5\" mandrel bent piping, the COBB Fiesta ST Hard Pipe Kit removes restriction and improves airflow to the engine of your Fiesta ST. The COBB Fiesta ST Hard Pipe Kit consists of single piece pipes made from mandrel bent aluminum tubing on both the cold side and hot side of the intercooler. The results are weld-free pipes from the turbo outlet to intercooler inlet and from the intercooler outlet to the throttle body. COBB silicone hose couplings and heavy duty T-Bolt hose clamps finish off this kit and ensure the pipes stay put.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Fiesta ST Hard Pipe Kit allows the use of the factory or COBB intercooler core while cleaning up the engine bay and freeing up airflow to the engine.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" Mandrel Bent Aluminum Tubing\u003c\/li\u003e\n\u003cli\u003e4-Ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003ePowdercoated Wrinkle Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with Stock or COBB Intercooler\u003c\/li\u003e\n\u003cli\u003eIncreased Air Flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2014-2019 Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Hard Pipe Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCobb Tuning's Standard Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13407191299,"sku":"COB 701550","price":352.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-701550-3773724995.jpg?v=1755755070"},{"product_id":"cobb-tuning-front-mount-intercooler-kit-for-2014-2017-ford-fiesta-st-702500","title":"COBB Tuning Front Mount Intercooler Kit | 2014-2019 Ford Fiesta ST (702500)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eFord Fiesta ST Front Mount Intercooler Upgrade Kit by Cobb Tuning\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eEven when stock, the Fiesta ST factory FMIC can be overwhelmed with heatsoak. The COBB Ford Fiesta ST FMIC system is the single best bolt-on modification for the platform, allowing for much cooler boosted air temps that respond with healthy power increase when tuned with an Accessport.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eBy using a 55% larger core with streamlined piping that is a direct bolt-on solution, your Fiesta ST will come alive with charge air that's up to 100 DEGREES COOLER. Off the shelf maps are available for the Ford Fiesta ST Accessport so it's tuned right out of the box!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCustom Cast Endtanks with COBB Logo\u003c\/li\u003e\n\u003cli\u003e27.5\" x 6\" x 3\" Bar and Plate Core\u003c\/li\u003e\n\u003cli\u003eCasted Mounting Brackets\u003c\/li\u003e\n\u003cli\u003eSilver Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e2.5\" Mandrel Bent Aluminum Tubing\u003c\/li\u003e\n\u003cli\u003e4-Ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eNo Cutting or Drilling Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased cooling capacity and performance\u003c\/li\u003e\n\u003cli\u003eBig power gains (especially when paired with an accessport)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2014 - 2019 Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Intercooler Upgrade\u003c\/li\u003e\n\u003cli\u003e1 - Hard Pipe Kit\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/324698337\/702500+-+Ford+Fiesta+ST+Front+Mount+Intercooler+Kit\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13408677827,"sku":"COB 702500","price":909.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-702500-11987929727046.jpg?v=1755755070"},{"product_id":"cobb-tuning-front-mount-intercooler-v2-2013-2018-ford-focus-st-792500","title":"COBB Tuning Front Mount Intercooler V2 | 2013-2018 Ford Focus ST (792500)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eFocus ST Front Mount Intercooler V2 by COBB\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB Front Mount Intercooler (FMIC) for your Focus ST is the easiest way to drastically improve power when coupled with tuning from the Accessport. Even when stock, the factory FMIC can be overwhelmed with heatsoak. By using a 57% larger core with streamlined piping, your Focus ST will come alive with charge air thats up to 100 DEGREES COOLER. After removing the grill shutters and drilling 2 simple holes, this FMIC requires no other modification for an easy installation with the included custom silicone adapters. Off the shelf maps are available for the Ford Focus ST Accessport so it's tuned right out of the box!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCast Endtanks\u003c\/li\u003e\n\u003cli\u003e24\"x8\"x3.5\" Core\u003c\/li\u003e\n\u003cli\u003e4-ply Black Silicone Couplers\u003c\/li\u003e\n\u003cli\u003e2.5\" Mandrel Bent Aluminum Tubing\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Bumper Beam\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2013 - 2018 Ford Focus ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - Front Mount Intercooler V2\u003c\/li\u003e\n\u003cli\u003e1 - Intercooler Piping Set\u003c\/li\u003e\n\u003cli\u003eSilicone Couplers w\/ Clamps\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13408696899,"sku":"COB 792500","price":1096.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-792500-28375474929734.jpg?v=1755755068"},{"product_id":"cobb-tuning-charge-pipe-for-bmw-n55-7b2212","title":"COBB Tuning 3in Aluminum Charge Pipe | 2011-2013 BMW N55 (7B2212)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eBMW N55 Aluminum Charge Pipe by COBB Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe BMW N55 Charge Pipes have been redesigned. The charge pipes now feature a wrinkle black powder coat finish and an improved design with increased clearances making for an easier install.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB BMW Charge Pipes both increase flow and improve the reliability of your N55 BMW. The 3″ mandrel bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize airflow into the engine.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe Charge Pipes are direct factory replacements that require no tuning changes. Since it’s not uncommon for the factory Charge Pipe to fail on completely stock vehicles, no matter where you are along the upgrade path, it’s not a bad idea to consider the upgrade. An Upgraded Charge Pipe is especially crucial with increased boost pressures that come with modifications and tuning.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3\" Mandrel Bent Aluminum Tubing\u003c\/li\u003e\n\u003cli\u003eWrinkle Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e4-Ply Silicone Couplers\u003c\/li\u003e\n\u003cli\u003eReplaces Brittle OEM Plastic Charge Pipe\u003c\/li\u003e\n\u003cli\u003eFree Up Airflow and Improve Reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents: Prop 65 Warning\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2011 - 2012 BMW 135i MT\u003c\/li\u003e\n\u003cli\u003e2011 BMW 135i AT\/DCT\u003c\/li\u003e\n\u003cli\u003e2013 BMW 135is DCT\/MT\u003c\/li\u003e\n\u003cli\u003e2011 BMW 335i AT\/MT\u003c\/li\u003e\n\u003cli\u003e2011 BMW 335i xDrive AT\/MT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - 3\" Aluminum Charge Pipe\u003c\/li\u003e\n\u003cli\u003e1 - 4-Ply Silicone Coupler\u003c\/li\u003e\n\u003cli\u003e2 - Stainless Steel Clamps\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstructions\/Manuals\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobb.app.box.com\/v\/7b2210instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB 12-Month Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13409217667,"sku":"COB 7B2212","price":212.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-7b2212-28329625223238.jpg?v=1755755060"},{"product_id":"cobb-tuning-3-port-boost-control-solenoid-06-07-mazdaspeed6-and-mazdaspeed3-07-12","title":"Cobb Tuning 3-Port Boost Control Solenoid | 2006-2007 Mazdaspeed6 \u0026 2007-2013 Mazdaspeed3 (771750)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eMAZDASPEED 3-PORT BOOST CONTROL SOLENOID (BCS)\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB 3-Port Boost Solenoid is an excellent upgrade for modern turbocharged vehicles, enabling precise boost control in a tidy package that is easy to install and tune. Our BCS will eliminate boost fluctuations inherent in OEM boost control systems, providing the necessary stable and repeatable boost control required for accurate tuning and consistent performance. The COBB BCS is equally capable of providing stable boost control at stock boost levels as well as extremely high boost levels associated with big-power builds, with an operating range of up to 120psi.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port BCS features 1\/8\" low-profile barb fittings to keep the unit compact, and are nickel coated for corrosion resistance. Optional 1\/4\" nickel plated fittings are also available separately. Viton spools and seals are used throughout for long life and lubricated with Dow Corning silicone grease. The manual override port is sealed with an O-ring, the wiring harness is sealed to the casing using a waterproof grommet and the solenoid wires are ultrasonically welded to the coil, making the device waterproof and safe to wash.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eCOBB Tuning has made the COBB 3-Port BCS installation as simple as possible. It mounts in the stock location and plugs directly into the stock wiring harness, making the physical install and electrical connection as straightforward possible. The BCS comes with a custom aluminum mounting bracket, stainless steel hardware, the necessary boost-line to complete all connections and zip-ties to route the boost-line neatly through the engine bay. The install instructions are easy to understand, with photographs and illustrations to guide you through the installation process, and include routing instructions for both internal and external wastegate configurations.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port BCS is the ultimate electronic boost control device for modern turbocharged applications, designed with outstanding boost control, engineered for consistent performance and extended service life, and configured for easy installation. Get your boost under control and Access the Potential of your turbocharged MAZDASPEED today!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate and Consistent Boost Control\u003c\/li\u003e\n\u003cli\u003ePlug and Play 18-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003e1\/8\" Nickel Plated Barbed Fittings\u003c\/li\u003e\n\u003cli\u003eRated up to 120psi\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum BCS Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2013 Mazdaspeed 3\u003c\/li\u003e\n\u003cli\u003e2006-2007 Mazdaspeed 6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Boost Control Solenoid\u003c\/li\u003e\n\u003cli\u003e(1) Vacuum Hose\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13400824579,"sku":"COB 771750","price":161.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-771750-14432952549446.jpg?v=1755755053"},{"product_id":"cobb-tuning-3-port-boost-control-solenoid-04-07-subaru-wrx-and-sti","title":"Cobb Tuning 3-Port Boost Control Solenoid | 2002-2007 Subaru WRX \/ 2004-2007 STI (712750)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eSubaru WRX \/ STI \/ FXT 3-Port Boost Control Solenoid (BCS) by Cobb Tuning\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB 3-Port Boost Solenoid (BCS) is an excellent upgrade for modern turbocharged vehicles, enabling precise boost control in a tidy package that is easy to install and tune. Our BCS will eliminate boost fluctuations inherent in the OEM boost control system, providing stable and repeatable boost control to base the vehicle's tune on. It is equally capable of providing this stable boost control at stock boost levels as well as extremely high boost levels associated with big-power builds.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port BCS features 1\/8\" low-profile barb fittings to keep the unit compact and are nickel coated for corrosion resistance. Optional 1\/4\" nickel plated fittings are also available separately. Viton spools and seals are used throughout for long life and lubricated with Dow Corning silicone grease. The manual override is sealed with an O-ring, the wiring harness is sealed to the casing using a waterproof grommet and the solenoid wires are ultrasonically welded to the coil, making the device waterproof and safe to wash. The BCS is rated to operate up to 120psi.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eCOBB Tuning has made the COBB 3-Port BCS installation as simple as possible. It mounts in the stock location and plugs directly into the stock wiring harness, making the physical install and electrical connection as simple as possible. The BCS comes with a custom aluminum mounting bracket, stainless steel hardware, boost-line to complete all connections and zip-ties to route the boost-line neatly through the engine bay. Installation Instructions are provided, are easy to understand, and provide routing instructions for both internal and external wastegate configurations.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eThe COBB Tuning 3-Port BCS is engineered to be the ultimate electronic boost control device for modern turbocharged applications, designed with outstanding boost control, engineered for consistent performance and extended service life and configured for easy installation. Get your boost under control and Access the Potential of your turbocharged Subaru today!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cstrong\u003eTUNING REQUIRED!! Please download the appropriate \u003ca href=\"http:\/\/www.cobbtuning.com\/maps\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOff The Shelf Map \u003c\/a\u003efor your vehicle or contact your Protuner in order to safely utilize this part!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cli\u003eCARB EO: \u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/56819754\/712750+715750-COBB+3-PORT+ELECTRONIC+BOOST+CONTROL+SOLENOID?moved=true\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eD-660-261\u003c\/a\u003e\n\u003c\/li\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate and Consistent Boost Control\u003c\/li\u003e\n\u003cli\u003ePlug and Play 18-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003e1\/8\" Nickel Plated Barbed Fittings\u003c\/li\u003e\n\u003cli\u003eRated up to 120psi\u003c\/li\u003e\n\u003cli\u003eCustom Aluminum BCS Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2007 Subaru WRX\u003c\/li\u003e\n\u003cli\u003e2004-2007 Subaru STI\u003c\/li\u003e\n\u003cli\u003e2004-2008 Subaru Forester XT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoost Control Solenoid\u003c\/li\u003e\n\u003cli\u003eTubing\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/56819754\/712750+715750-COBB+3-PORT+ELECTRONIC+BOOST+CONTROL+SOLENOID?moved=true\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13400826243,"sku":"COB 712750","price":161.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-712750-12031029116998.jpg?v=1755755050"},{"product_id":"cobb-td05h-20g-8-turbocharger-400hp-2008-2018-subaru-sti-e1120g","title":"COBB TD05H-20G-8 Turbocharger - 400HP | 2008-2020 Subaru STI (E1120G)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eTD05H-20G 400HP Turbocharger for 2008+ Subaru STi by COBB\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe COBB TD05H-20G is an ideal turbo upgrade for those looking to increase the top-end power of their STI while maintaining low and mid-range response. Capable of producing 400hp and retaining excellent throttle response, the COBB 20G is a perfect turbocharger for street or track use!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Scroll exhaust housing\u003c\/li\u003e\n\u003cli\u003eOffset compressor outlet for more room around the throttle by wire connector\u003c\/li\u003e\n\u003cli\u003eSleeve bearing turbo with 360 degree thrust bearings with modified oiling strategy for greater thrust capacity\u003c\/li\u003e\n\u003cli\u003eCompressor: 52.5mm Inducer and 68mm Exducer\u003c\/li\u003e\n\u003cli\u003eTurbine: 55.8mm Inducer and 49.2mm Exducer\u003c\/li\u003e\n\u003cli\u003e20G Compressor Housing with 68mm Billet Wheel\u003c\/li\u003e\n\u003cli\u003e8cm^2 Turbine Housing with 55.8mm Wheel (TD05H)\u003c\/li\u003e\n\u003cli\u003e640 CFM\u003c\/li\u003e\n\u003cli\u003e0.57 A\/R\u003c\/li\u003e\n\u003cli\u003e1Bar Actuator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008 - 2020 Subaru STI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - COBB TD05H-20G Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB 1-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":13409756739,"sku":"COB E1120G","price":1249.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/cobb-tuning-cob-e1120g-11988035764294.jpg?v=1755755046"},{"product_id":"blox-racing-wastegate-flange-tial-deltagate-38mm-through-hole-bxfl-00102","title":"BLOX Racing Wastegate Flange (TiAL\/Deltagate) 38mm Through Hole (BXFL-00102)","description":"\u003cdiv id=\"newdescr\"\u003e\u003ceol\u003e\n\u003cdiv\u003e\u003ceol\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\u003ceol\u003e \u003ceol\u003e\n\u003cp align=\"justify\"\u003eBLOX Racing offers a full line of DIY performance parts. The Performance DIY line is perfect for building and assembling your own high performance component and products.\u003c\/p\u003e\n\u003ceol\u003e \u003ceol\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003ceol\u003e\n\u003cul\u003e\u003ceol\u003e\n\u003cli\u003eWastegate flanges are CNC-machined from 1018 mild steel\u003c\/li\u003e\n\u003ceol\u003e\n\u003cli\u003eAvailable for 38mm TiAL or Deltagate brands\u003c\/li\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/ul\u003e\n\u003ceol\u003e \u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/div\u003e\n\u003ceol\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\u003ceol\u003e \u003ceol\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003ceol\u003e\n\u003cul\u003e\u003ceol\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/ul\u003e\n\u003ceol\u003e \u003ceol\u003e\n\u003ch3\u003eWhat's in the Box?\u003c\/h3\u003e\n\u003ceol\u003e\n\u003cul\u003e\u003ceol\u003e\n\u003cli\u003e38mm Wastegate Flange\u003c\/li\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/ul\u003e\n\u003ceol\u003e \u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/div\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/div\u003e\n\u003ceol\u003e\u003c\/eol\u003e\u003c\/eol\u003e\u003c\/div\u003e\n\u003ceol\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e\n\u003c\/eol\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":5342998275,"sku":"BLO BXFL-00102","price":10.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/blox-racing-blo-bxfl-00102-11968609189958.jpg?v=1751400944"},{"product_id":"ams-upper-intercooler-pipe-hot-pipe-mitsubishi-evo-x-ams-04-09-0002-1","title":"AMS Upper Intercooler Pipe \/ Hot Pipe | 2008-2015 Mitsubishi Evo X (AMS.04.09.0002-1)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eAMS Mitsubishi Lancer Evolution X Upper Intercooler Pipe \/ Hot Pipe *Polished*\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AMS EVO X Upper Intercooler Pipe (UICP) is a direct replacement for your factory upper intercooler pipe. Made from lightweight 2.5\" mandrel bent aluminum tubing this pipe includes features such as a smooth, non-turbulent 2\" - 2.5\" transition for maximum performance. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicone pieces which can endure 50 + psi of boost! We also utilize a silicone “hump hose\" to prevent torn couplers caused by engine movement. Our UICP is professionally TIG welded in house by our master fabricators and is available polished or black wrinkle powder coated. By simply installing this Upper Intercooler Pipe you can expect to see 5 awhp peak and 10+ awhp gains in the midrange over stock without even re-tuning the ECU!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessionally TIG welded\u003c\/li\u003e\n\u003cli\u003eCNC AMS badge\u003c\/li\u003e\n\u003cli\u003eBead rolled pipe ends\u003c\/li\u003e\n\u003cli\u003eFactory style core support strap\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone couplers and new hose clamps\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone ”hump hose” coupler to allow engine movement\u003c\/li\u003e\n\u003cli\u003e2.5\" aluminum mandrel bent piping\u003c\/li\u003e\n\u003cli\u003eSmooth 2 - 2.5\" transition for unmatched air flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003cbr\u003eUSDM, JDM and EDM compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 6061 mandrel bent aluminum piping\u003c\/li\u003e\n\u003cli\u003e(3) ply silicone couplers and transition hoses\u003c\/li\u003e\n\u003cli\u003e(6) T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eDetailed installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/bsk-pdf-manager\/amsevo10uicpinstructions_43.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":5343817219,"sku":"AMS AMS.04.09.0002-1","price":305.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/ams-performance-ams-ams-04-09-0002-1-11980654608454.jpg?v=1756793139"},{"product_id":"ams-remote-oil-pressure-sending-unit-line-ams-01-04-0104-1","title":"AMS Remote Oil Pressure Sending Unit Line | 1990-1999 Mitsubishi Eclipse\/Eagle Talon\/Plymouth Laser and 1992-2015 Mitsubishi Evo X (AMS.01.04.0104-1)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e1990-1999 Mitsubishi Eclipse\/Eagle Talon\/Plymouth Laser and 1992-2015 Mitsubishi Evo X Remote Oil Pressure Sending Line by AMS Performance\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AMS Remote Oil Pressure Sending Unit Line allows you to safely mount your aftermarket oil pressure sending unit away from vibration. Traditionally tuners would mount their oil pressure sending units directly to the oil filter housing which provides a quick and easy mounting solution. The down fall is the excessive vibration especially at high RPM's can cause a failed or broken sensor. If the sender breaks, a rapid oil leak can quickly ruin bearings causing engine failure!\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOur -3AN stainless steel braided line prolongs oil pressure sending unit life, looks great and is built to last. This line is a MUST when installing an aftermarket oil pressure gauge.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for longer sending unit life\u003c\/li\u003e\n\u003cli\u003eEliminates the chance of engine damage from a sending unit breaking off\u003c\/li\u003e\n\u003cli\u003eBraided stainless steel for protection against abrasion and corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1990-1999 Mitsubishi Eclipse\/Eagle Talon\/Plymouth Laser\u003c\/li\u003e\n\u003cli\u003e1992-2015 Mitsubishi Evo X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12'' long -3AN Stainless Steel line\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT female end fits most aftermarket oil pressure sending units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 Month \/ 12,000 Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":5343842435,"sku":"AMS AMS.01.04.0104-1","price":53.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/ams-performance-ams-ams-01-04-0104-1-3968348547.jpg?v=1756793135"},{"product_id":"ams-black-upper-intercooler-pipe-hot-pipe-mitsubishi-evo-x-ams-04-09-0002-2","title":"AMS Black Upper Intercooler Pipe \/ Hot Pipe | 2008-2015 Mitsubishi Evo X (AMS.04.09.0002-2)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eAMS Mitsubishi Lancer Evolution X Upper Intercooler Pipe \/ Hot Pipe *Black*\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AMS EVO X Upper Intercooler Pipe (UICP) is a direct replacement for your factory upper intercooler pipe. Made from lightweight 2.5” mandrel bent aluminum tubing this pipe includes features such as a smooth, non-turbulent 2” – 2.5” transition for maximum performance. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicone pieces which can endure 50 + psi of boost! We also utilize a silicone “hump hose” to prevent torn couplers caused by engine movement. Our UICP is professionally TIG welded in house by our master fabricators and is available polished or black wrinkle powder coated. By simply installing this Upper Intercooler Pipe you can expect to see 5 awhp peak and 10+ awhp gains in the midrange over stock without even re-tuning the ECU!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessionally TIG welded\u003c\/li\u003e\n\u003cli\u003eBead rolled pipe ends\u003c\/li\u003e\n\u003cli\u003eFactory style core support strap\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone couplers and new hose clamps\u003c\/li\u003e\n\u003cli\u003e4 Ply silicone ”hump hose” coupler to allow engine movement\u003c\/li\u003e\n\u003cli\u003eBlack wrinkle powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5” aluminum mandrel bent piping\u003c\/li\u003e\n\u003cli\u003eSmooth silicone 2 – 2.5” transition for unmatched air flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2008-2015 Mitsubishi Evo X\u003cbr\u003e\u003cbr\u003eFits all USDM, JDM and European Models\u003cbr\u003eFits all aftermarket intercoolers with factory outlet angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Pipes\u003c\/li\u003e\n\u003cli\u003e(3) Silicone Hoses\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.amsperformance.com\/wp-content\/uploads\/bsk-pdf-manager\/amsevo10uicpinstructions_43.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":5343903683,"sku":"AMS AMS.04.09.0002-2","price":346.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/ams-performance-ams-ams-04-09-0002-2-12687065907270.jpg?v=1756793131"},{"product_id":"aem-water-methanol-injection-filter-30-3003","title":"AEM Water\/Methanol Injection Filter (30-3003)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eAEM Water\/Methanol Injection Filter\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eThe AEM Water\/Methanol Injection Filter is an in-line filter that uses a micronic mesh screen to filter particulates as small as 40 microns. This allows a cleaner flow of water\/methanol to be passed into the engine, not only protecting the internals of the engine itself, but also the working parts of the water\/methanol pump, too. Run the AEM Water\/Methanol Injection Filter in-line before the pump to protect both pump and engine.\u003c\/p\u003e\n\u003ch3 align=\"justify\"\u003eWhy You Want One\u003c\/h3\u003e\n\u003cp align=\"justify\"\u003eIf you are using a Water\/Methanol Injection System it may greatly increase pump life to use a water\/methanol filter. The AEM Water\/Methanol Injection Filter prevents foreign particles as small as 40 microns from clogging or damaging pumps, injection nozzles check valves or flow sensors. The AEM Water\/Methanol Injection Filter uses fittings for use with 1\/4\" OD nylon tubing, so it fits most Water\/Methanol injection kits on the market today!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimple to install, takes less than a minute.\u003c\/li\u003e\n\u003cli\u003eFits virtually every Water\/Methanol system on the market.\u003c\/li\u003e\n\u003cli\u003ePolypropylene housing - rugged material that is compatible with high concentrations of methanol.\u003c\/li\u003e\n\u003cli\u003eCompletely Serviceable Assembly - can be disassembled, cleaned and reused for a long service life.\u003c\/li\u003e\n\u003cli\u003eStainless Steel mesh strainer - AEMs custom mesh strainer filters down to 40 microns - MUCH smaller than similar filters.\u003c\/li\u003e\n\u003cli\u003eLarge Filtering Area assure long service life and does not significantly reduce flow.\u003c\/li\u003e\n\u003cli\u003eMicronic Mesh Screen out-performs sintered filters in both filtering and serviceability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Filter Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer One Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/files\/instructions\/30-3003%20Water%20Methanol%20Injection%20Inline%20Filter.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ceol\u003e\u003ceol\u003e\u003ceol\u003e \u003c\/eol\u003e\u003c\/eol\u003e\u003c\/eol\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5344645443,"sku":"AEM 30-3003","price":46.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/c4235ad204b30a8dd8c19178cd262f71151dbf55.webp?v=1753466899"},{"product_id":"aem-v2-water-methanol-injection-kit-multi-input-no-tank-30-3352","title":"AEM V3 Water\/Methanol Injection Kit Multi Input (No Tank) (30-3352)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cp align=\"justify\"\u003eWater\/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing without using high-octane racing fuel for power gains of up to 20%. AEMs Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOur breakthrough injector design uses unique Swirl Generator Technology that improves atomization to deliver faster inlet temp cooling and uses less fluid to maintain inlet air cooling. We include three Swirl Generators that deliver 250cc, 500cc, and 1000cc of flow. The AEM V3 WMI injector is included in every AEM Water\/Methanol injection kit and is a direct replacement\/upgrade for the V2 injector in older systems. In testing at AEM, the new V3 250cc WMI nozzle and the V2 250cc WMI nozzle both achieved a 90-degree inlet temp reduction; however, the V3 nozzle design achieved this reduction nearly 6.5 seconds faster. Consider that on an average sportsman drag car this can represent close to 40% of track time. On a road race car, applying more timing 6.5 seconds faster can mean a critical time to pass on a corner exit.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cspan\u003eWe then tested a V3 250cc injector against a V2 500cc injector to see if the larger V2 injector would improve cooling speed. The V2 500cc injector achieved nearly identical cooling speed as the V3 250cc injector, but it required almost 44% more fluid to achieve the same cooling. Less fluid used means fewer refills of your WMI tank and less money spent refilling it. Using the V2 500cc nozzle with a one-gallon tank, you will get close to 7 minutes and 50 seconds of run time at full pressure. Using the V3 250cc nozzle with a one-gallon tank, you will get 13 minutes and 30 seconds of run time at full pressure.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust, Easy to Use Controllers\u003c\/strong\u003e\u003cbr\u003eThe new controller designs (Boost Dependent Kit PN 30-3300 \u0026amp; Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplified Wiring\u003cbr\u003e\u003c\/strong\u003eAEMs Water\/Methanol Injection kits wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on\/off solenoid to stop fluid flow when the system is inactive.\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eIntegrated Boost Safe Feature\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cp\u003eThe controllers in AEMs Water Methanol systems include an integrated Boost Safe output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, Boost Safe can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water\/Methanol Injection Systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eHeavy-Duty High Pressure Injection Pump\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cp\u003eAEMs internally-bypassed water\/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003eMachined Billet Injectors and Nozzles\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cp\u003eAEM includes one precision-machined billet injector in its gasoline Water\/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water\/methanol flow to an engines horsepower output. Click the link for a \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/files\/AEM_Water_Methanol_Nozzle_Flow_Guide.pdf?4193513121253323809\" target=\"_blank\"\u003e\u003cspan\u003eNozzle Flow Guide graph.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"line-height: 1.5;\"\u003eRevised Flow Control Strategy for More Linear Fluid Delivery\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAEMs engineers spent extensive time revamping the controllers flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engines need for water\/methanol injection, which further optimizes charge air cooling and detonation control.\u003c\/p\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eV3 Water\/Methanol Nozzle and Controller Kit\u003c\/li\u003e\n\u003cli\u003eMulti Input Controller - 0-5v\/MAF Frequency or Voltage\/Duty Cycle\/Ext MAP\u003c\/li\u003e\n\u003cli\u003e200psi WM Pump\u003c\/li\u003e\n\u003cli\u003eConductive Fluid Level Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5344647811,"sku":"AEM 30-3352","price":466.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-3352-3808225411.jpg?v=1753466897"},{"product_id":"aem-v2-1-gallon-water-methanol-injection-kit-multi-input-30-3350","title":"AEM V3 1 Gallon Water\/Methanol Injection Kit Multi Input (30-3350)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eWater\/Methanol Multi Input Injection Kit for MAF, MAP, 0-5V or IDC\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eRacers with high compression naturally aspirated engines or boosted engines who are looking for an alternative to boost dependent water\/methanol injection controllers have a solution in AEM's Multi-Input WMI controller. The multiple input design enables users to install AEM’s Water\/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF\/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWater\/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high compression naturally aspirated (NA) race engines. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eOur breakthrough injector design uses unique Swirl Generator Technology that improves atomization to deliver faster inlet temp cooling and uses less fluid to maintain inlet air cooling. We include three Swirl Generators that deliver 250cc, 500cc, and 1000cc of flow. In testing at AEM, the new V3 250cc WMI nozzle and the V2 250cc WMI nozzle both achieved a 90-degree inlet temp reduction; however, the V3 nozzle design achieved this reduction nearly 6.5 seconds faster. Consider that on an average sportsman drag car this can represent close to 40% of track time. On a road race car, applying more timing 6.5 seconds faster can mean a critical time to pass on a corner exit.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eWe then tested a V3 250cc injector against a V2 500cc injector to see if the larger V2 injector would improve cooling speed. The V2 500cc injector achieved nearly identical cooling speed as the V3 250cc injector, but it required almost 44% more fluid to achieve the same cooling. Less fluid used means fewer refills of your WMI tank and less money spent refilling it. Using the V2 500cc nozzle with a one-gallon tank, you will get close to 7 minutes and 50 seconds of run time at full pressure. Using the V3 250cc nozzle with a one-gallon tank, you will get 13 minutes and 30 seconds of run time at full pressure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRobust, Easy to Use Controller Designs\u003c\/li\u003e\n\u003cli\u003eSimplified Wiring\u003c\/li\u003e\n\u003cli\u003eIntegrated Boost Safe Feature\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty High Pressure Injection Pump\u003c\/li\u003e\n\u003cli\u003eMachined Billet Injectors and Nozzles\u003c\/li\u003e\n\u003cli\u003eRevised Flow Control Strategy for More Linear Fluid Delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces Air Inlet Charge Temps\u003c\/li\u003e\n\u003cli\u003eReduces Detonation (Knock)\u003c\/li\u003e\n\u003cli\u003eReduces Carbon Deposits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne Gallon Tank\/Reservoir\u003c\/li\u003e\n\u003cli\u003eMulti-Input Controller\u003c\/li\u003e\n\u003cli\u003eMachined Billet Injector\u003c\/li\u003e\n\u003cli\u003ePump\u003c\/li\u003e\n\u003cli\u003eWiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemelectronics.com\/files\/instructions\/30-3350-Water-Methanol-Injection-Kit-V2-Multi-Input-Controller-1%20GAL%20Tank.pdf\" target=\"_blank\"\u003eInstruction Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Standard Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5344648323,"sku":"AEM 30-3350","price":525.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-3350-28329259401286.jpg?v=1753466895"},{"product_id":"aem-water-methanol-recirculation-pump-200psi-30-3015","title":"AEM Water\/Methanol Recirculation Pump - 200psi (30-3015\/30-3018)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003e200psi Recirculation Style Pump by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eAEM's recirculation-style pump offers improved performance, reliability and a much smoother, quieter operation when compared to older switched-style pumps. With the use of a new internal bypass design, AEM's upgraded pump eliminates the erratic on and off switching\/pulsing and ensures consistent fluid delivery for optimum performance. With durability and reliability in mind, AEM has designed the pump with a Santoprene diaphragm and EPDM seals to withstand the harshest of alcohol mixes.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth and Quiet Operation\u003c\/li\u003e\n\u003cli\u003eNew Internal Bypass Design\u003c\/li\u003e\n\u003cli\u003eEliminates Erratic Switching\/Pulsing\u003c\/li\u003e\n\u003cli\u003eConsistent Fluid Delivery for Optimum Peformance\u003c\/li\u003e\n\u003cli\u003eSantoprene Diaphragm and EPDM Seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor competition use only. Not to be used on public roads or highways.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAEM Water\/Methanol Injection Systems are chemically compatible with a mixture of water and methanol, which we strongly recommend does not exceed a concentration of more than 50% methanol. In addition to inherent dangers of using 100% methanol, doing so will damage the system's flow sensor and void the warranty on this component.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 - AEM Recirculation W\/M Pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Do Not Include Optional Fittings","offer_id":5344663747,"sku":"AEM 30-3015","price":186.95,"currency_code":"USD","in_stock":true},{"title":"Include 3\/8\" NPT Fittings","offer_id":29439259803718,"sku":"AEM 30-3018","price":206.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-11986798510150.jpg?v=1753466874"},{"product_id":"aem-boost-solenoid","title":"AEM Boost Control Solenoid (30-2400)","description":"\u003cdiv id=\"newdescr\"\u003e\n\u003cdiv id=\"newdescrRC\"\u003e\n\u003ch2\u003eBoost Control Solenoid by AEM\u003c\/h2\u003e\n\u003cp align=\"justify\"\u003eAEM's Boost Control Solenoid is specifically manufactured for automotive applications. It is designed to resist corrosion and sticking from exposure to rich fuel mixtures. AEM's Boost Control Solenoid is pressure tested to 100 PSI and includes 1\/8\" NPT to 3\/16\" Barb fittings to reduce any chance of leaks.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e Pressure tested to 100 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"newdescrLC\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's In The Box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoost Control Solenoid\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8\" NPT to 3\/16\" Barb Adapters\u003c\/li\u003e\n\u003cli\u003eMuffler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReferences\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.aemelectronics.com\/files\/instructions\/30-2400%20Boost%20Control%20Solenoid%20Kit.pdf\" target=\"_blank\"\u003eInstallation Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer 12 Month Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":5388472195,"sku":"AEM 30-2400","price":129.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/aem-electronics-aem-30-2400-11989401206854.jpg?v=1753466859"},{"product_id":"2013-dodge-dart-1-4l-t-polished-intercooler-piping-by-injen-ses5040icp","title":"2013 Dodge Dart 1.4L (t) Polished Intercooler Piping by Injen (SES5040ICP)","description":"\u003cdiv style=\"text-align: justify;\"\u003e\n\u003ch2\u003eInjen Intercooler Piping Kits:\u003c\/h2\u003e\n\u003cp\u003eInjen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":5389770691,"sku":"INJ SES5040ICP","price":298.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/injen-inj-ses5040icp-3809203523.jpg?v=1754024624"},{"product_id":"2013-dodge-dart-1-4l-t-black-intercooler-piping-by-injen-ses5040icpblk","title":"2013 Dodge Dart 1.4L (t) Black Intercooler Piping by Injen (SES5040ICPBLK)","description":"\u003cdiv style=\"text-align: justify;\"\u003e\n\u003ch2\u003eInjen Intercooler Piping Kits:\u003c\/h2\u003e\n\u003cp\u003eInjen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":5389775363,"sku":"INJ SES5040ICPBLK","price":298.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/injen-inj-ses5040icpblk-3809205379.jpg?v=1754024623"},{"product_id":"2011-2014-nissan-juke-1-6l-turbo-4-cyl-black-upper-intercooler-pipe-kit-by-injen-ses1900icp-blk","title":"2011-2014 Nissan Juke 1.6L Turbo 4 cyl Black Upper Intercooler Pipe Kit by Injen (SES1900ICP BLK)","description":"\u003cdiv style=\"text-align: justify;\"\u003e\n\u003ch2\u003eInjen Intercooler Piping Kits:\u003c\/h2\u003e\n\u003cp\u003eInjen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":5390198403,"sku":"INJ SES1900ICPBLK","price":456.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/injen-inj-ses1900icp-blk-3809475139.jpg?v=1754024585"},{"product_id":"2008-2009-cobalt-ss-turbochared-2-0l-polished-intercooler-piping-kit-by-injen-ses7027icp","title":"2008-2009 Cobalt SS Turbochared 2.0L Polished Intercooler Piping Kit by Injen (SES7027ICP)","description":"\u003cdiv style=\"text-align: justify;\"\u003e\n\u003ch2\u003eInjen Intercooler Piping Kits:\u003c\/h2\u003e\n\u003cp\u003eInjen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":5391695363,"sku":"INJ SES7027ICP","price":247.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/injen-inj-ses7027icp-3810499523.jpg?v=1754024533"},{"product_id":"2003-2006-mitsubishi-evo-8-9-mr-intercooler-pipe-kit-will-not-work-w-factory-air-box-by-injen-ses1898icp","title":"2003-2006 Mitsubishi Evo 8\/9\/MR Intercooler Pipe Kit (Will Not Work w\/ Factory Air Box) by Injen (SES1898ICP)","description":"\u003cdiv style=\"text-align: justify;\"\u003e\n\u003ch2\u003eInjen Intercooler Piping Kits:\u003c\/h2\u003e\n\u003cp\u003eInjen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":5591206723,"sku":"INJ SES1898ICP","price":374.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/injen-inj-ses1898icp-13641688645702.jpg?v=1754024350"},{"product_id":"2008-2009-cobalt-ss-turbochared-2-0l-black-intercooler-piping-kit-by-injen-ses7027icpblk","title":"2008-2009 Cobalt SS Turbochared 2.0L Black Intercooler Piping Kit by Injen (SES7027ICPBLK)","description":"\u003cdiv style=\"text-align: justify;\"\u003e\n\u003ch2\u003eInjen Intercooler Piping Kits:\u003c\/h2\u003e\n\u003cp\u003eInjen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":5591311427,"sku":"INJ SES7027ICPBLK","price":247.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6136\/products\/injen-inj-ses7027icpblk-11981334085702.jpg?v=1754024343"}],"url":"https:\/\/www.maperformance.com\/collections\/black-friday-boost-intercooler-deals\/in-stock.oembed?page=21","provider":"MAPerformance","version":"1.0","type":"link"}