Performance Auto Parts & Car Accessories | Unbeatable Prices Your One Stop Shop For Performance Auto Parts

Choose Your Car 
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)
  • https://youtu.be/HkPFZWd8wj4
  • AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map (30-3300)

    MAP price match guarantee Unbeatable Price Guarantee

    AEM Electronics

    AEM V2 Water / Methanol Injection System w/ 1 Gallon Tank - Internal Map

    PART# AEM 30-3300
    We Price Match!

    Contact us to ensure you're getting the right part for your car at the absolute best pricing on earth!

    Email - sales@maperformance.com
    Phone 1(888)627-3736



    $ 465.89   $ 517.65
    You Save 10% ($ 51.76)


      +1-888-627-3736
    Free delivery by , to your door when ordered within hrs and mins
    Fits Your
    MAP Loyalty: Earn $ 9.32 Toward Next Purchase!

    Water/Methanol Injection Kit for Forced Induction Gasoline Engines

    Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.

    This kit is boost dependent for forced induction vehicles up to 35 PSI of boost. The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.

    NOTE: Note: FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND GAUGES SHOULD BE RUN WITH AN AEM INLINE FILTER (AEM PART #30-3003)

    Features

    • Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
    • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid
    • “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)
    • Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable
    • Precision-machined billet-aluminum injector with integral check valve
    • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
    • 1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)
    • 20 feet of injection tubing included
    • LED dash light for system status and low fluid warning

    Benefits

    • Reduces Air Inlet Charge Temps
    • Reduces Detonation (Knock)
    • Reduces Carbon Deposits

    Applications

    • Universal

    What's In The Box?

    • Controller
    • Wiring Harness
    • 1.15 Gallon Tank
    • Pump
    • Billet Injector Nozzle

    References

    Warranty

    Water/Methanol Injection Kit for Forced Induction Gasoline Engines

    Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.

    This kit is boost dependent for forced induction vehicles up to 35 PSI of boost. The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.

    NOTE: Note: FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND GAUGES SHOULD BE RUN WITH AN AEM INLINE FILTER (AEM PART #30-3003)

    Features

    • Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
    • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid
    • “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)
    • Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable
    • Precision-machined billet-aluminum injector with integral check valve
    • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
    • 1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)
    • 20 feet of injection tubing included
    • LED dash light for system status and low fluid warning

    Benefits

    • Reduces Air Inlet Charge Temps
    • Reduces Detonation (Knock)
    • Reduces Carbon Deposits

    Applications

    • Universal

    What's In The Box?

    • Controller
    • Wiring Harness
    • 1.15 Gallon Tank
    • Pump
    • Billet Injector Nozzle

    References

    Warranty

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    D.
    My car is now a Meth Addict
    L
    L.R.
    great product

    MAP Limited Lifetime Warranty

    1.) All MAPerformance in-house fabricated parts include a Limited Lifetime Warranty for the Original Purchaser. This warranty only applies to the original purchaser and is non-transferrable. If the product fails it would need to be determined by MAPerformance that it is due to manufacturing defects in materials or workmanship.

    2.) This does not cover normal wear and tear. Improper use, modification, or abuse voids this warranty. MAPerformance will not be held responsible for additional costs due to the failure of a product (cost of sale, towing, labor, etc.). Warranty claims must be submitted to MAPerformance for review.

    3.) You must create a support ticket to acquire your return authorization number prior to returning the product.

    4.) Warranty claims will not be honored if the product was not purchased through an approved dealer.

    For warranty evaluation please create a support ticket via this form here.

    We use cookies to offer a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Please review our privacy policy & cookies information page.  If you continue you consent to our privacy policy & use of cookies.Accept

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia or the UK. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within Australia. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within your country. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately due to vendor restrictions we are unable to sell this brand within California. If you have any questions, feel like you received this message in error or would like suggestions on other brands please contact us here.

    Hello!

    Unfortunately we are not able to ship this item outside of the United States.
    If you have any questions please contact us at: 1-888-627-3736 or Email Us Here.