Performance Auto Parts & Car Accessories | Unbeatable Prices Your One Stop Shop For Performance Auto Parts

Choose Your Car 

New From COBB Tuning - The LF Bypass Valve!

Matthew Rogers  March 11 2019

LF BPV

Now Available From COBB Tuning - The LF Bypass Valve

The bypass valve is a straightforward component that can be found in most turbocharged engines. Its purpose is to relieve boost pressure in the intake tract when the throttle blade closes. This is done to decrease wear on turbo and engine parts. While this is a fairly simple task, leaks or inconsistencies in the operation of the bypass valve can occur. These occurrences will diminish a car’s performance.

With that in mind, the COBB LF Bypass Valve (BPV) is a new revision with some key feature updates that ensure leak free, optimal operation through even the highest of boost pressures.

Piston Seal Comparison

The LF BPV features a piston o-ring seal that is twice the diameter of the old XLE design allowing more seal compression and reduced wear. Not only is this the best safeguard against leaks, but in the unlikely event of an o-ring failure, o-ring sealing allows the unit to be easily rebuilt. Adjustability of spring seat is no longer needed due to the updated spring and seal design which provides a 60% increase in clamping force at peak boost while maintaining similar operation at idle and transient loads.

Port Comparison

The Subaru nose has also been redesigned to tuck tighter to the valve for easier installation. Vacuum line routing has also been improved. This updated design uses a banjo-fitting vacuum port which provides 360 degree adjustability of hose routing. This results in a simpler install and less potential leak points than the NPT ports used by the XLE unit.

Control Volume Comparison

The new revision also reduces control volume by 30% allowing for extremely fast venting of boost when actuated.

Even the smallest inconsistency in the piston or mating surface can result in a leak. This is why the COBB LF BPV is fully constructed with billet aluminum. This process yields stronger parts that are made with a higher degree of precision than traditional cast methods. The COBB LF BPV is still hard anodized and teflon coated which provides low sliding friction, reduces surface wear, and minimizes maintenance requirements.

Like the previous XLE BPV, this revision does not have the 50/50 block off plate which allowed for air to be vented. This prevents rich fueling conditions for cars that are not properly equipped to vent air to the atmosphere. Vehicles properly equipped with a speed density tuning strategy can simply remove the re-circulation hose making a fully vented to atmosphere blow-off valve.

Supported Applications

  • Subaru WRX (02-07) / STI (04-19) / FXT (06-08) - Click Here
  • Subaru WRX (15-19) / FXT (14-18) - Click Here
  • Subaru WRX (08-14) / FXT (09-13) / LGT (05-09) - Click Here
  • Mazda Mazdaspeed3 (07-13) / Mazdaspeed6 (06-07) - Click Here
  • Mitsubishi Evo X (08-15) / Lancer Ralliart (09-15) - Click Here
  • Nissan GT-R R35 (09-18)- Click Here
  • Universal LF Bypass Valve - Click Here

Click Here to See COBB's Full Line of LF Bypass Valves

Click Here to Browse Other Offerings From COBB Tuning

 

More Posts

0 comments

Leave a comment

All blog comments are checked prior to publishing

We use cookies to offer a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Please review our privacy policy & cookies information page.  If you continue you consent to our privacy policy & use of cookies.Accept