MAP Individual Port Head | 2015+ Ford Ecoboost Mustang
Posted on 30 September 2016
Ecoboost Mustang Individual Port Cylinder Head
If you're wanting to bring you Ecoboost Mustang to the next level this is the head swap for you!
The stock head has the exhaust manifold cast into it to save cost resulting in sacrificed air flow. Ecoboosts over 550whp would benefit from this head with improved air flow, getting you to the next level! We highly recommend adding race porting, bigger exhaust valves and seats to maximize this head's potential.
Most of the Ecoboost's stock parts will fit on this head: cams, camgears, front cover, intake, water housing, direct injection, injectors, fuel rail, fuel pump, and valve cover.
What's Included With Service
- Plugging and welding on the deck to fit onto an ebm block
- Moderation to the fuel pump housing so you are able to run your EBM high pressure fuel pump
- Disassembly, reassembly heating head before welding,decking, shim cam bucket
- We also can add race porting with bigger exhaust valves and seats
Please Note: Will NOT fit is your oem cam phazer solenoids, turbo or aftermarket turbo kits made for the stock head (you can buy our turbo kit or will have to make one) And you no longer use your exhaust coolant temp sensor(the sensor that screws in to the head right above your exhaust out let on the stock head)!