2015 Subaru WRX EBCS Pro - Electronic Boost Control Solenoid
Posted on 05 February 2015
2015 Subaru WRX EBCS Pro by Perrin[caption id="attachment_12485" align="aligncenter" width="300"] Click image above to BUY NOW![/caption]
The Perrin High-Flow Fuel rails are designed to deliver large amounts of fuel equally to each cylinder. Consumers running big horsepower that require large injectors will notice the car runs smoother and is more powerful and tuners can safely push the engine closer to the edge.
Aluminum & Nickel Plated Brass Construction Main valve body of the EBCS pro is made of corrosion resistant nickel plated brass, with proper seals to withstand the temps and oils see in a boost control system. The body of the EBCS Pro is made of 6061 aluminum then anodized to ensure it stays looking good forever. These things allow the EBCS Pro to easily survive under hood temps.
Direct Plug & Play, Car Specific The PERRIN male OEM connector is specific to the 2015+ WRX (FA20 DIT).This ensures a properly sealed and solid connection between the EBCS Pro and the ECU. With its unique design, installation is simple and much quicker than competitors' products.
Ultra High Performance Custom Cartridge The custom made solenoid coil and valve are made specific to PERRIN specs. This allows the valve to operate almost 2 times faster than other designs, flow almost 50% more air, and work with OEM ECUs without causing check engine lights. To fully utilize the EBCS Pro, an ECU recalibration is NEEDED to ensure no over boosting occurs. Contact our tech department for further info.Short piston stroke. Balanced piston, immune to different boost levels. Very few parts. Solenoid isolated from contaminated air. Extremely long life. Operates in vacuum up to 120 psi.