Modern Automotive Performance
Modern Automotive Performance

2006 Mitsubishi Evolution IX SE - Hsun C.

Posted on 31 July 2012

[nggallery id=11] Wheel Horsepower - 543 Best E.T. - 11.64 Home Track - Bandimere Speedway
  • OS Giken TS2B twin-plate clutch/flywheel (MT031-BC3)
  • Kansai Service 4.11 final drive
  • Bill’s Englewood Driveshaft lightweight chromoly/aluminum 2-piece driveshaft
  • TRE MAX-LOCK 12-plate rear differential with TRE billet steel HD side cover
  • TRE-built transfer case with shot-peened ring gear and Wavetrac front differential
  • Speed-source braided clutch line
  • OEM clutch slave restrictor pill removed
  • Kartboy urethane shifter linkage bushings
  • Torque Solution aluminum driveshaft hanger bushings
  • STANCE Pro Comp2 (GR+2) double-adjustable coilovers w/ remote reservoirs (14kg/mm F/17kg/mm R)
  • Progress 25mm rear swaybar
  • Tanabe 25.4mm hollow front swaybar
  • Whiteline front roll center corrrection kit (KCA395)
  • Whiteline rear bump steer kit (KCA388)
  • Tein front strut tower brace
  • 18″ x 10″ +25 front, 18″ x 9.5″ +35 rear Rota DPT wheels w/ 275/35-18 Nitto NT01 (track)
  • 18″ x 10.5″ +15 front, 18″ x 9.5″ +38 rear Enkei RPF1 wheels w/ 285/30-18 Hoosier A6 (autocross)
  • 18″ x 9″ +20 front, +30 rear Volk Racing RE30 wheels w 265/35-18 (street/show)
  • Rotora Super Challenge RF6 forged 6-pot front calipers with ventilated titanium pistons and knockback springs
  • 355mm 2-piece slotted Rotora front rotors with Rotora H9 compound pads
  • OEM rear brakes with Hawk HP Plus pads
  • Rotora stainless steel lines
  • Castrol SRF fluid
  • Hot Lap Motorsports brake cooling ducts
  • Custom fiberglass inlets
  • Custom aluminum ball joint and ABS sensor/tie rod end heat shields
  • Autometer 22618 dual A-pillar gauge pod
  • SPA DG217 oil pressure/boost dual gauge
  • AEM UEGO wideband O2 gauge
  • Binary driver’s seat lowering brackets
  • MOMO NASCAR VTR passenger seat (fixed mount)
  • Autopower 60952 roll bar
  • Schroth Rallye 4 4-point harness
  • All OEM asphalt noise-damping mats removed
  • C-west replica fiberglass front bumper cover
  • Custom fiberglass oil cooler duct
  • OMP EB/571 tow hooks (F & R)
  • Gutted OEM hood
  • Gutted OEM trunklid
  • APR GT3 carbon fiber side mirrors
  • Perrin shorty antenna
  • APR GTC-300 61″ carbon fiber wing with custom 6061 aluminum risers
  • .09″ aluminum endplates
  • 1/8″ S/S guy wires
  • DIY plywood front splitter w height-adjustable mounting hardware and support rods
  • Custom 6061 aluminum dive planes
  • 1/16″ ABS plastic blockoff panels and splitter airdam

More Posts

0 comments

Leave a comment

All blog comments are checked prior to publishing

SEARCH OUR STORE